[dts] [PATCH V2 2/2] test_plans/vf macfilter: add dpdk pf test scenorio

Tu, Lijuan lijuan.tu at intel.com
Wed Nov 28 09:28:56 CET 2018
Previous message: [dts] [PATCH V2 2/2] test_plans/vf macfilter: add dpdk pf test scenorio
Next message: [dts] [PATCH V2 1/2] tests/vf macfilter: add dpdk pf test scenorio
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of zhao,meijuan
> Sent: Wednesday, November 28, 2018 3:01 PM
> To: dts at dpdk.org
> Cc: Zhao, MeijuanX <meijuanx.zhao at intel.com>
> Subject: [dts] [PATCH V2 2/2] test_plans/vf macfilter: add dpdk pf test
> scenorio
> 
> Signed-off-by: zhao,meijuan <meijuanx.zhao at intel.com>
> ---
>  test_plans/vf_macfilter_test_plan.rst | 190 ++++++++++++++++++++++++--
>  1 file changed, 182 insertions(+), 8 deletions(-)
> 
> diff --git a/test_plans/vf_macfilter_test_plan.rst
> b/test_plans/vf_macfilter_test_plan.rst
> index 221c05e..715c66d 100644
> --- a/test_plans/vf_macfilter_test_plan.rst
> +++ b/test_plans/vf_macfilter_test_plan.rst
> @@ -39,7 +39,7 @@ Test Case 1: test_kernel_2pf_2vf_1vm_iplink_macfilter
> 
>  1. Get the pci device id of DUT, for example::
> 
> -      ./dpdk_nic_bind.py --st
> +      ./usertools/dpdk-devbind.py -s
> 
>        0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
>        0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused= @@ -49,7 +49,7 @@ Test Case 1:
> test_kernel_2pf_2vf_1vm_iplink_macfilter
>        echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_numvfs
>        echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/sriov_numvfs
> 
> -      ./dpdk_nic_bind.py --st
> +      ./usertools/dpdk-devbind.py -s
>        0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
>        0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused=
>        0000:81:02.0 'XL710/X710 Virtual Function' unused= @@ -76,7
> +76,7 @@ Test Case 1: test_kernel_2pf_2vf_1vm_iplink_macfilter
>        virsh nodedev-detach pci_0000_81_02_0;
>        virsh nodedev-detach pci_0000_81_0a_0;
> 
> -      ./dpdk_nic_bind.py --st
> +      ./usertools/dpdk-devbind.py -s
> 
>        0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
>        0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused= @@ -96,7 +96,7 @@ Test Case 1:
> test_kernel_2pf_2vf_1vm_iplink_macfilter
>     bind them to igb_uio driver, and then start testpmd, enable CRC strip,
>     disable promisc mode,set it in mac forward mode::
> 
> -      ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
> +      ./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
>        ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0
> -w 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
> 
>        testpmd> port stop all
> @@ -119,7 +119,7 @@ Test Case 2:
> test_kernel_2pf_2vf_1vm_mac_add_filter
> 
>  1. Get the pci device id of DUT, for example::
> 
> -      ./dpdk_nic_bind.py --st
> +      ./usertools/dpdk-devbind.py -s
> 
>        0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
>        0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused= @@ -129,7 +129,7 @@ Test Case 2:
> test_kernel_2pf_2vf_1vm_mac_add_filter
>        echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_numvfs
>        echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/sriov_numvfs
> 
> -      ./dpdk_nic_bind.py --st
> +      ./usertools/dpdk-devbind.py -s
>        0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
>        0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused=
>        0000:81:02.0 'XL710/X710 Virtual Function' unused= @@ -154,7
> +154,7 @@ Test Case 2: test_kernel_2pf_2vf_1vm_mac_add_filter
>        virsh nodedev-detach pci_0000_81_02_0;
>        virsh nodedev-detach pci_0000_81_0a_0;
> 
> -      ./dpdk_nic_bind.py --st
> +      ./usertools/dpdk-devbind.py -s
> 
>        0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
>        0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused= @@ -174,7 +174,7 @@ Test Case 2:
> test_kernel_2pf_2vf_1vm_mac_add_filter
>     bind them to igb_uio driver, and then start testpmd, enable CRC strip on
>     VF, disable promisc mode, add a new MAC to VF0 and then start::
> 
> -      ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
> +      ./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
>        ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0
> -w 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
> 
>        testpmd> port stop all
> @@ -199,3 +199,177 @@ Test Case 2:
> test_kernel_2pf_2vf_1vm_mac_add_filter
>  8. Use scapy to send 100 random packets with a wrong MAC to VF0, verify
> the
>     packets can't be received by one VF and can be forward to another VF
>     correctly.
> +
> +Test Case 3: test_dpdk_2pf_2vf_1vm_mac_add_filter
> +===================================================
> +
> +1. Get the pci device id of DUT, bind them to igb_uio,for example::
> +
> +      ./usertools/dpdk-devbind.py -s
> +
> +      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
> +      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused=
> +      ./usertools/dpdk-devbind.py --bind=igb_uio 0000:81:00.0
> + 0000:81:00.1
> +
> +
> +2. Create 2 VFs from 2 PFs, and don't set the VF MAC address at PF0::
> +
> +      echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/max_vfs
> +      echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/max_vfs
> +
> +      ./usertools/dpdk-devbind.py -s
> +      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+'
> drv=igb_uio unused=i40e
> +      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+'
> drv=igb_uio unused=i40e
> +      0000:81:02.0 'XL710/X710 Virtual Function' unused=
> +      0000:81:0a.0 'XL710/X710 Virtual Function' unused=
> +
> +3. Start testpmd::
> +
> +      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4 -b
> + 0000:81:02.0 -b 0000:81:0a.0 -- -i
> +
> +4. Detach VFs from the host, bind them to pci-stub driver::
> +
> +      /sbin/modprobe pci-stub
> +
> +      using `lspci -nn|grep -i ethernet` to get VF device id, for
> + example "8086 154c",
> +
> +      echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
> +      echo 0000:81:02.0 >
> /sys/bus/pci/devices/0000:08:02.0/driver/unbind
> +      echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
> +
> +      echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
> +      echo 0000:81:0a.0 >
> /sys/bus/pci/devices/0000:08:0a.0/driver/unbind
> +      echo 0000:81:0a.0 > /sys/bus/pci/drivers/pci-stub/bind
> +
> +   or using the following more easy way::
> +
> +      virsh nodedev-detach pci_0000_81_02_0;
> +      virsh nodedev-detach pci_0000_81_0a_0;
> +
> +      ./dpdk_nic_bind.py --st
> +
> +      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
> +      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused=
> +      0000:81:02.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
> +      0000:81:0a.0 'XL710/X710 Virtual Function' if= drv=pci-stub
> + unused=
> +
> +   it can be seen that VFs 81:02.0 & 81:0a.0 's driver is pci-stub.
> +5. Passthrough VFs 81:02.0 & 81:0a.0 to vm0, and start vm0::
> +
> +      /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
> +      -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img
> -vnc :1 \
> +      -device pci-assign,host=81:02.0,id=pt_0 \
> +      -device pci-assign,host=81:0a.0,id=pt_1
> +
> +6. login vm0, got VFs pci device id in vm0, assume they are 00:06.0 &
> 00:07.0,
> +   bind them to igb_uio driver, and then start testpmd, enable CRC strip on
> +   VF, disable promisc mode, add a new MAC to VF0 and then start::
> +
> +      ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
> +      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0
> + -w 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
> +
> +      testpmd> port stop all
> +      testpmd> port config all crc-strip on
> +      testpmd> port start all
> +      testpmd> set promisc all off
> +      testpmd> mac_addr add 0 00:11:22:33:44:55
> +      testpmd> set fwd mac
> +      testpmd> start
> +
> +   Note: In Jan, 2016, i40e doesn't support mac_addr add operation, so
> the
> +   case will be failed for FVL/Fort park NICs.
> +
> +7. Use scapy to send 100 random packets with current VF0's MAC, verify
> the
> +   packets can be received by one VF and can be forward to another VF
> +   correctly.
> +
> +8. Use scapy to send 100 random packets with new added VF0's MAC, verify
> the
> +   packets can be received by one VF and can be forward to another VF
> +   correctly.
> +
> +9. Use scapy to send 100 random packets with a wrong MAC to VF0, verify
> the
> +   packets can't be received by one VF and can be forward to another VF
> +   correctly.
> +Test Case 4: test_dpdk_2pf_2vf_1vm_iplink_macfilter
> +===================================================
> +
> +1. Get the pci device id of DUT, bind them to igb_uio,for example::
> +
> +      ./usertools/dpdk-devbind.py -s
> +
> +      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
> +      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused=
> +      ./usertools/dpdk-devbind.py --bind=igb_uio 0000:81:00.0
> + 0000:81:00.1
> +
> +
> +2. Create 2 VFs from 2 PFs, and set the VF MAC address at PF0::
> +
> +      echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/max_vfs
> +      echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/max_vfs
> +
> +      ./usertools/dpdk-devbind.py -s
> +      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+'
> drv=igb_uio unused=i40e
> +      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+'
> drv=igb_uio unused=i40e
> +      0000:81:02.0 'XL710/X710 Virtual Function' unused=
> +      0000:81:0a.0 'XL710/X710 Virtual Function' unused=
> +
> +3. Start testpmd::
> +
> +      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4 -b
> 0000:81:02.0 -b 0000:81:0a.0 -- -i
> +      testpmd>set vf mac addr 0 0 00:11:22:33:44:55
> +
> +4. Detach VFs from the host, bind them to pci-stub driver::
> +
> +      /sbin/modprobe pci-stub
> +
> +      using `lspci -nn|grep -i ethernet` to get VF device id, for
> + example "8086 154c",
> +
> +      echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
> +      echo 0000:81:02.0 >
> /sys/bus/pci/devices/0000:08:02.0/driver/unbind
> +      echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
> +
> +      echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
> +      echo 0000:81:0a.0 >
> /sys/bus/pci/devices/0000:08:0a.0/driver/unbind
> +      echo 0000:81:0a.0 > /sys/bus/pci/drivers/pci-stub/bind
> +
> +   or using the following more easy way::
> +
> +      virsh nodedev-detach pci_0000_81_02_0;
> +      virsh nodedev-detach pci_0000_81_0a_0;
> +
> +      ./dpdk_nic_bind.py --st
> +
> +      0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0
> drv=i40e unused=
> +      0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1
> drv=i40e unused=
> +      0000:81:02.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
> +      0000:81:0a.0 'XL710/X710 Virtual Function' if= drv=pci-stub
> + unused=
> +
> +   it can be seen that VFs 81:02.0 & 81:0a.0 's driver is pci-stub.
> +5. Passthrough VFs 81:02.0 & 81:0a.0 to vm0, and start vm0::
> +
> +      /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
> +      -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img
> -vnc :1 \
> +      -device pci-assign,host=81:02.0,id=pt_0 \
> +      -device pci-assign,host=81:0a.0,id=pt_1
> +
> +6. Login vm0, got VFs pci device id in vm0, assume they are 00:06.0 &
> 00:07.0,
> +   bind them to igb_uio driver, and then start testpmd, enable CRC strip,
> +   disable promisc mode,set it in mac forward mode::
> +
> +      ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
> +      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0
> + -w 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
> +
> +      testpmd> port stop all
> +      testpmd> port config all crc-strip on
> +      testpmd> port start all
> +      testpmd> set promisc all off
> +      testpmd> set fwd mac
> +      testpmd> start
> +
> +7. Use scapy to send 100 random packets with ip link set MAC to VF, verify
> the
> +   packets can be received by one VF and can be forward to another VF
> +   correctly.
> +
> +8. Also use scapy to send 100 random packets with a wrong MAC to VF,
> verify
> +   the packets can't be received by one VF and can be forward to another
> VF
> +   correctly.
> --
> 2.17.2
Previous message: [dts] [PATCH V2 2/2] test_plans/vf macfilter: add dpdk pf test scenorio
Next message: [dts] [PATCH V2 1/2] tests/vf macfilter: add dpdk pf test scenorio
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the dts mailing list