[dts] [PATCH] tests: Add verification after flush rule to TestSuite_queue_region.py

[Peng Yuan]

Add some verification after flush rule,
Change some actions for fortpark card.
The packet not match any queue region rule will go to queue region 0.

Signed-off-by: Peng Yuan <yuan.peng at intel.com>

diff --git a/tests/TestSuite_queue_region.py b/tests/TestSuite_queue_region.py
index 9615388..2e4348a 100644
--- a/tests/TestSuite_queue_region.py
+++ b/tests/TestSuite_queue_region.py
@@ -196,20 +196,19 @@ class TestQueue_region(TestCase):
 
     def test_pctype_map_queue_region(self):
         # set queue region on a port
-        self.dut.send_expect("set port 0 queue-region region_id 0 queue_start_index 1 queue_num 1", "testpmd> ")
+        self.dut.send_expect("set port 0 queue-region region_id 0 queue_start_index 1 queue_num 2", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 1 queue_start_index 3 queue_num 2", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 2 queue_start_index 6 queue_num 2", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 3 queue_start_index 8 queue_num 2", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 4 queue_start_index 11 queue_num 4", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 5 queue_start_index 15 queue_num 1", "testpmd> ")
-        self.dut.send_expect("set port 0 queue-region region_id 6 queue_start_index 2 queue_num 1", "testpmd> ")
+        self.dut.send_expect("set port 0 queue-region region_id 6 queue_start_index 5 queue_num 1", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 7 queue_start_index 10 queue_num 1", "testpmd> ")
 
         # Set the mapping of flowtype to region index on a port
         self.dut.send_expect("set port 0 queue-region region_id 0 flowtype 31", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 1 flowtype 32", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 2 flowtype 33", "testpmd> ")
-        self.dut.send_expect("set port 0 queue-region region_id 3 flowtype 34", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 4 flowtype 35", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 6 flowtype 36", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 2 flowtype 41", "testpmd> ")
@@ -217,22 +216,16 @@ class TestQueue_region(TestCase):
         self.dut.send_expect("set port 0 queue-region region_id 4 flowtype 44", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 5 flowtype 45", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 7 flowtype 46", "testpmd> ")
-        self.dut.send_expect("set port 0 queue-region region_id 1 flowtype 63", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region flush on", "testpmd> ")
 
         # send the packets and verify the results
-        queue_region = ["1"]
+        queue_region = ["1", "2"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="udp")
 
         # fortville can't parse the TCP SYN type packet, fortpark can parse it.
-        # but you need to update hardware defined pctype to software defined
-        # flow type mapping table manully.
         if(self.nic in ["fortpark_TLV"]):
-            self.dut.send_expect("port config 0 pctype mapping update 32 1", "testpmd> ")
-            self.dut.send_expect("port config all rss 1", "testpmd> ")
             queue_region = ["3", "4"]
             self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="tcp", flags="S")
-            self.dut.send_expect("port config all rss all", "testpmd> ")
         else:
             queue_region = ["6", "7"]
             self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="tcp", flags="S")
@@ -240,17 +233,25 @@ class TestQueue_region(TestCase):
         queue_region = ["6", "7"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="tcp", flags="PA")
 
-        queue_region = ["8", "9"]
+        # not assign ipv4-sctp packet to any queue region, the packet to queue region 0.
+        queue_region = ["1", "2"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="sctp", tag=1)
 
         queue_region = ["11", "12", "13", "14"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv4")
 
-        queue_region = ["2"]
+        queue_region = ["5"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv4", frag=1)
 
-        queue_region = ["8", "9"]
-        self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6_tcp")
+        # fortville can't parse the TCP SYN type packet, fortpark can parse it.
+        # default is SYN mode.
+        # not assign ipv4-tcp SYN packet to any queue region, the packet to queue region 0.
+        if(self.nic in ["fortpark_TLV"]):
+            queue_region = ["1", "2"]
+            self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6_tcp")
+        else:
+            queue_region = ["8", "9"]
+            self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6_tcp")
 
         queue_region = ["11", "12", "13", "14"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6_sctp", tag=2)
@@ -261,7 +262,8 @@ class TestQueue_region(TestCase):
         queue_region = ["15"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6")
 
-        queue_region = ["3", "4"]
+        # not assign L2 packet to any queue region, the packet to queue region 0.
+        queue_region = ["1", "2"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="L2", ethertype=0x88bb)
 
         queue_region = ["11", "12", "13", "14"]
@@ -270,14 +272,28 @@ class TestQueue_region(TestCase):
         # clear all the queue region configuration
         # check if there is 1 flow rule have been created
         out = self.dut.send_expect("show port 0 queue-region", "testpmd> ")
-        self.get_and_compare_rules(out, 8, 12, 0)
+        self.get_and_compare_rules(out, 8, 10, 0)
         self.dut.send_expect("set port 0 queue-region flush off", "testpmd> ")
         out = self.dut.send_expect("show port 0 queue-region", "testpmd> ")
         self.get_and_compare_rules(out, 0, 0, 0)
 
+        # confirm packet not to the same queue after flush all the queue region rull.
+        self.send_packet_pctype(mac=self.pf_mac, pkt_type="udp")
+        queue = self.get_queue_number()
+        self.verify(queue not in ["1", "2"], "the queue regions have not been flushed clearly.")
+        self.send_packet_pctype(mac=self.pf_mac, pkt_type="sctp")
+        queue = self.get_queue_number()
+        self.verify(queue not in ["1", "2"], "the queue regions have not been flushed clearly.")
+        self.send_packet_pctype(mac=self.pf_mac, pkt_type="ipv4")
+        queue = self.get_queue_number()
+        self.verify(queue not in ["10", "11", "12", "13"], "the queue regions have not been flushed clearly.")
+        self.send_packet_pctype(mac=self.pf_mac, pkt_type="ipv6_tcp")
+        queue = self.get_queue_number()
+        self.verify(queue not in ["8", "9"], "the queue regions have not been flushed clearly.")
+
     def test_up_map_queue_region(self):
         # set queue region on a port
-        self.dut.send_expect("set port 0 queue-region region_id 0 queue_start_index 0 queue_num 1", "testpmd> ")
+        self.dut.send_expect("set port 0 queue-region region_id 0 queue_start_index 14 queue_num 2", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 6 queue_start_index 1 queue_num 8", "testpmd> ")
         self.dut.send_expect("set port 0 queue-region region_id 2 queue_start_index 10 queue_num 4", "testpmd> ")
 
@@ -289,10 +305,10 @@ class TestQueue_region(TestCase):
         self.dut.send_expect("set port 0 queue-region flush on", "testpmd> ")
 
         # send the packets and verify the results
-        queue_region = ["0"]
+        queue_region = ["14", "15"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="udp", prio=4)
 
-        queue_region = ["0"]
+        queue_region = ["14", "15"]
         self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="udp", prio=3)
 
         queue_region = ["1", "2", "3", "4", "5", "6", "7", "8"]
@@ -309,7 +325,7 @@ class TestQueue_region(TestCase):
 
         self.send_packet_pctype(mac=self.pf_mac, pkt_type="udp")
         queue = self.get_queue_number()
-        self.verify(queue not in ["10", "11", "12", "13"], "the packet doesn't enter the expected queue.")
+        self.verify(queue in ["14", "15"], "the packet doesn't enter the expected queue.")
 
         # clear all the queue region configuration
         out = self.dut.send_expect("show port 0 queue-region", "testpmd> ")
@@ -318,10 +334,13 @@ class TestQueue_region(TestCase):
         out = self.dut.send_expect("show port 0 queue-region", "testpmd> ")
         self.get_and_compare_rules(out, 0, 0, 0)
 
-        # confirm packet can't into the previous queue_region
+        # confirm packet not to the same queue after flush all the queue region rull.
         self.send_packet_up(mac=self.pf_mac, pkt_type="udp", prio=7)
         queue = self.get_queue_number()
         self.verify(queue not in ["10", "11", "12", "13"], "the queue regions have not been flushed clearly.")
+        self.send_packet_up(mac=self.pf_mac, pkt_type="tcp", prio=2)
+        queue = self.get_queue_number()
+        self.verify(queue not in ["10", "11", "12", "13"], "the queue regions have not been flushed clearly.")
 
     def test_boundary_values(self):
         # boundary value testing of "Set a queue region on a port"
-- 
2.7.4