[dts] [PATCH v3] tests: Add TestSuite_runtime_queue_number.py

Liu, Yong yong.liu at intel.com
Mon Jun 25 04:10:30 CEST 2018


Thanks, Yuan. Two comments are inline.

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Peng Yuan
> Sent: Thursday, June 21, 2018 11:15 AM
> To: dts at dpdk.org
> Cc: Peng, Yuan <yuan.peng at intel.com>
> Subject: [dts] [PATCH v3] tests: Add TestSuite_runtime_queue_number.py
> 
> Add automation tests: TestSuite_runtime_queue_number.py
> 
> Signed-off-by: Peng Yuan <yuan.peng at intel.com>
> 
> diff --git a/tests/TestSuite_runtime_queue_number.py
> b/tests/TestSuite_runtime_queue_number.py
> new file mode 100644
> index 0000000..6cab9c0
> --- /dev/null
> +++ b/tests/TestSuite_runtime_queue_number.py
> @@ -0,0 +1,318 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2018 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +#   * Redistributions of source code must retain the above copyright
> +#     notice, this list of conditions and the following disclaimer.
> +#   * Redistributions in binary form must reproduce the above copyright
> +#     notice, this list of conditions and the following disclaimer in
> +#     the documentation and/or other materials provided with the
> +#     distribution.
> +#   * Neither the name of Intel Corporation nor the names of its
> +#     contributors may be used to endorse or promote products derived
> +#     from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +
> +Set the VF max queue number when running the DPDK APP instead of
> compiling.
> +
> +"""
> +
> +import utils
> +import time
> +import re
> +
> +from test_case import TestCase
> +from settings import HEADER_SIZE
> +from pmd_output import PmdOutput
> +from settings import DRIVERS
> +
> +from packet import Packet
> +
> +
> +class TestRuntime_Queue_Number(TestCase):
> +
> +    def set_up_all(self):
> +        """
> +        Run at the start of each test suite.
> +        Run time Queue Number Prerequistites
> +        """
> +        self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
> +                                 "fortville_spirit_single",
> "fortpark_TLV"], "NIC Unsupported: " + str(self.nic))
> +
> +        # Based on h/w type, choose how many ports to use
> +        self.dut_ports = self.dut.get_ports(self.nic)
> +        # Verify that enough ports are available
> +        self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
> +
> +        localPort = self.tester.get_local_port(self.dut_ports[0])
> +        self.tester_intf = self.tester.get_interface(localPort)
> +        self.tester_mac = self.tester.get_mac(localPort)
> +        self.pf_interface = self.dut.ports_info[self.dut_ports[0]]['intf']
> +        self.pf_mac = self.dut.get_mac_address(0)
> +        self.pf_pci = self.dut.ports_info[self.dut_ports[0]]['pci']
> +        self.pmdout = PmdOutput(self.dut)
> +        self.cores = "1S/4C/1T"
> +
> +        self.session_secondary = self.dut.new_session()
> +        self.session_third = self.dut.new_session()
> +        self.vf_mac = "00:11:22:33:44:55"
> +
> +    def set_up(self):
> +        """
> +        Run before each test case.
> +        """
> +        pass
> +
> +    def setup_env(self, vfs_num):
> +        """
> +        This is to set up vf environment.
> +        The pf is bound to dpdk driver.
> +        """
> +        # assigned number of VFs
> +        self.dut.generate_sriov_vfs_by_port(self.dut_ports[0], vfs_num,
> self.drivername)
> +        self.sriov_vfs_port =
> self.dut.ports_info[self.dut_ports[0]]['vfs_port']
> +
> +        try:
> +            for port in self.sriov_vfs_port:
> +                port.bind_driver(driver="vfio-pci")
> +        except Exception as e:
> +            self.destroy_env()
> +            raise Exception(e)
> +
> +    def destroy_env(self):
> +        """
> +        This is to stop testpmd and destroy vf environment.
> +        """
> +        self.session_third.send_expect("quit", "# ")
> +        time.sleep(2)
> +        self.session_secondary.send_expect("quit", "# ")
> +        time.sleep(2)
> +        self.dut.send_expect("quit", "# ")
> +        time.sleep(2)
> +        self.dut.destroy_sriov_vfs_by_port(self.dut_ports[0])
> +
> +    def verify_result(self, outstring, max_rxqn, max_txqn, cur_rxqn,
> cur_txqn):
> +        """
> +        verify the packet to the expected queue or be dropped
> +        """
> +        self.verify("Max possible RX queues: %d" % max_rxqn in outstring,
> "the vf RX max queue number is not set successfully")
> +        self.verify("Max possible TX queues: %d" % max_txqn in outstring,
> "the vf TX max queue number is not set successfully")
> +        self.verify("Current number of RX queues: %d" % cur_rxqn in
> outstring, "the vf RX queue number is not set successfully")
> +        self.verify("Current number of TX queues: %d" % cur_txqn in
> outstring, "the vf TX queue number is not set successfully")
> +
> +    def send_packet(self, itf):
> +        """
> +        Sends packets.
> +        """
> +        self.tester.scapy_foreground()
> +        time.sleep(2)
> +        for i in range(32):
> +            packet = r'sendp([Ether(dst="%s",
> src=get_if_hwaddr("%s"))/IP(src="192.168.0.%d", dst="192.168.0.%d")],
> iface="%s")' % (
> +                self.vf_mac, itf, i + 1, i + 2, itf)
> +            self.tester.scapy_append(packet)
> +            self.tester.scapy_execute()
> +            time.sleep(2)
> +
> +    def check_packet_queue(self, out):
> +        """
> +        get the queue which packet enter.
> +        """
> +        self.verify("Queue= 0" in out and "Queue= 1" in out and "Queue=
> 2" in out and "Queue= 3" in out
> +                    and "Queue= 4" in out and "Queue= 5" in out and
> "Queue= 6" in out and "Queue= 7" in out, "there is some queues doesn't
> work")
> +        lines = out.split("\r\n")
> +        reta_line = {}
> +        queue_flag = 0
> +        packet_sumnum = 0
> +        # collect the hash result and the queue id
> +        for line in lines:
> +            line = line.strip()
> +            if queue_flag == 1:
> +                result_scanner = r"RX-packets:\s?([0-9]+)"
> +                scanner = re.compile(result_scanner, re.DOTALL)
> +                m = scanner.search(line)
> +                packet_num = m.group(1)
> +                packet_sumnum = packet_sumnum + int(packet_num)
> +                queue_flag = 0
> +            elif line.strip().startswith("------- Forward"):
> +                queue_flag = 1
> +            elif line.strip().startswith("RX-packets"):
> +                result_scanner = r"RX-packets:\s?([0-9]+)"
> +                scanner = re.compile(result_scanner, re.DOTALL)
> +                m = scanner.search(line)
> +                packet_rec = m.group(1)
> +
> +        self.verify(packet_sumnum == int(packet_rec) == 32, "There are
> some packets lost.")

Look like similar function has been implemented in other suite, I recommend to implement it in pmd_ouput module. 

> +
> +    def test_set_valid_vf_max_qn(self):
> +        """
> +        try to set all the valid queue number of VF
> +        """
> +        self.setup_env(2)
> +        max_qn = (1, 2, 4, 8, 16)
> +        # set all the valid queue number per VF
> +        for i in max_qn:
> +            # start testpmd on pf
> +            self.pmdout.start_testpmd("%s" % self.cores, eal_param="-
> w %s,queue-num-per-vf=%d --file-prefix=test1 --socket-mem 1024,1024 --
> legacy-mem" % (self.pf_pci, i))

Please not use legacy-mem mode, it won't be the default option of dpdk. 

> +            # start testpmd on vf0
> +            self.session_secondary.send_expect("./%s/app/testpmd -c 0xf0
> -n 4 -w %s --file-prefix=test2 --socket-mem 1024,1024 --legacy-mem -- -i -
> -rxq=%d --txq=%d" % (self.target, self.sriov_vfs_port[0].pci, i, i),
> "testpmd>", 120)
> +            outstring = self.session_secondary.send_expect("show port
> info all", "testpmd> ", 120)
> +            self.verify_result(outstring, max_rxqn=i, max_txqn=i,
> cur_rxqn=i, cur_txqn=i)
> +            self.session_secondary.send_expect("quit", "# ")
> +            time.sleep(2)
> +            self.dut.send_expect("quit", "# ")
> +            time.sleep(2)
> +
> +    def test_set_invalid_vf_max_qn(self):
> +        """
> +        try to set several invalid queue number of VF
> +        """
> +        self.setup_env(2)
> +        max_qn = (0, 6, 17, 32)
> +        # set several invalid queue number per vf
> +        for i in max_qn:
> +            # start testpmd on pf
> +            out = self.pmdout.start_testpmd("%s" % self.cores,
> eal_param="-w %s,queue-num-per-vf=%d --file-prefix=test1 --socket-mem
> 1024,1024 --legacy-mem" % (self.pf_pci, i))
> +            self.verify("Wrong VF queue number = %d" % i in out, "the
> setting of invalid vf max queue number failed.")
> +            # start testpmd on vf0
> +            self.session_secondary.send_expect("./%s/app/testpmd -c 0xf0
> -n 4 -w %s --file-prefix=test2 --socket-mem 1024,1024 --legacy-mem -- -i" %
> (self.target, self.sriov_vfs_port[0].pci), "testpmd>", 120)
> +            outstring = self.session_secondary.send_expect("show port
> info all", "testpmd> ", 120)
> +            self.verify_result(outstring, max_rxqn=4, max_txqn=4,
> cur_rxqn=1, cur_txqn=1)
> +            self.session_secondary.send_expect("quit", "# ")
> +            time.sleep(2)
> +            self.dut.send_expect("quit", "# ")
> +            time.sleep(2)
> +
> +    def test_set_vf_qn(self):
> +        """
> +        set vf queue number with testpmd eal parameters.
> +        """
> +        self.setup_env(2)
> +        self.pmdout.start_testpmd("%s" % self.cores, eal_param="-
> w %s,queue-num-per-vf=8 --file-prefix=test1 --socket-mem 1024,1024 --
> legacy-mem" % self.pf_pci)
> +        self.session_secondary.send_expect("./%s/app/testpmd -c 0xf0 -n 4
> -w %s --file-prefix=test2 --socket-mem 1024,1024 --legacy-mem -- -i --
> rxq=9 --txq=9" % (self.target, self.sriov_vfs_port[0].pci), "# ", 120)
> +        self.session_secondary.send_expect("./%s/app/testpmd -c 0xf0 -n 4
> -w %s --file-prefix=test2 --socket-mem 1024,1024 --legacy-mem -- -i --
> rxq=3 --txq=3" % (self.target, self.sriov_vfs_port[0].pci), "testpmd>",
> 120)
> +        outstring = self.session_secondary.send_expect("show port info
> all", "testpmd> ", 120)
> +        self.verify_result(outstring, max_rxqn=8, max_txqn=8, cur_rxqn=3,
> cur_txqn=3)
> +
> +    def test_set_vf_qn_in_testpmd(self):
> +        """
> +        set vf queue number with testpmd command.
> +        """
> +        self.setup_env(2)
> +        self.pmdout.start_testpmd("%s" % self.cores, eal_param="-
> w %s,queue-num-per-vf=8 --file-prefix=test1 --socket-mem 1024,1024 --
> legacy-mem" % self.pf_pci)
> +        self.session_secondary.send_expect("./%s/app/testpmd -c 0xf0 -n 4
> -w %s --file-prefix=test2 --socket-mem 1024,1024 --legacy-mem -- -i" %
> (self.target, self.sriov_vfs_port[0].pci), "testpmd>", 120)
> +        outstring = self.session_secondary.send_expect("show port info
> all", "testpmd> ", 120)
> +        self.verify_result(outstring, max_rxqn=8, max_txqn=8, cur_rxqn=1,
> cur_txqn=1)
> +        self.session_secondary.send_expect("port stop all", "testpmd> ")
> +        self.session_secondary.send_expect("port config all rxq 8",
> "testpmd> ")
> +        self.session_secondary.send_expect("port config all txq 8",
> "testpmd> ")
> +        self.session_secondary.send_expect("port start all", "testpmd> ")
> +        outstring = self.session_secondary.send_expect("show port info
> all", "testpmd> ", 120)
> +        self.verify_result(outstring, max_rxqn=8, max_txqn=8, cur_rxqn=8,
> cur_txqn=8)
> +        self.session_secondary.send_expect("port stop all", "testpmd> ")
> +        self.session_secondary.send_expect("port config all rxq 9",
> "Fail")
> +        self.session_secondary.send_expect("port config all txq 9",
> "Fail")
> +        self.session_secondary.send_expect("port start all", "testpmd> ")
> +        outstring = self.session_secondary.send_expect("show port info
> all", "testpmd> ", 120)
> +        self.verify_result(outstring, max_rxqn=8, max_txqn=8, cur_rxqn=8,
> cur_txqn=8)
> +
> +    def test_set_32vfs_1pf(self):
> +        """
> +        set max queue number when setting 32 VFs on 1 PF port.
> +        """
> +        self.setup_env(32)
> +        # failed to set VF max queue num to 16.
> +        out = self.pmdout.start_testpmd("%s" % self.cores, eal_param="-
> w %s,queue-num-per-vf=16 --file-prefix=test1 --socket-mem 1024,1024 --
> legacy-mem" % self.pf_pci)
> +        self.verify("exceeds the hardware maximum 384" in out, "the queue
> num exceeds the hardware maximum 384")
> +        self.dut.send_expect("quit", "# ")
> +        # succeed in setting VF max queue num to 8
> +        self.pmdout.start_testpmd("%s" % self.cores, eal_param="-
> w %s,queue-num-per-vf=8 --file-prefix=test1 --socket-mem 1024,1024 --
> legacy-mem" % self.pf_pci)
> +        # start testpmd on vf0
> +        self.session_secondary.send_expect("./%s/app/testpmd -c 0xf0 -n 4
> -w %s --file-prefix=test2 --socket-mem 1024,1024 --legacy-mem -- -i --
> rxq=%d --txq=%d" % (self.target, self.sriov_vfs_port[0].pci, 8, 8),
> "testpmd>", 120)
> +        # start testpmd on vf31 with different rxq/txq number
> +        self.session_third.send_expect("./%s/app/testpmd -c 0xf00 -n 4 -
> w %s --file-prefix=test3 --socket-mem 1024,1024 --legacy-mem -- -i" %
> (self.target, self.sriov_vfs_port[31].pci), "testpmd>", 120)
> +        # check the max queue number and current queue number
> +        outstring = self.session_secondary.send_expect("show port info
> all", "testpmd> ", 120)
> +        self.verify_result(outstring, max_rxqn=8, max_txqn=8, cur_rxqn=8,
> cur_txqn=8)
> +        outstring = self.session_third.send_expect("show port info all",
> "testpmd> ", 120)
> +        self.verify_result(outstring, max_rxqn=8, max_txqn=8, cur_rxqn=1,
> cur_txqn=1)
> +        # modify the queue number of VF1 to max queue number
> +        self.session_third.send_expect("stop", "testpmd> ", 120)
> +        self.session_third.send_expect("port stop all", "testpmd> ", 120)
> +        self.session_third.send_expect("port config all rxq 8", "testpmd>
> ", 120)
> +        self.session_third.send_expect("port config all txq 8", "testpmd>
> ", 120)
> +        self.session_third.send_expect("port start all", "testpmd> ", 120)
> +
> +        # check all the queues can be used to distributed packets.
> +        self.session_secondary.send_expect("set fwd rxonly", "testpmd> ",
> 120)
> +        self.session_secondary.send_expect("set verbose 1", "testpmd> ",
> 120)
> +        self.session_secondary.send_expect("start", "testpmd> ", 120)
> +        time.sleep(2)
> +        self.send_packet(self.tester_intf)
> +        out = self.session_secondary.send_expect("stop", "testpmd> ", 120)
> +        time.sleep(2)
> +        self.check_packet_queue(out)
> +
> +        # check all the queues can be used to distributed packets.
> +        self.session_third.send_expect("set fwd rxonly", "testpmd> ", 120)
> +        self.session_third.send_expect("set verbose 1", "testpmd> ", 120)
> +        self.session_third.send_expect("start", "testpmd> ", 120)
> +        time.sleep(2)
> +        self.send_packet(self.tester_intf)
> +        out = self.session_third.send_expect("stop", "testpmd> ", 120)
> +        time.sleep(2)
> +        self.check_packet_queue(out)
> +
> +    def test_vf_bound_to_kerneldriver(self):
> +        """
> +        set vf queue number when vf bound to kernel driver.
> +        """
> +        self.setup_env(2)
> +        # bind vf to kernel driver
> +        for port in self.sriov_vfs_port:
> +            port.bind_driver(driver="i40evf")
> +        # set vf max queue number to 8
> +        self.pmdout.start_testpmd("%s" % self.cores, eal_param="-
> w %s,queue-num-per-vf=8 --file-prefix=test1 --socket-mem 1024,1024 --
> legacy-mem" % self.pf_pci)
> +        # get the vf interface
> +        for port in self.sriov_vfs_port:
> +            vf_intf = port.get_interface_name()
> +        # list all the vf rx/tx queues of one of the vfs
> +        outstring = self.session_secondary.send_expect("ethtool -S %s" %
> vf_intf, "# ", 120)
> +        self.verify("rx-7.packets" in outstring, "the vf RX max queue
> number is not set successfully")
> +        self.verify("tx-7.packets" in outstring, "the vf TX max queue
> number is not set successfully")
> +        self.dut.send_expect("quit", "# ")
> +        for port in self.sriov_vfs_port:
> +            port.bind_driver(driver="vfio-pci")
> +
> +    def tear_down(self):
> +        """
> +        Run after each test case.
> +        """
> +        self.destroy_env()
> +        self.dut.kill_all()
> +
> +    def tear_down_all(self):
> +        """
> +        Run after each test suite.
> +        """
> +        self.dut.kill_all()
> +        self.dut.close_session(self.session_secondary)
> +        self.dut.close_session(self.session_third)
> --
> 2.7.4



More information about the dts mailing list