[dts] [PATCH V1 2/2] test_plans/vf pacfilter: add dpdk pf test scenorio

[zhao,meijuan]

add dpdk pf test scenorio

Signed-off-by: zhao,meijuan <meijuanx.zhao at intel.com>
---
 test_plans/vf_macfilter_test_plan.rst | 190 ++++++++++++++++++++++++--
 1 file changed, 182 insertions(+), 8 deletions(-)

diff --git a/test_plans/vf_macfilter_test_plan.rst b/test_plans/vf_macfilter_test_plan.rst
index 221c05e..715c66d 100644
--- a/test_plans/vf_macfilter_test_plan.rst
+++ b/test_plans/vf_macfilter_test_plan.rst
@@ -39,7 +39,7 @@ Test Case 1: test_kernel_2pf_2vf_1vm_iplink_macfilter
 
 1. Get the pci device id of DUT, for example::
 
-      ./dpdk_nic_bind.py --st
+      ./usertools/dpdk-devbind.py -s
 
       0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
       0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
@@ -49,7 +49,7 @@ Test Case 1: test_kernel_2pf_2vf_1vm_iplink_macfilter
       echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_numvfs
       echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/sriov_numvfs
 
-      ./dpdk_nic_bind.py --st
+      ./usertools/dpdk-devbind.py -s
       0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
       0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
       0000:81:02.0 'XL710/X710 Virtual Function' unused=
@@ -76,7 +76,7 @@ Test Case 1: test_kernel_2pf_2vf_1vm_iplink_macfilter
       virsh nodedev-detach pci_0000_81_02_0;
       virsh nodedev-detach pci_0000_81_0a_0;
 
-      ./dpdk_nic_bind.py --st
+      ./usertools/dpdk-devbind.py -s
 
       0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
       0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
@@ -96,7 +96,7 @@ Test Case 1: test_kernel_2pf_2vf_1vm_iplink_macfilter
    bind them to igb_uio driver, and then start testpmd, enable CRC strip,
    disable promisc mode,set it in mac forward mode::
 
-      ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
+      ./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
       ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0 -w 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
 
       testpmd> port stop all
@@ -119,7 +119,7 @@ Test Case 2: test_kernel_2pf_2vf_1vm_mac_add_filter
 
 1. Get the pci device id of DUT, for example::
 
-      ./dpdk_nic_bind.py --st
+      ./usertools/dpdk-devbind.py -s
 
       0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
       0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
@@ -129,7 +129,7 @@ Test Case 2: test_kernel_2pf_2vf_1vm_mac_add_filter
       echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_numvfs
       echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/sriov_numvfs
 
-      ./dpdk_nic_bind.py --st
+      ./usertools/dpdk-devbind.py -s
       0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
       0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
       0000:81:02.0 'XL710/X710 Virtual Function' unused=
@@ -154,7 +154,7 @@ Test Case 2: test_kernel_2pf_2vf_1vm_mac_add_filter
       virsh nodedev-detach pci_0000_81_02_0;
       virsh nodedev-detach pci_0000_81_0a_0;
 
-      ./dpdk_nic_bind.py --st
+      ./usertools/dpdk-devbind.py -s
 
       0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
       0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
@@ -174,7 +174,7 @@ Test Case 2: test_kernel_2pf_2vf_1vm_mac_add_filter
    bind them to igb_uio driver, and then start testpmd, enable CRC strip on
    VF, disable promisc mode, add a new MAC to VF0 and then start::
 
-      ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
+      ./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
       ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0 -w 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
 
       testpmd> port stop all
@@ -199,3 +199,177 @@ Test Case 2: test_kernel_2pf_2vf_1vm_mac_add_filter
 8. Use scapy to send 100 random packets with a wrong MAC to VF0, verify the
    packets can't be received by one VF and can be forward to another VF
    correctly.
+
+Test Case 3: test_dpdk_2pf_2vf_1vm_mac_add_filter
+===================================================
+
+1. Get the pci device id of DUT, bind them to igb_uio,for example::
+
+      ./usertools/dpdk-devbind.py -s
+
+      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
+      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
+      ./usertools/dpdk-devbind.py --bind=igb_uio 0000:81:00.0 0000:81:00.1
+      
+
+2. Create 2 VFs from 2 PFs, and don't set the VF MAC address at PF0::
+
+      echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/max_vfs
+      echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/max_vfs
+
+      ./usertools/dpdk-devbind.py -s
+      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+'  drv=igb_uio unused=i40e
+      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+'  drv=igb_uio unused=i40e
+      0000:81:02.0 'XL710/X710 Virtual Function' unused=
+      0000:81:0a.0 'XL710/X710 Virtual Function' unused=
+
+3. Start testpmd::
+
+      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4 -b 0000:81:02.0 -b 0000:81:0a.0 -- -i
+
+4. Detach VFs from the host, bind them to pci-stub driver::
+
+      /sbin/modprobe pci-stub
+
+      using `lspci -nn|grep -i ethernet` to get VF device id, for example "8086 154c",
+
+      echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
+      echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
+      echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
+
+      echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
+      echo 0000:81:0a.0 > /sys/bus/pci/devices/0000:08:0a.0/driver/unbind
+      echo 0000:81:0a.0 > /sys/bus/pci/drivers/pci-stub/bind
+
+   or using the following more easy way::
+
+      virsh nodedev-detach pci_0000_81_02_0;
+      virsh nodedev-detach pci_0000_81_0a_0;
+
+      ./dpdk_nic_bind.py --st
+
+      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
+      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
+      0000:81:02.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
+      0000:81:0a.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
+
+   it can be seen that VFs 81:02.0 & 81:0a.0 's driver is pci-stub.
+5. Passthrough VFs 81:02.0 & 81:0a.0 to vm0, and start vm0::
+
+      /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
+      -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
+      -device pci-assign,host=81:02.0,id=pt_0 \
+      -device pci-assign,host=81:0a.0,id=pt_1
+
+6. login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0,
+   bind them to igb_uio driver, and then start testpmd, enable CRC strip on
+   VF, disable promisc mode, add a new MAC to VF0 and then start::
+
+      ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
+      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0 -w 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
+
+      testpmd> port stop all
+      testpmd> port config all crc-strip on
+      testpmd> port start all
+      testpmd> set promisc all off
+      testpmd> mac_addr add 0 00:11:22:33:44:55
+      testpmd> set fwd mac
+      testpmd> start
+
+   Note: In Jan, 2016, i40e doesn't support mac_addr add operation, so the
+   case will be failed for FVL/Fort park NICs.
+
+7. Use scapy to send 100 random packets with current VF0's MAC, verify the
+   packets can be received by one VF and can be forward to another VF
+   correctly.
+
+8. Use scapy to send 100 random packets with new added VF0's MAC, verify the
+   packets can be received by one VF and can be forward to another VF
+   correctly.
+
+9. Use scapy to send 100 random packets with a wrong MAC to VF0, verify the
+   packets can't be received by one VF and can be forward to another VF
+   correctly.
+Test Case 4: test_dpdk_2pf_2vf_1vm_iplink_macfilter
+===================================================
+
+1. Get the pci device id of DUT, bind them to igb_uio,for example::
+
+      ./usertools/dpdk-devbind.py -s
+
+      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
+      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
+      ./usertools/dpdk-devbind.py --bind=igb_uio 0000:81:00.0 0000:81:00.1
+
+
+2. Create 2 VFs from 2 PFs, and set the VF MAC address at PF0::
+
+      echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/max_vfs
+      echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/max_vfs
+
+      ./usertools/dpdk-devbind.py -s
+      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+'  drv=igb_uio unused=i40e
+      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+'  drv=igb_uio unused=i40e
+      0000:81:02.0 'XL710/X710 Virtual Function' unused=
+      0000:81:0a.0 'XL710/X710 Virtual Function' unused=
+
+3. Start testpmd::
+
+      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4 -b 0000:81:02.0 -b 0000:81:0a.0 -- -i
+      testpmd>set vf mac addr 0 0 00:11:22:33:44:55
+
+4. Detach VFs from the host, bind them to pci-stub driver::
+
+      /sbin/modprobe pci-stub
+
+      using `lspci -nn|grep -i ethernet` to get VF device id, for example "8086 154c",
+
+      echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
+      echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
+      echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
+
+      echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
+      echo 0000:81:0a.0 > /sys/bus/pci/devices/0000:08:0a.0/driver/unbind
+      echo 0000:81:0a.0 > /sys/bus/pci/drivers/pci-stub/bind
+
+   or using the following more easy way::
+
+      virsh nodedev-detach pci_0000_81_02_0;
+      virsh nodedev-detach pci_0000_81_0a_0;
+
+      ./dpdk_nic_bind.py --st
+
+      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
+      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
+      0000:81:02.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
+      0000:81:0a.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
+
+   it can be seen that VFs 81:02.0 & 81:0a.0 's driver is pci-stub.
+5. Passthrough VFs 81:02.0 & 81:0a.0 to vm0, and start vm0::
+
+      /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
+      -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
+      -device pci-assign,host=81:02.0,id=pt_0 \
+      -device pci-assign,host=81:0a.0,id=pt_1
+
+6. Login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0,
+   bind them to igb_uio driver, and then start testpmd, enable CRC strip,
+   disable promisc mode,set it in mac forward mode::
+
+      ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
+      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0 -w 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
+
+      testpmd> port stop all
+      testpmd> port config all crc-strip on
+      testpmd> port start all
+      testpmd> set promisc all off
+      testpmd> set fwd mac
+      testpmd> start
+
+7. Use scapy to send 100 random packets with ip link set MAC to VF, verify the
+   packets can be received by one VF and can be forward to another VF
+   correctly.
+
+8. Also use scapy to send 100 random packets with a wrong MAC to VF, verify
+   the packets can't be received by one VF and can be forward to another VF
+   correctly.
-- 
2.17.2