[dts] [PATCH v2] test_plans/pvp_multi_paths_virtio_max_efficiency: add test plan of pvp multi-paths for virtio max efficiency

Yao, Lei A lei.a.yao at intel.com
Sat Jan 19 03:20:00 CET 2019



> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Yinan
> Sent: Thursday, January 10, 2019 8:51 AM
> To: dts at dpdk.org
> Cc: Wang, Yinan <yinan.wang at intel.com>
> Subject: [dts] [PATCH v2] test_plans/pvp_multi_paths_virtio_max_efficiency:
> add test plan of pvp multi-paths for virtio max efficiency
> 
> From: Wang Yinan <yinan.wang at intel.com>
> 
> Signed-off-by: Wang Yinan <yinan.wang at intel.com>
> ---
>  ..._paths_virtio_max_efficiency_test_plan.rst | 218 ++++++++++++++++++
>  1 file changed, 218 insertions(+)
>  create mode 100644
> test_plans/pvp_multi_paths_virtio_max_efficiency_test_plan.rst
> 
> diff --git a/test_plans/pvp_multi_paths_virtio_max_efficiency_test_plan.rst
> b/test_plans/pvp_multi_paths_virtio_max_efficiency_test_plan.rst
Virtio_single_core may be a better name
> new file mode 100644
> index 0000000..4433e56
> --- /dev/null
> +++ b/test_plans/pvp_multi_paths_virtio_max_efficiency_test_plan.rst
> @@ -0,0 +1,218 @@
> +.. Copyright (c) <2019>, Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=====================================
> +PVP multi-paths virtio max efficiency Tests
> +=====================================
> +
> +Description
> +===========
> +
> +Benchmark vhost/virtio-user PVP performance with 7 TX/RX PATHs.
> +Includes Mergeable, Normal, Vector_RX, Inorder mergeable,
> +Inorder no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +For virtio max efficiency, give 2 cores for vhost and 1 core for virtio.
> +
> +Test Case 1: vhost/virtio-user pvp test with Virtio 1.1 mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
Should use io fwd here to lower the workload at vhost side. 
As the test target is just virtio core here. 
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 2: vhost/virtio-user pvp test with Virtio 1.1 no-mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 3: vhost/virtio-user pvp test with Inorder mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 4: vhost/virtio-user pvp test with Inorder no-mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 5: vhost/virtio-user pvp test with Mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 6: vhost/virtio-user pvp test with Normal path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 7: vhost/virtio-user pvp test with Vector_RX path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> --
> 2.17.1



More information about the dts mailing list