[dts] [PATCH 01/17] framwork/packet: Add sniff_packet specify running

[Phil Yang]

Ok, Thanks.

Thanks,
Phil Yang

> -----Original Message-----
> From: Liu, Yong <yong.liu at intel.com>
> Sent: Thursday, March 29, 2018 10:31 AM
> To: Phil Yang <Phil.Yang at arm.com>; dts at dpdk.org
> Cc: nd <nd at arm.com>; Herbert Guan <Herbert.Guan at arm.com>
> Subject: RE: [PATCH 01/17] framwork/packet: Add sniff_packet specify running
> 
> Phil,
> Please go on, I think this change won't affect most of suites.
> Please also keep packet module still workable with directly call. Some of our
> internal tools are using it for sniffing packets.
> 
> Regards,
> Marvin
> 
> > -----Original Message-----
> > From: Phil Yang [mailto:Phil.Yang at arm.com]
> > Sent: Wednesday, March 28, 2018 2:34 PM
> > To: Liu, Yong <yong.liu at intel.com>; dts at dpdk.org
> > Cc: nd <nd at arm.com>; Herbert Guan <Herbert.Guan at arm.com>
> > Subject: RE: [PATCH 01/17] framwork/packet: Add sniff_packet specify
> > running
> >
> > Hi Marvin,
> >
> > > -----Original Message-----
> > > From: Liu, Yong <yong.liu at intel.com>
> > > Sent: Wednesday, March 28, 2018 10:41 AM
> > > To: Phil Yang <Phil.Yang at arm.com>; dts at dpdk.org
> > > Cc: nd <nd at arm.com>; Herbert Guan <Herbert.Guan at arm.com>
> > > Subject: RE: [PATCH 01/17] framwork/packet: Add sniff_packet specify
> > running
> > >
> > > Hi Phil,
> > > In previous design, DTS will be run on tester for simple design and
> > stability.
> > > In our site, I can't see the benefit of change the design. Could you
> > please explain
> > > why you change it?
> > > Anyway we can change the design, but I think it will need some kind
> > > of
> > diagnosis
> > > about the impact.
> > > There may be some other staff depend on the assumption that DTS is
> > > on
> > the
> > > tester machine.
> >
> >
> > We are trying to use one machine as the controller to run DTS. The
> > controller communicate with testers which listed in the crbs.cfg by
> > SSH connection.
> > So the DTS will not running on tester.
> >
> > Since testers are connected with DUTs port by port, so I think
> > introduce controller into the DTS is more flexible to manager
> > machines. If other staff depend on the assumption that DTS is no the
> > tester machine, sniff_packet process will also connect to the tester by SSH
> connection.
> > Just one more SSH connection.
> > However, we cannot make sure the DTS is always running on the tester.
> >
> >
> > >
> > > Just for this patch. In load function, DTS machine should transmit
> > tester's pcap
> > > file first and then analyze packets.
> >
> > You are correct. Thanks to point out.
> >
> > If my proposal is acceptable, I will resend the version 2 to add the
> > transmit process.
> >
> > Thanks.
> >
> > >
> > > Regards,
> > > Marvin
> > >
> > > > -----Original Message-----
> > > > From: Phil Yang [mailto:phil.yang at arm.com]
> > > > Sent: Friday, March 23, 2018 4:04 PM
> > > > To: dts at dpdk.org
> > > > Cc: nd at arm.com; phil.yang at arm.com; Liu, Yong <yong.liu at intel.com>;
> > > > herbert.guan at arm.com
> > > > Subject: [PATCH 01/17] framwork/packet: Add sniff_packet specify
> > > > running
> > > >
> > > > If tester in crb file was not the machine which running dts, the
> > > > sniff_packet process will not running on tester.
> > > >
> > > > Create a ssh connection to the tester and run tcpdump to make sure
> > > > sniff_packet process running on the machine we expected.
> > > >
> > > > Signed-off-by: Phil Yang <phil.yang at arm.com>
> > > > ---
> > > >  framework/packet.py | 34 ++++++++++++++++++++++++++++------
> > > >  framework/tester.py | 34 ++++++++++++++++++++++++++++++++++
> > > >  2 files changed, 62 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/framework/packet.py b/framework/packet.py index
> > > > 976b82b..484e511 100755
> > > > --- a/framework/packet.py
> > > > +++ b/framework/packet.py
> > > > @@ -812,15 +812,30 @@ def get_filter_cmd(filters=[]):
> > > >          return ""
> > > >
> > > >
> > > > -def sniff_packets(intf, count=0, timeout=5, filters=[]):
> > > > +def sniff_packets(intf, count=0, timeout=5, filters=[], target=[]):
> > > >      """
> > > >      sniff all packets for certain port in certain seconds
> > > >      """
> > > >      param = ""
> > > >      direct_param = r"(\s+)\[ (\S+) in\|out\|inout \]"
> > > > -    tcpdump_help = subprocess.check_output("tcpdump -h; echo 0",
> > > > -                                           stderr=subprocess.STDOUT,
> > > > -                                           shell=True)
> > > > +
> > > > +    # target[] contain the remote machine info for ssh connection
> > > > +    # target[0]: username
> > > > +    # target[1]: ip address
> > > > +    # target[2]: pass word
> > > > +    if target:
> > > > +        tcpdump_help_pipe = subprocess.Popen(["ssh",
> > > > +                            "%s@%s" % (target[0], target[1]),
> > > > +                            "tcpdump -h"],
> > > > +                            stderr=subprocess.PIPE,
> > > > +                            stdout=subprocess.PIPE,
> > > > +                            shell=False)
> > > > +        tcpdump_help = "".join(tuple(tcpdump_help_pipe.communicate()))
> > > > +        tcpdump_help_pipe.wait()
> > > > +    else:
> > > > +        tcpdump_help = subprocess.check_output("tcpdump -h; echo 0",
> > > > +                                    stderr=subprocess.STDOUT,
> > > > + shell=True)
> > > > +
> > > >      for line in tcpdump_help.split('\n'):
> > > >          m = re.match(direct_param, line)
> > > >          if m:
> > > > @@ -850,9 +865,16 @@ def sniff_packets(intf, count=0, timeout=5,
> > > > filters=[]):
> > > >      else:
> > > >          cmd = sniff_cmd % options
> > > >
> > > > -    args = shlex.split(cmd)
> > > > +    if target:
> > > > +        pipe = subprocess.Popen(["ssh",
> > > > +                "%s@%s" % (target[0], target[1]),
> > > > +                cmd],
> > > > +                stdin=subprocess.PIPE,
> > > > +                shell=False)
> > > > +    else:
> > > > +        args = shlex.split(cmd)
> > > > +        pipe = subprocess.Popen(args)
> > > >
> > > > -    pipe = subprocess.Popen(args)
> > > >      index = str(time.time())
> > > >      SNIFF_PIDS[index] = (pipe, intf, timeout)
> > > >      time.sleep(1)
> > > > diff --git a/framework/tester.py b/framework/tester.py index
> > > > a775f68..49749de 100755
> > > > --- a/framework/tester.py
> > > > +++ b/framework/tester.py
> > > > @@ -704,6 +704,40 @@ class Tester(Crb):
> > > >              self.proc.kill()
> > > >              self.proc = None
> > > >
> > > > +    def tcpdump_sniff_packets(self, intf, count=0, timeout=5,
> > filters=[]):
> > > > +        """
> > > > +        Wrapper for packet module sniff_packets
> > > > +        """
> > > > +        # load functions in packet module
> > > > +        module = __import__("packet")
> > > > +        sniff_f = getattr(module, "sniff_packets")
> > > > +
> > > > +        target=[]
> > > > +        target.append(self.get_username())
> > > > +        target.append(self.get_ip_address())
> > > > +        target.append(self.get_password())
> > > > +        return sniff_f(intf, count, timeout, filters, target)
> > > > +
> > > > +    def load_tcpdump_sniff_pcap(self, index=''):
> > > > +        """
> > > > +        Wrapper for packet module load_sniff_pcap
> > > > +        """
> > > > +        # load functions in packet module
> > > > +        module = __import__("packet")
> > > > +        load_pcap_f = getattr(module, "load_sniff_pcap")
> > > > +
> > > > +        return load_pcap_f(index)
> > > > +
> > > > +    def load_tcpdump_sniff_packets(self, index=''):
> > > > +        """
> > > > +        Wrapper for packet module load_sniff_packets
> > > > +        """
> > > > +        # load functions in packet module
> > > > +        module = __import__("packet")
> > > > +        load_f = getattr(module, "load_sniff_packets")
> > > > +
> > > > +        return load_f(index)
> > > > +
> > > >      def kill_all(self, killall=False):
> > > >          """
> > > >          Kill all scapy process or DPDK application on tester.
> > > > --
> > > > 2.7.4