[dts] [PATCH V1] Add test plan about vhost qemu mtu

[Liu, Yong]

Lihong,
Some comments are inline.

Thanks
Marvin

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of lihong
> Sent: Wednesday, April 29, 2020 12:35 AM
> To: dts at dpdk.org
> Cc: Ma, LihongX <lihongx.ma at intel.com>
> Subject: [dts] [PATCH V1] Add test plan about vhost qemu mtu
> 
> Signed-off-by: lihong <lihongx.ma at intel.com>
> ---
>  test_plans/vhost_qemu_mtu_test_plan.rst | 82
> +++++++++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
>  create mode 100644 test_plans/vhost_qemu_mtu_test_plan.rst
> 
> diff --git a/test_plans/vhost_qemu_mtu_test_plan.rst
> b/test_plans/vhost_qemu_mtu_test_plan.rst
> new file mode 100644
> index 0000000..3c9c0ab
> --- /dev/null
> +++ b/test_plans/vhost_qemu_mtu_test_plan.rst
> @@ -0,0 +1,82 @@
> +.. Copyright (c) <2018>, Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +===================
> +Vhost TSO Test Plan
> +===================
> +
> +The feature test the setting of MTU value of virtio-net and kernel driver.
> +
> +Prerequisites:
> +==============
> +
> +The guests kernel should grand than 4.10
> +The qemu version should greater or equal to 2.9
> +
> +Test Case: Test kernel driver in guests
> +=======================================
> +1. Launch the tetspmd by below commands on host::
> +
> +    ./testpmd -c 0xc -n 4 --socket-mem 2048,2048 \
> +    --vdev 'net_vhost0,iface=vhost-net,queues=1' \
> +    -- -i --txd=512 --rxd=128 --nb-cores=1 --port-topology=chained
> +
> +2. Launch VM::
> +
> +    Use the qemu_2.9 or qemu 2.10 to start the VM and the VM kernel
> should
> +    grand than 4.10, set the mtu value to 8888

Please use reasonable MTU setting, like 68, 1500, 9000. 

> +
> +    taskset -c 4,5 qemu-system-x86_64  -name vm0 -enable-kvm \
> +    -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
> +    -device virtio-serial -device
> virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
> +    -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \
> +    -chardev socket,id=char0,path=./vhost-net -netdev type=vhost-
> user,id=netdev0,chardev=char0,vhostforce \
> +    -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,host_mtu=8888 \
> +    -cpu host -smp 4 -m 2048 -object memory-backend-
> file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
> +    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu-
> ker-410.img -vnc :4
> +
> +3. Check the MTU value in VM::
> +
> +    Use the ifconfig command to check the MTU value of
> +    virtio kernel driver is 8888 in VM.
> +
> +Test Case: Test the virtio-net MTU
> +==================================


Please change case name format, use name like "MTU in pmd" and "MTU in virtio-net". 
Here I only saw basic output check, I think still need function test here. 

> +
> +1. Continue use the VM in Test Case1, bind the kernel driver to igb_uio::
> +
> +2. Launch testpmd in VM::
> +
> +    ./testpmd -c 0x03 -n 3 \
> +    -- -i --txd=512 --rxd=128 --tx-offloads=0x0 --enable-hw-vlan-strip
> +
> +3. Run `show port info 0` in VM, and check the MTU value is equal to 8888
> --
> 2.7.4