[dts] [PATCH] test_plans: fix a typo in 2 VLAN test plans
Rami Rosen
ramirose at gmail.com
Sat Dec 29 13:34:46 CET 2018
This patch fixes typos in Dual Vlan test plan and in vlan ethertype config
test plan.
Signed-off-by: Rami Rosen <ramirose at gmail.com>
---
test_plans/dual_vlan_test_plan.rst | 16 ++++++++--------
test_plans/vlan_ethertype_config_test_plan.rst | 4 ++--
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/test_plans/dual_vlan_test_plan.rst b/test_plans/dual_vlan_test_plan.rst
index f828c18..3defc91 100644
--- a/test_plans/dual_vlan_test_plan.rst
+++ b/test_plans/dual_vlan_test_plan.rst
@@ -152,14 +152,14 @@ Configure the traffic generator to send VLAN packets with the Tag Identifier
``1`` and send 1 packet on port ``A``.Verify that the VLAN packet cannot been
received in port ``B``.
-Test Case: Enable/Disable VLAN header striping
+Test Case: Enable/Disable VLAN header stripping
==============================================
Enable vlan packet forwarding on port ``0`` first::
testpmd> vlan set filter off 0
-Enable vlan header striping on port ``0``::
+Enable vlan header stripping on port ``0``::
testpmd> vlan set strip on 0
@@ -184,7 +184,7 @@ Configure the traffic generator to send VLAN packets with the Tag Identifier
``1`` and send 1 packet on port ``A``. Verify that the packet without VLAN Tag
Identifier can been received in port ``B``.
-Disable vlan header striping on port ``0``::
+Disable vlan header stripping on port ``0``::
testpmd> vlan set strip off 0
@@ -209,18 +209,18 @@ Configure the traffic generator to send VLAN packets with the Tag Identifier
``1`` and send 1 packet on port ``A``. Verify that the packet with VLAN Tag
Identifier ``1`` can been received in port ``B``.
-Test Case: Enable/Disable VLAN header striping in queue
+Test Case: Enable/Disable VLAN header stripping in queue
=======================================================
Enable vlan packet forwarding on port ``0`` first::
testpmd> vlan set filter off 0
-Disable vlan header striping on port ``0``::
+Disable vlan header stripping on port ``0``::
testpmd> vlan set strip off 0
-Disable vlan header striping in queue 0 on port ``0``::
+Disable vlan header stripping in queue 0 on port ``0``::
testpmd> vlan set stripq off 0,0
@@ -229,7 +229,7 @@ Configure the traffic generator to send VLAN packets with the Tag Identifier
Identifier ``1`` can been received in port ``B``.
-Enable vlan header striping in queue 0 on port ``0``::
+Enable vlan header stripping in queue 0 on port ``0``::
testpmd> vlan set stripq on 0,0
@@ -237,7 +237,7 @@ Configure the traffic generator to send VLAN packets with the Tag Identifier
``1`` and send 1 packet on port ``A``. Verify that the packet without VLAN Tag
Identifier ``1`` can been received in port ``B``.
-Enable vlan header striping on port ``0``.
+Enable vlan header stripping on port ``0``.
MISSING COMMAND
diff --git a/test_plans/vlan_ethertype_config_test_plan.rst b/test_plans/vlan_ethertype_config_test_plan.rst
index 9315e39..81b7d9b 100644
--- a/test_plans/vlan_ethertype_config_test_plan.rst
+++ b/test_plans/vlan_ethertype_config_test_plan.rst
@@ -123,7 +123,7 @@ Test Case 3: test adding VLAN Tag Identifier with changing VLAN TPID
7. Send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``,
Verify that the VLAN packet cannot be received in port ``B``.
-Test Case 4: test VLAN header striping with changing VLAN TPID
+Test Case 4: test VLAN header stripping with changing VLAN TPID
==============================================================
1. start testpmd, setup vlan filter off, vlan strip on, start in mac forwarding mode::
@@ -144,7 +144,7 @@ Test Case 4: test VLAN header striping with changing VLAN TPID
4. Send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``.
Verify that packet received in port ``B`` without VLAN Tag Identifier
-5. Disable vlan header striping on port ``0``::
+5. Disable vlan header stripping on port ``0``::
testpmd> vlan set strip off 0
--
2.19.2
More information about the dts
mailing list