[dts] [PATCH v2] test_plan: add generic_flow_api_test_plan.rst
Peng Yuan
yuan.peng at intel.com
Mon Sep 18 06:08:57 CEST 2017
From: root <root at pengyuan.sh.intel.com>
Signed-off-by: root <root at pengyuan.sh.intel.com>
diff --git a/test_plans/generic_flow_api_test_plan.rst b/test_plans/generic_flow_api_test_plan.rst
new file mode 100644
index 0000000..3ce295b
--- /dev/null
+++ b/test_plans/generic_flow_api_test_plan.rst
@@ -0,0 +1,1407 @@
+.. Copyright (c) <2016>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=======================
+Generic filter/flow api
+=======================
+
+Prerequisites
+=============
+
+1. Hardware:
+ Fortville and Niantic
+
+2. software:
+ dpdk: http://dpdk.org/git/dpdk
+ scapy: http://www.secdev.org/projects/scapy/
+
+3. bind the pf to dpdk driver::
+
+ ./usertools/dpdk-devbind.py -b igb_uio 05:00.0
+
+
+Test case: Fortville ethertype
+==============================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules::
+
+ testpmd> flow validate 0 ingress pattern eth type is 0x0806 / end actions queue index 1 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x0806 / end actions queue index 2 / end
+ testpmd> flow validate 0 ingress pattern eth type is 0x08bb / end actions queue index 16 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x88bb / end actions queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 type is 0x88e5 / end actions queue index 4 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions drop / end
+ testpmd> flow validate 0 ingress pattern eth type is 0x88cc / end actions queue index 5 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x88cc / end actions queue index 6 / end
+
+the i40e don't support the 0x88cc eth type packet. so the last two commands
+failed.
+
+3. send packets::
+
+ pkt1 = Ether(dst="ff:ff:ff:ff:ff:ff")/ARP(pdst="192.168.1.1")
+ pkt2 = Ether(dst="00:11:22:33:44:55", type=0x88BB)/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55", type=0x88e5)/Raw('x' * 20)
+ pkt4 = Ether(dst="00:11:22:33:44:55", type=0x8864)/Raw('x' * 20)
+
+verify pkt1 to queue 2, and pkt2 to queue 3, pkt3 to queue 4, pkt4 dropped.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ verify pkt1 to queue 0, and pkt2 to queue 3, pkt3 to queue 4,
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ verify pkt1 to queue 0, and pkt2 to queue 0, pkt3 to queue 0, pkt4 to queue 0.
+ testpmd> flow list 0
+
+
+Test case: Fortville fdir for L2 payload
+========================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -w 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / end actions queue index 1 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x0807 / end actions queue index 2 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:55", type=0x0807)/Dot1Q(vlan=1)/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55", type=0x0807)/IP(src="192.168.0.5", dst="192.168.0.6")/Raw('x' * 20)
+
+check pkt1 to queue 1, pkt2 to queue 2, pkt3 to queue 2.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+
+Test case: Fortville fdir for flexbytes
+=======================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -w 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+1) l2-payload::
+
+ testpmd> flow create 0 ingress pattern eth type is 0x0807 / raw relative is 1 pattern is ab / end actions queue index 1 / end
+
+2) ipv4-other::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 4095 / ipv4 proto is 255 ttl is 40 / raw relative is 1 offset is 2 pattern is ab / raw relative is 1 offset is 10 pattern is abcdefghij / raw relative is 1 offset is 0 pattern is abcd / end actions queue index 2 / end
+
+3) ipv4-udp::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 2.2.2.4 dst is 2.2.2.5 / udp src is 22 dst is 23 / raw relative is 1 offset is 2 pattern is fhds / end actions queue index 3 / end
+
+4) ipv4-tcp::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 2.2.2.4 dst is 2.2.2.5 tos is 4 ttl is 3 / tcp src is 32 dst is 33 / raw relative is 1 offset is 2 pattern is hijk / end actions queue index 4 / end
+
+5) ipv4-sctp::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 2.2.2.4 dst is 2.2.2.5 / sctp src is 42 / raw relative is 1 offset is 2 pattern is abcdefghijklmnop / end actions queue index 5 / end
+
+6) ipv6-tcp::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / ipv6 src is 2001::1 dst is 2001::2 tc is 3 hop is 30 / tcp src is 32 dst is 33 / raw relative is 1 offset is 0 pattern is hijk / raw relative is 1 offset is 8 pattern is abcdefgh / end actions queue index 6 / end
+
+7) spec-mask(not supportted now, 6wind will update lately)
+restart testpmd, create new rules::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 2.2.2.4 dst is 2.2.2.5 / tcp src is 32 dst is 33 / raw relative is 1 offset is 2 pattern spec \x61\x62\x63\x64 pattern mask \x00\x00\xff\x01 / end actions queue index 7 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55", type=0x0807)/Raw(load="\x61\x62\x63\x64")
+ pkt2 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=4095)/IP(src="192.168.0.1", dst="192.168.0.2", proto=255, ttl=40)/Raw(load="xxabxxxxxxxxxxabcdefghijabcdefg")
+ pkt3 = Ether(dst="00:11:22:33:44:55")/IP(src="2.2.2.4", dst="2.2.2.5")/UDP(sport=22,dport=23)/Raw(load="fhfhdsdsfwef")
+ pkt4 = Ether(dst="00:11:22:33:44:55")/IP(src="2.2.2.4", dst="2.2.2.5", tos=4, ttl=3)/TCP(sport=32,dport=33)/Raw(load="fhhijk")
+ pkt5 = Ether(dst="00:11:22:33:44:55")/IP(src="2.2.2.4", dst="2.2.2.5")/SCTP(sport=42,dport=43,tag=1)/Raw(load="xxabcdefghijklmnopqrst")
+ pkt6 = Ether(dst="00:11:22:33:44:55")/IP(src="2.2.2.4", dst="2.2.2.5")/SCTP(sport=42,dport=43,tag=1)/Raw(load="xxabxxxabcddxxabcdefghijklmn")
+ pkt7 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)/IPv6(src="2001::1", dst="2001::2", tc=3, hlim=30)/TCP(sport=32,dport=33)/Raw(load="hijkabcdefghabcdefghijklmn")
+
+pkt8-pkt10 are not supported now::
+
+ pkt8 = Ether(dst="00:11:22:33:44:55")/IP(src="2.2.2.4", dst="2.2.2.5")/TCP(sport=32,dport=33)/Raw(load="\x68\x69\x61\x62\x63\x64")
+ pkt9 = Ether(dst="00:11:22:33:44:55")/IP(src="2.2.2.4", dst="2.2.2.5")/TCP(sport=32,dport=33)/Raw(load="\x68\x69\x68\x69\x63\x74")
+ pkt10 = Ether(dst="00:11:22:33:44:55")/IP(src="2.2.2.4", dst="2.2.2.5")/TCP(sport=32,dport=33)/Raw(load="\x68\x69\x61\x62\x63\x65")
+
+check pkt1 to pkt5 are received by queue 1 to queue 5, pkt6 to queue 0,
+pkt7 to queue6. pkt8 to queue7, pkt8 and pkt9 to queue 0.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+
+Test case: Fortville fdir for ipv4
+==================================
+
+Prerequisites:
+add two vfs on dpdk pf, then bind the vfs to vfio-pci::
+
+ echo 2 >/sys/bus/pci/devices/0000:05:00.0/max_vfs
+ ./usertools/dpdk-devbind.py -b vfio-pci 05:02.0 05:02.1
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -w 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1e0000 -n 4 -w 05:02.0 --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1e00000 -n 4 -w 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+1) ipv4-other::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 proto is 3 / end actions queue index 1 / end
+
+2) ipv4-udp::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 ttl is 3 / udp src is 22 dst is 23 / end actions queue index 2 / end
+
+3) ipv4-tcp::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 3 / tcp src is 32 dst is 33 / end actions queue index 3 / end
+
+4) ipv4-sctp::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 3 ttl is 3 / sctp src is 44 dst is 45 tag is 1 / end actions queue index 4 / end
+
+5) ipv4-other-vf0::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 proto is 3 / vf id is 0 / end actions queue index 1 / end
+
+6) ipv4-sctp-vf1::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 4 / sctp src is 46 dst is 47 tag is 1 / vf id is 1 / end actions queue index 2 / end
+
+7) ipv4-sctp drop::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.5 dst is 192.168.0.6 tos is 3 ttl is 3 / sctp src is 44 dst is 45 tag is 1 / end actions drop / end
+
+8) ipv4-sctp passthru-flag::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 3 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 4 / sctp src is 44 dst is 45 tag is 1 / end actions passthru / flag / end
+
+9) ipv4-udp queue-flag::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 ttl is 4 / udp src is 22 dst is 23 / end actions queue index 5 / flag / end
+
+10) ipv4-tcp queue-mark::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 / tcp src is 32 dst is 33 / end actions queue index 6 / mark id 3 / end
+
+11) ipv4-other passthru-mark::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.4 proto is 3 / end actions passthru / mark id 4 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2", proto=3)/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2", ttl=3)/UDP(sport=22,dport=23)/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2", tos=3)/TCP(sport=32,dport=33)/Raw('x' * 20)
+ pkt4 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)/IP(src="192.168.0.1", dst="192.168.0.2", tos=3, ttl=3)/SCTP(sport=44,dport=45,tag=1)/SCTPChunkData(data="X" * 20)
+ pkt5 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=2)/IP(src="192.168.0.1", dst="192.168.0.2", tos=4, ttl=4)/SCTP(sport=46,dport=47,tag=1)/Raw('x' * 20)
+ pkt6 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.5", dst="192.168.0.6", tos=3, ttl=3)/SCTP(sport=44,dport=45,tag=1)/SCTPChunkData(data="X" * 20)
+ pkt7 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=3)/IP(src="192.168.0.1", dst="192.168.0.2", tos=4, ttl=4)/SCTP(sport=44,dport=45,tag=1)/Raw('x' * 20)
+ pkt8 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2", ttl=4)/UDP(sport=22,dport=23)/Raw('x' * 20)
+ pkt9 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2", tos=4)/TCP(sport=32,dport=33)/Raw('x' * 20)
+ pkt10 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.3", dst="192.168.0.4", proto=3)/Raw('x' * 20)
+
+verify packet
+pkt1 to queue 1 and vf0 queue 1, pkt2 to queue 2, pkt3 to queue 3,
+pkt4 to queue 4, pkt5 to vf1 queue 2, pkt6 can't be received by pf.
+if not "--disable-rss",
+pkt7 to queue 0, FDIR matched hash 0 ID 0, pkt8 to queue 5,
+FDIR matched hash 0 ID 0, pkt9 to queue 6, FDIR matched ID 3,
+pkt10 queue determined by rss rule, FDIR matched ID 4.
+if "--disable-rss"
+pkt7-9 has same result with above, pkt10 to queue 0, FDIR matched ID 4.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+
+Test case: Fortville fdir for ipv6
+==================================
+
+Prerequisites:
+add two vfs on dpdk pf, then bind the vfs to vfio-pci::
+
+ echo 2 >/sys/bus/pci/devices/0000:05:00.0/max_vfs
+ ./usertools/dpdk-devbind.py -b vfio-pci 05:02.0 05:02.1
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -w 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1e0000 -n 4 -w 05:02.0 --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1e00000 -n 4 -w 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+1) ipv6-other::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / ipv6 src is 2001::1 dst is 2001::2 tc is 1 proto is 5 hop is 10 / end actions queue index 1 / end
+
+2) ipv6-udp::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / ipv6 src is 2001::1 dst is 2001::2 tc is 2 hop is 20 / udp src is 22 dst is 23 / end actions queue index 2 / end
+
+3) ipv6-tcp::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 3 / ipv6 src is 2001::1 dst is 2001::2 tc is 3 hop is 30 / tcp src is 32 dst is 33 / end actions queue index 3 / end
+
+4) ipv6-sctp::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 4 / ipv6 src is 2001::1 dst is 2001::2 tc is 4 hop is 40 / sctp src is 44 dst is 45 tag is 1 / end actions queue index 4 / end
+
+5) ipv6-other-vf0::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 5 / ipv6 src is 2001::3 dst is 2001::4 tc is 5 proto is 5 hop is 50 / vf id is 0 / end actions queue index 1 / end
+
+6) ipv6-tcp-vf1::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 4095 / ipv6 src is 2001::3 dst is 2001::4 tc is 6 hop is 60 / tcp src is 32 dst is 33 / vf id is 1 / end actions queue index 3 / end
+
+7) ipv6-sctp-drop::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 7 / ipv6 src is 2001::1 dst is 2001::2 tc is 7 hop is 70 / sctp src is 44 dst is 45 tag is 1 / end actions drop / end
+
+8) ipv6-tcp-vf1-drop::
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 8 / ipv6 src is 2001::3 dst is 2001::4 tc is 8 hop is 80 / tcp src is 32 dst is 33 / vf id is 1 / end actions drop / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)/IPv6(src="2001::1", dst="2001::2", tc=1, nh=5, hlim=10)/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=2)/IPv6(src="2001::1", dst="2001::2", tc=2, hlim=20)/UDP(sport=22,dport=23)/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=3)/IPv6(src="2001::1", dst="2001::2", tc=3, hlim=30)/TCP(sport=32,dport=33)/Raw('x' * 20)
+ pkt4 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=4)/IPv6(src="2001::1", dst="2001::2", tc=4, nh=132, hlim=40)/SCTP(sport=44,dport=45,tag=1)/SCTPChunkData(data="X" * 20)
+ pkt5 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=5)/IPv6(src="2001::3", dst="2001::4", tc=5, nh=5, hlim=50)/Raw('x' * 20)
+ pkt6 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=4095)/IPv6(src="2001::3", dst="2001::4", tc=6, hlim=60)/TCP(sport=32,dport=33)/Raw('x' * 20)
+ pkt7 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=7)/IPv6(src="2001::1", dst="2001::2", tc=7, nh=132, hlim=70)/SCTP(sport=44,dport=45,tag=1)/SCTPChunkData(data="X" * 20)
+ pkt8 = Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=8)/IPv6(src="2001::3", dst="2001::4", tc=8, hlim=80)/TCP(sport=32,dport=33)/Raw('x' * 20)
+
+verify packet
+pkt1 to queue 1 and vf queue 1, pkt2 to queue 2, pkt3 to queue 3,
+pkt4 to queue 4, pkt5 to vf0 queue 1, pkt6 to vf1 queue 3,
+pkt7 can't be received by pf, pkt8 can't be received by vf1.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+
+Test case: Fortville fdir wrong parameters
+==========================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -w 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+1) Exceeds maxmial payload limit::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 2.2.2.4 dst is 2.2.2.5 / sctp src is 42 / raw relative is 1 offset is 2 pattern is abcdefghijklmnopq / end actions queue index 5 / end
+
+it shows "Caught error type 9 (specific pattern item): cause: 0x7fd87ff60160,
+Exceeds maxmial payload limit".
+
+2) can't set mac_addr when setting fdir filter::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 4095 / ipv6 src is 2001::3 dst is 2001::4 tc is 6 hop is 60 / tcp src is 32 dst is 33 / end actions queue index 3 / end
+
+it shows "Caught error type 9 (specific pattern item): cause: 0x7f463ff60100,
+Invalid MAC_addr mask".
+
+3) can't change the configuration of the same packet type::
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 3 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 4 / sctp src is 44 dst is 45 tag is 1 / end actions passthru / flag / end
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 4 / sctp src is 34 dst is 35 tag is 1 / end actions passthru / flag / end
+
+it shows "Caught error type 9 (specific pattern item): cause: 0x7feabff60120,
+Conflict with the first rule's input set".
+
+4) invalid queue ID::
+
+ testpmd> flow create 0 ingress pattern eth / ipv6 src is 2001::3 dst is 2001::4 tc is 6 hop is 60 / tcp src is 32 dst is 33 / end actions queue index 16 / end
+
+it shows "Caught error type 11 (specific action): cause: 0x7ffc7bb9a338,
+Invalid queue ID for FDIR".
+
+If create a rule on vf that has invalid queue ID::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 proto is 3 / vf id is 0 / end actions queue index 4 / end
+
+it shows "Caught error type 11 (specific action): cause: 0x7ffc7bb9a338,
+Invalid queue ID for FDIR".
+
+
+Note:
+
+/// not support ip fragment ///
+
+
+Test case: Fortville tunnel vxlan
+=================================
+
+Prerequisites
+add a vf on dpdk pf, then bind the vf to vfio-pci::
+
+ echo 1 >/sys/bus/pci/devices/0000:05:00.0/max_vfs
+ ./usertools/dpdk-devbind.py -b vfio-pci 05:02.0
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -w 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --txqflags=0x0 --disable-rss
+ testpmd> rx_vxlan_port add 4789 0
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> set promisc all off
+ testpmd> start
+ the pf's mac address is 00:00:00:00:01:00
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1e0000 -n 4 -w 05:02.0 --file-prefix=vf --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --txqflags=0x0 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> set promisc all off
+ testpmd> start
+
+the vf's mac address is D2:8C:1A:50:2A:78
+
+2. create filter rules
+1) inner mac + actions pf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan / eth dst is 00:11:22:33:44:55 / end actions pf / queue index 1 / end
+
+2) vni + inner mac + actions pf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan vni is 2 / eth dst is 00:11:22:33:44:55 / end actions pf / queue index 2 / end
+
+3) inner mac + inner vlan +actions pf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan / eth dst is 00:11:22:33:44:55 / vlan tci is 10 / end actions pf / queue index 3 / end
+
+4) vni + inner mac + inner vlan + actions pf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan vni is 4 / eth dst is 00:11:22:33:44:55 / vlan tci is 20 / end actions pf / queue index 4 / end
+
+5) inner mac + outer mac + vni + actions pf::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:66 / ipv4 / udp / vxlan vni is 5 / eth dst is 00:11:22:33:44:55 / end actions pf / queue index 5 / end
+
+6) vni + inner mac + inner vlan + actions vf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan vni is 6 / eth dst is 00:11:22:33:44:55 / vlan tci is 30 / end actions vf id 0 / queue index 1 / end
+
+7) inner mac + outer mac + vni + actions vf::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:66 / ipv4 / udp / vxlan vni is 7 / eth dst is 00:11:22:33:44:55 / end actions vf id 0 / queue index 3 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan()/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan(vni=2)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt31 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan()/Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=10)/IP()/TCP()/Raw('x' * 20)
+ pkt32 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan()/Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=11)/IP()/TCP()/Raw('x' * 20)
+ pkt4 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan(vni=4)/Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=20)/IP()/TCP()/Raw('x' * 20)
+ pkt51 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan(vni=5)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt52 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan(vni=4)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt53 = Ether(dst="00:00:00:00:01:00")/IP()/UDP()/Vxlan(vni=5)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt54 = Ether(dst="00:11:22:33:44:77")/IP()/UDP()/Vxlan(vni=5)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt55 = Ether(dst="00:00:00:00:01:00")/IP()/UDP()/Vxlan(vni=5)/Ether(dst="00:11:22:33:44:77")/IP()/TCP()/Raw('x' * 20)
+ pkt56 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan(vni=5)/Ether(dst="00:11:22:33:44:77")/IP()/TCP()/Raw('x' * 20)
+ pkt61 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan(vni=6)/Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=30)/IP()/TCP()/Raw('x' * 20)
+ pkt62 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan(vni=6)/Ether(dst="00:11:22:33:44:77")/Dot1Q(vlan=30)/IP()/TCP()/Raw('x' * 20)
+ pkt63 = Ether(dst="D2:8C:1A:50:2A:78")/IP()/UDP()/Vxlan(vni=6)/Ether(dst="00:11:22:33:44:77")/Dot1Q(vlan=30)/IP()/TCP()/Raw('x' * 20)
+ pkt64 = Ether(dst="00:00:00:00:01:00")/IP()/UDP()/Vxlan(vni=6)/Ether(dst="00:11:22:33:44:77")/Dot1Q(vlan=30)/IP()/TCP()/Raw('x' * 20)
+ pkt71 = Ether(dst="00:11:22:33:44:66")/IP()/UDP()/Vxlan(vni=7)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt72 = Ether(dst="D2:8C:1A:50:2A:78")/IP()/UDP()/Vxlan(vni=7)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt73 = Ether(dst="D2:8C:1A:50:2A:78")/IP()/UDP()/Vxlan(vni=7)/Ether(dst="00:11:22:33:44:77")/IP()/TCP()/Raw('x' * 20)
+ pkt74 = Ether(dst="00:00:00:00:01:00")/IP()/UDP()/Vxlan(vni=7)/Ether(dst="00:11:22:33:44:77")/IP()/TCP()/Raw('x' * 20)
+
+verify pkt1 received by pf queue 1, pkt2 to pf queue 2,
+pkt31 to pf queue 3, pkt32 to pf queue 1, pkt4 to pf queue 4,
+pkt51 to pf queue 5, pkt52 to pf queue 1, pkt53 to pf queue 1,
+pkt54 to pf queue 1, pkt55 to pf queue 0, pf can't receive pkt56.
+pkt61 to vf queue 1 and pf queue 1, pf and vf can't receive pkt62,
+pkt63 to vf queue 0, pkt64 to pf queue 0, vf can't receive pkt64,
+pkt71 to vf queue 3 and pf queue 1, pkt72 to pf queue 1, vf can't receive
+pkt72, pkt73 to vf queue 0, pkt74 to pf queue 0, vf can't receive pkt74.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+
+verify pkt51 to pf queue 5, pkt53 and pkt55 to pf queue 0,
+pf can't receive pkt52,pkt54 and pkt56. pkt71 to vf queue 3,
+pkt72 and pkt73 to vf queue 0, pkt74 to pf queue 0, vf can't receive pkt74.
+Then::
+
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+
+Test case: Fortville tunnel nvgre
+=================================
+
+Prerequisites:
+add two vfs on dpdk pf, then bind the vfs to vfio-pci::
+
+ echo 2 >/sys/bus/pci/devices/0000:05:00.0/max_vfs
+ ./usertools/dpdk-devbind.py -b vfio-pci 05:02.0 05:02.1
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -w 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --txqflags=0x0
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> set promisc all off
+ testpmd> start
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1e0000 -n 4 -w 05:02.0 --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --txqflags=0x0
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> set promisc all off
+ testpmd> start
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1e00000 -n 4 -w 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --txqflags=0x0
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> set promisc all off
+ testpmd> start
+
+the pf's mac address is 00:00:00:00:01:00
+the vf0's mac address is 54:52:00:00:00:01
+the vf1's mac address is 54:52:00:00:00:02
+
+2. create filter rules
+1) inner mac + actions pf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre / eth dst is 00:11:22:33:44:55 / end actions pf / queue index 1 / end
+
+2) tni + inner mac + actions pf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre tni is 2 / eth dst is 00:11:22:33:44:55 / end actions pf / queue index 2 / end
+
+3) inner mac + inner vlan + actions pf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre / eth dst is 00:11:22:33:44:55 / vlan tci is 30 / end actions pf / queue index 3 / end
+
+4) tni + inner mac + inner vlan + actions pf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre tni is 0x112244 / eth dst is 00:11:22:33:44:55 / vlan tci is 40 / end actions pf / queue index 4 / end
+
+5) inner mac + outer mac + tni + actions pf::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:66 / ipv4 / nvgre tni is 0x112255 / eth dst is 00:11:22:33:44:55 / end actions pf / queue index 5 / end
+
+6) tni + inner mac + inner vlan + actions vf::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre tni is 0x112266 / eth dst is 00:11:22:33:44:55 / vlan tci is 60 / end actions vf id 0 / queue index 1 / end
+
+7) inner mac + outer mac + tni + actions vf::
+
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:66 / ipv4 / nvgre tni is 0x112277 / eth dst is 00:11:22:33:44:55 / end actions vf id 1 / queue index 3 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE()/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE(TNI=2)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt31 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE()/Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=30)/IP()/TCP()/Raw('x' * 20)
+ pkt32 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE()/Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=31)/IP()/TCP()/Raw('x' * 20)
+ pkt4 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE(TNI=0x112244)/Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=40)/IP()/TCP()/Raw('x' * 20)
+ pkt51 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE(TNI=0x112255)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt52 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE(TNI=0x112256)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt53 = Ether(dst="00:00:00:00:01:00")/IP()/NVGRE(TNI=0x112255)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt54 = Ether(dst="00:11:22:33:44:77")/IP()/NVGRE(TNI=0x112255)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt55 = Ether(dst="00:00:00:00:01:00")/IP()/NVGRE(TNI=0x112255)/Ether(dst="00:11:22:33:44:77")/IP()/TCP()/Raw('x' * 20)
+ pkt56 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE(TNI=0x112255)/Ether(dst="00:11:22:33:44:77")/IP()/TCP()/Raw('x' * 20)
+ pkt61 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE(TNI=0x112266)/Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=60)/IP()/TCP()/Raw('x' * 20)
+ pkt62 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE(TNI=0x112266)/Ether(dst="00:11:22:33:44:77")/Dot1Q(vlan=60)/IP()/TCP()/Raw('x' * 20)
+ pkt63 = Ether(dst="54:52:00:00:00:01")/IP()/NVGRE(TNI=0x112266)/Ether(dst="00:11:22:33:44:77")/Dot1Q(vlan=60)/IP()/TCP()/Raw('x' * 20)
+ pkt64 = Ether(dst="00:00:00:00:01:00")/IP()/NVGRE(TNI=0x112266)/Ether(dst="00:11:22:33:44:77")/Dot1Q(vlan=60)/IP()/TCP()/Raw('x' * 20)
+ pkt71 = Ether(dst="00:11:22:33:44:66")/IP()/NVGRE(TNI=0x112277)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt72 = Ether(dst="54:52:00:00:00:02")/IP()/NVGRE(TNI=0x112277)/Ether(dst="00:11:22:33:44:55")/IP()/TCP()/Raw('x' * 20)
+ pkt73 = Ether(dst="54:52:00:00:00:02")/IP()/NVGRE(TNI=0x112277)/Ether(dst="00:11:22:33:44:77")/IP()/TCP()/Raw('x' * 20)
+ pkt74 = Ether(dst="00:00:00:00:01:00")/IP()/NVGRE(TNI=0x112277)/Ether(dst="00:11:22:33:44:77")/IP()/TCP()/Raw('x' * 20)
+
+verify pkt1 received by pf queue 1, pkt2 to pf queue 2,
+pkt31 to pf queue 3, pkt32 to pf queue 1, pkt4 to pf queue 4,
+pkt51 to pf queue 5, pkt52 to pf queue 1, pkt53 to pf queue 1,
+pkt54 to pf queue 1, pkt55 to pf queue 0, pf can't receive pkt56.
+pkt61 to vf0 queue 1 and pf queue 1, pf and vf0 can't receive pkt62,
+pkt63 to vf0 queue 0, pkt64 to pf queue 0, vf0 can't receive pkt64,
+pkt71 to vf1 queue 3 and pf queue 1, pkt72 to pf queue 1, vf1 can't receive
+pkt72, pkt73 to vf1 queue 0, pkt74 to pf queue 0, vf1 can't receive pkt74.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+
+verify pkt51 to pf queue 5, pkt53 and pkt55 to pf queue 0,
+pf can't receive pkt52,pkt54 and pkt56. pkt71 to vf1 queue 3,
+pkt72 and pkt73 to vf1 queue 0, pkt74 to pf queue 0, vf1 can't receive pkt74.
+Then::
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+
+Test case: IXGBE SYN
+====================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+1)ipv4::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / tcp flags spec 0x02 flags mask 0x02 / end actions queue index 3 / end
+
+2)ipv6::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow create 0 ingress pattern eth / ipv6 / tcp flags spec 0x02 flags mask 0x02 / end actions queue index 4 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(dport=80,flags="S")/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(dport=80,flags="PA")/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/TCP(dport=80,flags="S")/Raw('x' * 20)
+ pkt4 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/TCP(dport=80,flags="PA")/Raw('x' * 20)
+
+ipv4 verify pkt1 to queue 3, pkt2 to queue 0, pkt3 to queue 3, pkt4 to queue 0
+ipv6 verify pkt1 to queue 4, pkt2 to queue 0, pkt3 to queue 4, pkt4 to queue 0
+notes: the out packet default is Flags [S], so if the flags is omitted in sent
+pkt, the pkt will be into queue 3 or queue 4.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+
+Test case: IXGBE n-tuple(supported by x540 and 82599)
+=====================================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+1) ipv4-other::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions queue index 1 / end
+
+2) ipv4-udp::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 proto is 17 / udp src is 22 dst is 23 / end actions queue index 2 / end
+
+3) ipv4-tcp::
+
+ testpmd> flow create 0 ingress pattern ipv4 src is 192.168.0.2 dst is 192.168.0.3 proto is 6 / tcp src is 32 dst is 33 / end actions queue index 3 / end
+
+4) ipv4-sctp::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 proto is 132 / sctp src is 44 dst is 45 / end actions queue index 4 / end
+
+3. send packets::
+
+ pkt11 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)
+ pkt12 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.2", dst="192.168.0.3")/Raw('x' * 20)
+ pkt21 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.2", dst="192.168.0.3")/UDP(sport=22,dport=23)/Raw('x' * 20)
+ pkt22 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.2", dst="192.168.0.3")/UDP(sport=22,dport=24)/Raw('x' * 20)
+ pkt31 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.2", dst="192.168.0.3")/TCP(sport=32,dport=33)/Raw('x' * 20)
+ pkt32 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.2", dst="192.168.0.3")/TCP(sport=34,dport=33)/Raw('x' * 20)
+ pkt41 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.2", dst="192.168.0.3")/SCTP(sport=44,dport=45)/Raw('x' * 20)
+ pkt42 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.2", dst="192.168.0.3")/SCTP(sport=44,dport=46)/Raw('x' * 20)
+ pkt5 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/SCTP(sport=44,dport=45)/Raw('x' * 20)
+ pkt6 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/TCP(sport=32,dport=33)/Raw('x' * 20)
+
+verify pkt11 to queue 1, pkt12 to queue 0,
+pkt21 to queue 2, pkt22 to queue 0,
+pkt31 to queue 3, pkt32 to queue 0,
+pkt41 to queue 4, pkt42 to queue 0,
+pkt5 to queue 1, pkt6 to queue 0,
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+
+Test case: IXGBE ethertype
+==========================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules::
+
+ testpmd> flow validate 0 ingress pattern eth type is 0x0806 / end actions queue index 3 / end
+ testpmd> flow validate 0 ingress pattern eth type is 0x86DD / end actions queue index 5 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x0806 / end actions queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x88cc / end actions queue index 4 / end
+
+the ixgbe don't support the 0x88DD eth type packet. so the second command
+failed.
+
+3. send packets::
+
+ pkt1 = Ether(dst="ff:ff:ff:ff:ff:ff")/ARP(pdst="192.168.1.1")
+ pkt2 = Ether(dst="00:11:22:33:44:55", type=0x88CC)/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55", type=0x86DD)/Raw('x' * 20)
+
+verify pkt1 to queue 3, and pkt2 to queue 4, pkt3 to queue 0.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+
+verify pkt1 to queue 0, and pkt2 to queue 4.
+Then::
+
+ testpmd> flow list 0
+ testpmd> flow flush 0
+
+verify pkt1 to queue 0, and pkt2 to queue 0.
+Then::
+
+ testpmd> flow list 0
+
+
+Test case: IXGBE L2-tunnel(supported by x552 and x550)
+======================================================
+
+Prerequisites:
+add two vfs on dpdk pf, then bind the vfs to vfio-pci::
+
+ echo 2 >/sys/bus/pci/devices/0000:05:00.0/max_vfs
+ ./usertools/dpdk-devbind.py -b vfio-pci 05:02.0 05:02.1
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -w 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1e0000 -n 4 -w 05:02.0 --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1e00000 -n 4 -w 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+Enabling ability of parsing E-tag packet, set on pf::
+
+ testpmd> port config 0 l2-tunnel E-tag enable
+
+Enable E-tag packet forwarding, set on pf::
+
+ testpmd> E-tag set forwarding on port 0
+
+2. create filter rules::
+
+ testpmd> flow create 0 ingress pattern e_tag grp_ecid_b is 0x1309 / end actions queue index 0 / end
+ testpmd> flow create 0 ingress pattern e_tag grp_ecid_b is 0x1308 / end actions queue index 1 / end
+ testpmd> flow create 0 ingress pattern e_tag grp_ecid_b is 0x1307 / end actions queue index 2 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55")/Dot1BR(GRP=0x1, ECIDbase=0x309)/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:55")/Dot1BR(GRP=0x1, ECIDbase=0x308)/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55")/Dot1BR(GRP=0x1, ECIDbase=0x307)/Raw('x' * 20)
+ pkt4 = Ether(dst="00:11:22:33:44:55")/Dot1BR(GRP=0x2, ECIDbase=0x309)/Raw('x' * 20)
+
+verify pkt1 to vf0 queue0, pkt2 to vf1 queue0, pkt3 to pf queue0,
+pkt4 can't received by pf and vfs.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+
+Test case: IXGBE fdir for ipv4
+==============================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+1) ipv4-other
+(only support by 82599 and x540, this rule matches the n-tuple)::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions queue index 1 / end
+
+2) ipv4-udp::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.4 / udp src is 22 dst is 23 / end actions queue index 2 / end
+
+3) ipv4-tcp::
+
+ testpmd> flow create 0 ingress pattern ipv4 src is 192.168.0.3 dst is 192.168.0.4 / tcp src is 32 dst is 33 / end actions queue index 3 / end
+
+4) ipv4-sctp
+(x550/x552, 82599 can support this format, because it matches n-tuple)::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.4 / sctp src is 44 dst is 45 / end actions queue index 4 / end
+
+ipv4-sctp(82599/x540)::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.4 / sctp / end actions queue index 4 / end
+
+
+5) ipv4-sctp-drop(x550/x552)::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.4 / sctp src is 46 dst is 47 / end actions drop / end
+
+ipv4-sctp-drop(82599/x540)::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.5 dst is 192.168.0.6 / sctp / end actions drop / end
+
+notes: 82599 don't support the sctp port match drop, x550 and x552 support it.
+
+6) ipv4-udp-flexbytes::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / udp src is 24 dst is 25 / raw relative is 0 search is 0 offset is 44 limit is 0 pattern is 86 / end actions queue index 5 / end
+
+7) ipv4-tcp-flexbytes::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.4 / tcp src is 22 dst is 23 / raw relative spec 0 relative mask 1 search spec 0 search mask 1 offset spec 54 offset mask 0xffffffff limit spec 0 limit mask 0xffff pattern is ab pattern is cd / end actions queue index 6 / end
+
+notes: the second pattern will overlap the first pattern.
+the rule 6 and 7 should be created after the testpmd reset,
+because the flexbytes rule is global bit masks.
+
+8) invalid queue id::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / udp src is 32 dst is 33 / end actions queue index 16 / end
+
+notes: the rule can't be created successfully because the queue id
+exceeds the max queue id.
+
+3. send packets::
+
+ pkt1 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)
+ pkt2 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.3", dst="192.168.0.4")/UDP(sport=22,dport=23)/Raw('x' * 20)
+ pkt3 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.3", dst="192.168.0.4")/TCP(sport=32,dport=33)/Raw('x' * 20)
+
+for x552/x550::
+
+ pkt41 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.3", dst="192.168.0.4")/SCTP(sport=44,dport=45)/Raw('x' * 20)
+ pkt42 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.3", dst="192.168.0.4")/SCTP(sport=42,dport=43)/Raw('x' * 20)
+
+for 82599/x540::
+
+ pkt41 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.3", dst="192.168.0.4")/SCTP()/Raw('x' * 20)
+ pkt42 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.3", dst="192.168.0.5")/SCTP()/Raw('x' * 20)
+
+for x552/x550::
+
+ pkt5 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.3", dst="192.168.0.4")/SCTP(sport=46,dport=47)/Raw('x' * 20)
+
+for 82599/x540::
+
+ pkt5 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.5", dst="192.168.0.6")/SCTP()/Raw('x' * 20)
+ pkt6 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.1", dst="192.168.0.2")/UDP(sport=24,dport=25)/Raw(load="xx86ddef")
+ pkt7 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.3", dst="192.168.0.4")/TCP(sport=22,dport=23)/Raw(load="abcdxxx")
+ pkt8 = Ether(dst="A0:36:9F:7B:C5:A9")/IP(src="192.168.0.3", dst="192.168.0.4")/TCP(sport=22,dport=23)/Raw(load="cdcdxxx")
+
+verify pkt1 to pkt3 can be received by queue 1 to queue 3 correctly.
+pkt41 to queue 4, pkt42 to queue 0, pkt5 couldn't be received.
+pkt6 to queue 5, pkt7 to queue 0, pkt8 to queue 6.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+Test case: IXGBE fdir for signature(ipv4/ipv6)
+==============================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=signature
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+1) ipv6-other
+(82599 support this rule,x552 and x550 don't support this rule)::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 1 / ipv6 src is 2001::1 dst is 2001::2 / end actions queue index 1 / end
+
+2) ipv6-udp::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh spec 2 thresh last 5 thresh mask 0xffffffff / ipv6 src is 2001::1 dst is 2001::2 / udp src is 22 dst is 23 / end actions queue index 2 / end
+
+3) ipv6-tcp::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 3 / ipv6 src is 2001::1 dst is 2001::2 / tcp src is 32 dst is 33 / end actions queue index 3 / end
+
+4) ipv6-sctp
+(x552 and x550)::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 4 / ipv6 src is 2001::1 dst is 2001::2 / sctp src is 44 dst is 45 / end actions queue index 4 / end
+
+(82599 and x540)::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 4 / ipv6 src is 2001::1 dst is 2001::2 / sctp / end actions queue index 4 / end
+
+5) ipv6-other-flexbytes
+(just for 82599/x540)::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 6 / ipv6 src is 2001::1 dst is 2001::2 / raw relative is 0 search is 0 offset is 56 limit is 0 pattern is 86 / end actions queue index 5 / end
+
+notes: this rule can be created successfully on 82599/x540, but can't be
+created successfully on x552/x550, because it's an ipv4-other rule.
+but the offset<=62, the mac header is 14bytes, the ipv6 header is 40 bytes,
+the shortest L4 header(udp header) is 8bytes, the total header is 62 bytes,
+there is no payload can be set offset. so we don't test the ipv6 flexbytes
+on x550/x552.
+according to hardware limitation, signature mode does not support drop action,
+while IPv6 rely on signature mode, so it is expected result that a IPv6 flow
+with drop action can't be created
+
+6) ipv4-other
+(82599 support this rule,x552 and x550 don't support this rule)::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 1 / eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions queue index 6 / end
+
+7) ipv4-udp::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 2 / eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / udp src is 22 dst is 23 / end actions queue index 7 / end
+
+8) ipv4-tcp::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 3 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / tcp src is 32 dst is 33 / end actions queue index 8 / end
+
+9) ipv4-sctp(x550/x552)::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 4 / eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / sctp src is 44 dst is 45 / end actions queue index 9 / end
+
+ipv4-sctp(82599/x540)::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 5 / eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / sctp / end actions queue index 9 / end
+
+notes: if set the ipv4-sctp rule with sctp ports on 82599, it will fail
+to create the rule.
+
+10) ipv4-sctp-flexbytes(x550/x552)::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 6 / eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / sctp src is 24 dst is 25 / raw relative is 0 search is 0 offset is 48 limit is 0 pattern is ab / end actions queue index 10 / end
+
+ipv4-sctp-flexbytes(82599/x540)::
+
+ testpmd> flow create 0 ingress pattern fuzzy thresh is 6 / eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / sctp / raw relative is 0 search is 0 offset is 48 limit is 0 pattern is ab / end actions queue index 10 / end
+
+notes: you need to reset testpmd before create this rule,
+because it's conflict with the rule 9.
+
+3. send packets
+ipv6 packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/UDP(sport=22,dport=23)/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/TCP(sport=32,dport=33)/Raw(load="xxxxabcd")
+
+for x552/x550::
+
+ pkt4 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2",nh=132)/SCTP(sport=44,dport=45,tag=1)/SCTPChunkData(data="cdxxxx")
+ pkt5 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2",nh=132)/SCTP(sport=46,dport=47,tag=1)/SCTPChunkData(data="cdxxxx")
+
+for 82599/x540::
+
+ pkt41 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2",nh=132)/SCTP(sport=44,dport=45,tag=1)/SCTPChunkData(data="cdxxxx")
+ pkt42 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2",nh=132)/SCTP()/SCTPChunkData(data="cdxxxx")
+ pkt51 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2",nh=132)/SCTP(sport=46,dport=47,tag=1)/SCTPChunkData(data="cdxxxx")
+ pkt52 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::3", dst="2001::4",nh=132)/SCTP(sport=46,dport=47,tag=1)/SCTPChunkData(data="cdxxxx")
+ pkt6 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/Raw(load="xx86abcd")
+ pkt7 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/Raw(load="xxx86abcd")
+
+ipv4 packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/UDP(sport=22,dport=23)/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=32,dport=33)/Raw('x' * 20)
+
+for x552/x550::
+
+ pkt41 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/SCTP(sport=44,dport=45)/Raw('x' * 20)
+ pkt42 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/SCTP(sport=42,dport=43)/Raw('x' * 20)
+
+for 82599/x540::
+
+ pkt41 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/SCTP()/Raw('x' * 20)
+ pkt42 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.3")/SCTP()/Raw('x' * 20)
+ pkt51 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/SCTP(sport=24,dport=25)/Raw(load="xxabcdef")
+ pkt52 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/SCTP(sport=24,dport=25)/Raw(load="xxaccdef")
+
+verify ipv6 packets:
+for x552/x550:
+pkt1 to queue 0, pkt2 to queue 2, pkt3 to queue 3.
+pkt4 to queue 4, pkt5 to queue 0.
+
+for 82599/x540:
+packet pkt1 to pkt3 can be received by queue 1 to queue 3 correctly.
+pkt41 and pkt42 to queue 4, pkt51 to queue 4, pkt52 to queue 0.
+pkt6 to queue 5, pkt7 to queue 0.
+
+verify ipv4 packets:
+for x552/x550:
+pk1 to queue 0, pkt2 to queue 7, pkt3 to queue 8.
+pkt41 to queue 9, pkt42 to queue 0,
+pkt51 to queue 10, pkt52 to queue 0.
+
+for 82599/x540:
+pkt1 to pkt3 can be received by queue 6 to queue 8 correctly.
+pkt41 to queue 9, pkt42 to queue 0,
+pkt51 to queue 10, pkt52 to queue 0.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+Test case: IXGBE fdir for mac/vlan(support by x540, x552, x550)
+===============================================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect-mac-vlan
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+ testpmd> vlan set strip off 0
+ testpmd> vlan set filter off 0
+
+2. create filter rules::
+
+ testpmd> flow create 0 ingress pattern eth dst is A0:36:9F:7B:C5:A9 / vlan tpid is 0x8100 tci is 1 / end actions queue index 9 / end
+ testpmd> flow create 0 ingress pattern eth dst is A0:36:9F:7B:C5:A9 / vlan tpid is 0x8100 tci is 4095 / end actions queue index 10 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="A0:36:9F:7B:C5:A9")/Dot1Q(vlan=1)/IP()/TCP()/Raw('x' * 20)
+ pkt2 = Ether(dst="A0:36:9F:7B:C5:A9")/Dot1Q(vlan=4095)/IP()/UDP()/Raw('x' * 20)
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+Test case: IXGBE fdir for tunnel(vxlan and nvgre)(support by x540, x552, x550)
+==============================================================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16 --disable-rss --pkt-filter-mode=perfect-tunnel
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+vxlan::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan vni is 8 / eth dst is A0:36:9F:7B:C5:A9 / vlan tci is 2 tpid is 0x8100 / end actions queue index 1 / end
+ testpmd> flow create 0 ingress pattern eth / ipv6 / udp / vxlan vni is 9 / eth dst is A0:36:9F:7B:C5:A9 / vlan tci is 4095 tpid is 0x8100 / end actions queue index 2 / end
+
+nvgre::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre tni is 0x112244 / eth dst is A0:36:9F:7B:C5:A9 / vlan tci is 20 / end actions queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth / ipv6 / nvgre tni is 0x112233 / eth dst is A0:36:9F:7B:C5:A9 / vlan tci is 21 / end actions queue index 4 / end
+
+3. send packets
+vxlan::
+
+ pkt1=Ether(dst="A0:36:9F:7B:C5:A9")/IP()/UDP()/Vxlan(vni=8)/Ether(dst="A0:36:9F:7B:C5:A9")/Dot1Q(vlan=2)/IP()/TCP()/Raw('x' * 20)
+ pkt2=Ether(dst="A0:36:9F:7B:C5:A9")/IPv6()/UDP()/Vxlan(vni=9)/Ether(dst="A0:36:9F:7B:C5:A9")/Dot1Q(vlan=4095)/IP()/TCP()/Raw('x' * 20)
+
+nvgre::
+
+ pkt3 = Ether(dst="A0:36:9F:7B:C5:A9")/IP()/NVGRE(TNI=0x112244)/Ether(dst="A0:36:9F:7B:C5:A9")/Dot1Q(vlan=20)/IP()/TCP()/Raw('x' * 20)
+ pkt4 = Ether(dst="A0:36:9F:7B:C5:A9")/IPv6()/NVGRE(TNI=0x112233)/Ether(dst="A0:36:9F:7B:C5:A9")/Dot1Q(vlan=21)/IP()/TCP()/Raw('x' * 20)
+
+verify pkt1 to pkt4 are into queue 1 to queue 4.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+Test case: igb SYN
+==================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=8 --txq=8 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+
+1) ipv4::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / tcp flags spec 0x02 flags mask 0x02 / end actions queue index 3 / end
+
+2) ipv6::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow create 0 ingress pattern eth / ipv6 / tcp flags spec 0x02 flags mask 0x02 / end actions queue index 4 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(dport=80,flags="S")/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/TCP(dport=80,flags="S")/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(dport=80,flags="PA")/Raw('x' * 20)
+ pkt4 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/TCP(dport=80,flags="PA")/Raw('x' * 20)
+
+ipv4 verify pkt1 to queue 3, pkt2 to queue 0, pkt3 to queue 0
+ipv6 verify pkt2 to queue 4, pkt1 to queue 0, pkt4 to queue 0
+
+notes: the out packet default is Flags [S], so if the flags is omitted in
+sent pkt, the pkt will be into queue 3 or queue 4.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+Test case: igb n-tuple(82576)
+=============================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=8 --txq=8 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 proto is 17 / udp src is 22 dst is 23 / end actions queue index 1 / end
+ testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 proto is 6 / tcp src is 22 dst is 23 / end actions queue index 2 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="%s")/IP(src="192.168.0.1", dst="192.168.0.2")/UDP(sport=22,dport=23)/Raw('x' * 20)
+ pkt2 = Ether(dst="%s")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=32,dport=33)/Raw('x' * 20)
+
+verify pkt1 to queue 1, pkt2 to queue 2, pkt3 to queue 3.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+Test case: igb n-tuple(i350 or 82580)
+=====================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=8 --txq=8 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 proto is 17 / udp dst is 23 / end actions queue index 1 / end
+ testpmd> flow create 0 ingress pattern eth / ipv4 proto is 6 / tcp dst is 33 / end actions queue index 2 / end
+
+3. send packets::
+
+ pkt1 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/UDP(sport=22,dport=23)/Raw('x' * 20)
+ pkt2 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/UDP(sport=22,dport=24)/Raw('x' * 20)
+ pkt3 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=32,dport=33)/Raw('x' * 20)
+ pkt4 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=32,dport=34)/Raw('x' * 20)
+
+verify pkt1 to queue 1, pkt2 to queue 0.
+pkt3 to queue 2, pkt4 to queue 0.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
+
+Test case: igb ethertype
+========================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=8 --txq=8
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules::
+
+ testpmd> flow validate 0 ingress pattern eth type is 0x0806 / end actions queue index 3 / end
+ testpmd> flow validate 0 ingress pattern eth type is 0x86DD / end actions queue index 5 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x0806 / end actions queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x88cc / end actions queue index 4 / end
+ testpmd> flow create 0 ingress pattern eth type is 0x88cc / end actions queue index 8 / end
+
+the ixgbe don't support the 0x88DD eth type packet. so the second command
+failed. the queue id exceeds the max queue id, so the last command failed.
+
+3. send packets::
+
+ pkt1 = Ether(dst="ff:ff:ff:ff:ff:ff")/ARP(pdst="192.168.1.1")
+ pkt2 = Ether(dst="00:11:22:33:44:55", type=0x88CC)/Raw('x' * 20)
+
+verify pkt1 to queue 3, and pkt2 to queue 4.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ verify pkt1 to queue 0, and pkt2 to queue 4.
+ testpmd> flow list 0
+ testpmd> flow flush 0
+
+verify pkt1 to queue 0, and pkt2 to queue 0
+Then::
+
+ testpmd> flow list 0
+
+Test case: igb flexbytes
+========================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=8 --txq=8 --disable-rss
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create filter rules
+1) l2 packet::
+
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 14 pattern is fhds / end actions queue index 1 / end
+
+2) l2 packet relative is 1
+(the first relative must be 0, so this rule won't work)::
+
+ testpmd> flow create 0 ingress pattern raw relative is 1 offset is 2 pattern is fhds / end actions queue index 2 / end
+
+3) ipv4 packet::
+
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 34 pattern is ab / end actions queue index 3 / end
+
+4) ipv6 packet::
+
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 58 pattern is efgh / end actions queue index 4 / end
+
+5) 3 fields relative is 0::
+
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 38 pattern is ab / raw relative is 0 offset is 34 pattern is cd / raw relative is 0 offset is 42 pattern is efgh / end actions queue index 5 / end
+
+6) 4 fields relative is 0 and 1::
+
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 48 pattern is ab / raw relative is 1 offset is 0 pattern is cd / raw relative is 0 offset is 44 pattern is efgh / raw relative is 1 offset is 10 pattern is hijklmnopq / end actions queue index 6 / end
+
+7) 3 fields offset confilict::
+
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 64 pattern is ab / raw relative is 1 offset is 4 pattern is cdefgh / raw relative is 0 offset is 68 pattern is klmn / end actions queue index 7 / end
+
+8) 1 field 128bytes
+flush the rules::
+
+ testpmd> flow flush 0
+
+then create the rule::
+
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 128 pattern is ab / end actions queue index 1 / end
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 126 pattern is abcd / end actions queue index 1 / end
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 126 pattern is ab / end actions queue index 1 / end
+
+the first two rules failed to create, only the last flow rule is created successfully.
+
+9) 2 field 128bytes::
+
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 68 pattern is ab / raw relative is 1 offset is 58 pattern is cd / end actions queue index 2 / end
+ testpmd> flow create 0 ingress pattern raw relative is 0 offset is 68 pattern is ab / raw relative is 1 offset is 56 pattern is cd / end actions queue index 2 / end
+
+the first rule failed to create, only the last flow rule is created successfully.
+
+3. send packets::
+
+ pkt11 = Ether(dst="00:11:22:33:44:55")/Raw(load="fhdsab")
+ pkt12 = Ether(dst="00:11:22:33:44:55")/Raw(load="afhdsb")
+ pkt2 = Ether(dst="00:11:22:33:44:55")/Raw(load="abfhds")
+ pkt3 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/Raw(load="abcdef")
+ pkt41 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/Raw(load="xxxxefgh")
+ pkt42 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2")/TCP(sport=32,dport=33)/Raw(load="abcdefgh")
+ pkt5 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/Raw(load="cdxxabxxefghxxxx")
+ pkt6 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2", tos=4, ttl=3)/UDP(sport=32,dport=33)/Raw(load="xxefghabcdxxxxxxhijklmnopqxxxx")
+ pkt71 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=22,dport=23)/Raw(load="xxxxxxxxxxabxxklmnefgh")
+ pkt72 = Ether(dst="00:11:22:33:44:55")/IPv6(src="2001::1", dst="2001::2", tc=3, hlim=30)/Raw(load="xxxxxxxxxxabxxklmnefgh")
+ pkt73 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=22,dport=23)/Raw(load="xxxxxxxxxxabxxklcdefgh")
+ pkt81 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=22,dport=23)/Raw(load="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxab")
+ pkt82 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=22,dport=23)/Raw(load="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxcb")
+ pkt91 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=22,dport=23)/Raw(load="xxxxxxxxxxxxxxabxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxcd")
+ pkt92 = Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=22,dport=23)/Raw(load="xxxxxxxxxxxxxxabxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxce")
+
+verify pkt11 to queue 1, pkt12 to queue 0.
+pkt2 to queue 0.
+pkt3 to queue 3.
+pkt41 to queue 4, pkt42 to queue 0, // tcp header has 20 bytes.
+pkt5 to queue 5.
+pkt6 to queue 6.
+pkt71 to queue 7, pkt72 to queue 7, pkt73 to queue 0.
+pkt81 to queue 1, pkt82 to queue 0.
+pkt91 to queue 2, pkt92 to queue 0.
+
+4. verify rules can be listed and destoryed::
+
+ testpmd> flow list 0
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+ testpmd> flow flush 0
+ testpmd> flow list 0
--
2.5.0
More information about the dts
mailing list