[dts] [PATCH]test_plans: change case for bug dpdk-20053 and dpdk-22078
Tu, Lijuan
lijuan.tu at intel.com
Fri Jul 24 03:30:20 CEST 2020
Applied, thanks
> -----Original Message-----
> From: dts <dts-bounces at dpdk.org> On Behalf Of Peng Yuan
> Sent: 2020年7月17日 2:10
> To: dts at dpdk.org
> Cc: Peng, Yuan <yuan.peng at intel.com>
> Subject: [dts] [PATCH]test_plans: change case for bug dpdk-20053 and dpdk-
> 22078
>
> change case for consistant to the dpdk patch of dpdk-20053.
> add case to verify the bug dpdk-22078.
>
> Signed-off-by: Peng Yuan <yuan.peng at intel.com>
>
> diff --git a/test_plans/iavf_fdir_test_plan.rst b/test_plans/iavf_fdir_test_plan.rst
> index 1a24773..eb35b8c 100644
> --- a/test_plans/iavf_fdir_test_plan.rst
> +++ b/test_plans/iavf_fdir_test_plan.rst
> @@ -2270,6 +2270,7 @@ Subcase 6: conflicted rules 1. Create a FDIR rule::
>
> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21
> ttl is 2 tos is 4 / end actions queue index 1 / end
> + flow create 0 ingress pattern eth / ipv6 dst is
> + CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions
> + queue index 1 / mark / end
>
> the rule is created successfully.
>
> @@ -2277,10 +2278,38 @@ Subcase 6: conflicted rules
>
> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21
> ttl is 2 tos is 4 / end actions queue index 2 / end
> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21
> ttl is 2 tos is 4 / end actions drop / end
> + flow create 0 ingress pattern eth / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions queue
> index 2 / mark / end
> + flow create 0 ingress pattern eth / ipv6 dst is
> + CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions
> + rss queues 2 3 end / mark / end
>
> Failed to create the two flows, report message::
>
> - Add filter rule failed.: Operation not permitted
> + iavf_fdir_add(): Failed to add rule request due to the rule is already existed
> + iavf_flow_create(): Failed to create flow
> + port_flow_complain(): Caught PMD error type 2 (flow rule (handle)):
> + Failed to create parser engine.: Invalid argument
> +
> +3. Create a rule with same pattern but different input set::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.21 ttl is 2 tos is 4 /
> end actions queue index 3 / mark / end
> + flow create 0 ingress pattern eth / ipv6 dst is
> + CDCD:910A:2222:5498:8475:1111:3900:2021 / end actions mark / end
> +
> + Failed to create the flow, report message::
> +
> + iavf_fdir_add(): Failed to add rule request due to the rule is conflict with
> existing rule
> + iavf_flow_create(): Failed to create flow
> + port_flow_complain(): Caught PMD error type 2 (flow rule (handle)):
> + Failed to create parser engine.: Invalid argument
> +
> +3. Create a rule with conflicted patterns::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.22 / udp src is 10 dst is 20 / end actions queue index 4 / mark id 4 /
> end
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.23 ttl is 2 tos is 4 / udp src is 10 dst is 20 / end actions queue index 5 /
> mark id 5 / end
> + flow create 0 ingress pattern eth / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / udp src is 22 dst is
> 23 / end actions queue index 1 / mark / end
> + flow create 0 ingress pattern eth / ipv6 dst is
> + CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::3 / udp src is 22
> + dst is 23 / end actions queue index 1 / mark / end
> +
> + Failed to create the two flows, report message::
> +
> + iavf_fdir_add(): Failed to add rule request due to the rule is conflict with
> existing rule
> + iavf_flow_create(): Failed to create flow
> + port_flow_complain(): Caught PMD error type 2 (flow rule (handle)):
> + Failed to create parser engine.: Invalid argument
>
> 3. check there is only one rule listed.
>
> @@ -2922,66 +2951,64 @@ Subcase 5: 128 profiles
>
> 2. create 10 rules with different patterns on each port::
>
> - flow create 0 ingress pattern eth / ipv4 proto is 255 / end actions queue index
> 1 / mark / end
> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21
> / udp src is 22 dst is 23 / end actions queue index 1 / mark / end
> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21
> / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end
> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21
> / sctp src is 22 dst is 23 / end actions queue index 1 / mark / end
> - flow create 0 ingress pattern eth / ipv6 proto is 0 / end actions mark / rss /
> end
> flow create 0 ingress pattern eth / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / udp src is 22 dst is
> 23 / end actions queue index 1 / mark / end
> flow create 0 ingress pattern eth / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / tcp src is 22 dst is
> 23 / end actions queue index 1 / mark / end
> flow create 0 ingress pattern eth / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / sctp src is 22 dst is
> 23 / end actions queue index 1 / mark / end
> flow create 0 ingress pattern eth type is 0x8863 / end actions queue index 1 /
> mark id 1 / end
> flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions
> queue index 2 / end
>
> - created successfully on port 0-10,
> - failed from rule on port 11::
> + created successfully on port 0-12,
> + failed from rule 6 on port 13::
>
> - testpmd> flow create 11 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end
> + testpmd> flow create 13 ingress pattern eth type is 0x8863 / end
> + actions queue index 1 / mark id 1 / end
> eth
> iavf_execute_vf_cmd(): No response or return failure (-5) for cmd 47
> iavf_fdir_add(): fail to execute command OP_ADD_FDIR_FILTER
> iavf_flow_create(): Failed to create flow
> port_flow_complain(): Caught PMD error type 2 (flow rule (handle)): Add filter
> rule failed.: Operation not permitted
>
> -3. list the rules on port 0-10::
> +3. list the rules on port 0-12::
>
> testpmd> flow list 10
> ID Group Prio Attr Rule
> - 0 0 0 i-- ETH IPV4 => QUEUE MARK
> - 1 0 0 i-- ETH IPV4 UDP => QUEUE MARK
> - 2 0 0 i-- ETH IPV4 TCP => QUEUE MARK
> - 3 0 0 i-- ETH IPV4 SCTP => QUEUE MARK
> - 4 0 0 i-- ETH IPV6 => MARK RSS MARK
> - 5 0 0 i-- ETH IPV6 UDP => QUEUE MARK
> - 6 0 0 i-- ETH IPV6 TCP => QUEUE MARK
> - 7 0 0 i-- ETH IPV6 SCTP => QUEUE MARK
> - 8 0 0 i-- ETH => QUEUE MARK
> - 9 0 0 i-- ETH IPV4 UDP PFCP => QUEUE
> -
> - list the rules on port 11-15, there is no rule listed.
> + 0 0 0 i-- ETH IPV4 UDP => QUEUE MARK
> + 1 0 0 i-- ETH IPV4 TCP => QUEUE MARK
> + 2 0 0 i-- ETH IPV4 SCTP => QUEUE MARK
> + 3 0 0 i-- ETH IPV6 UDP => QUEUE MARK
> + 4 0 0 i-- ETH IPV6 TCP => QUEUE MARK
> + 5 0 0 i-- ETH IPV6 SCTP => QUEUE MARK
> + 6 0 0 i-- ETH => QUEUE MARK
> + 7 0 0 i-- ETH IPV4 UDP PFCP => QUEUE
> +
> + list the rules on port 13, there are only 6 rules listed.
> + list the rules on port 14/15, there is no rule listed.
> 110 rules can be created successfully, which applied 110 profiles.
>
> Note: there are 128 profiles in total.
> each pf apply for 8 profiles when kernel driver init,
> 4 for non-tunnel packet, 4 for tunnel packet.
> profile 0 and profile 1 are default profile for specific packet.
> - we use 2*100G card, so only 110 profiles can be used for vf.
> + we design case with 2*100G card, so 110 profiles can be used for vf.
> + if we use 4*25G card, only 94 profiles can be used for vf.
>
> -4. send matched packets to port 10,
> +4. send matched packets to vf 12,
> the packets are redirected to the expected queue.
>
> -5. flush rules on port 10::
> +5. flush rules on port 12::
>
> - flow flush 10
> + flow flush 12
>
> - there is no rule listed on port 10.
> + there is no rule listed on port 12.
> all the rule can be listed correctly in other ports.
> - send matched packets to port 10,
> + send matched packets to port 12,
> the packets are received without FDIR matched ID.
>
> -6. create rule on port 11 again::
> +6. create rule on port 13 again::
>
> - testpmd> flow create 11 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end
> + testpmd> flow create 13 ingress pattern eth type is 0x8863 / end
> + actions queue index 1 / mark id 1 / end
> eth
> iavf_execute_vf_cmd(): No response or return failure (-5) for cmd 47
> iavf_fdir_add(): fail to execute command OP_ADD_FDIR_FILTER @@ -3020,7
> +3047,7 @@ Subcase 2: add/delete rules
>
> 1. create two rules::
>
> - flow create 0 ingress pattern eth / ipv4 proto is 255 / end actions queue index
> 1 / mark / end
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> + 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 1 /
> + mark id 0 / end
> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21
> / tcp src is 22 dst is 23 / end actions rss queues 2 3 end / mark id 1 / end
>
> return the message::
> @@ -3032,7 +3059,7 @@ Subcase 2: add/delete rules
>
> testpmd> flow list 0
> ID Group Prio Attr Rule
> - 0 0 0 i-- ETH IPV4 => QUEUE MARK
> + 0 0 0 i-- ETH IPV4 UDP => QUEUE MARK
> 1 0 0 i-- ETH IPV4 TCP => RSS MARK
>
> 2. delete the rules::
> @@ -3045,7 +3072,7 @@ Subcase 2: add/delete rules
>
> 5. send matched packet::
>
> -
> sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21
> ", proto=255)/Raw('x' * 80)],iface="enp134s0f1")
> +
> + sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.1
> + 68.0.21")/UDP(sport=22,dport=23)/Raw('x' * 80)],iface="enp134s0f1")
>
> sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21
> ")/TCP(sport=22,dport=23)/Raw('x' * 80)],iface="enp134s0f1")
>
> check packet 1 is redirected to queue 1 with FDIR matched ID=0x0 @@ -
> 3328,6 +3355,52 @@ Subcase 8: PF reset VF and delete the rule
>
> 8. send matched packets, check them redirected to expected queue with FDIR
> matched ID.
>
> +Subcase 9: check profile delete
> +-------------------------------
> +
> +1. create ipv4-tcp and ipv6-udp rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / tcp src is 22 dst is 23 / end actions queue index 1 / mark id 0 / end
> + flow create 0 ingress pattern eth / ipv6 dst is
> + CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 hop is 2 tc is
> + 1 / udp src is 22 dst is 23 / end actions queue index 2 / mark id 2 /
> + end
> +
> + return the message::
> +
> + Flow rule #0 created
> + Flow rule #1 created
> +
> + list the rules::
> +
> + testpmd> flow list 0
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH IPV4 TCP => QUEUE MARK
> + 1 0 0 i-- ETH IPV6 UDP => QUEUE MARK
> +
> +2. send ipv4-pay and ipv6-pay packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21
> ")/Raw('x' * 80)],iface="enp134s0f1")
> +
> + sendp([Ether(dst="00:11:22:33:44:55")/IPv6(dst="CDCD:910A:2222:5498:84
> + 75:1111:3900:2020", src="2001::2", tc=1, hlim=2)/("X"*480)],
> + iface="enp134s0f1")
> +
> + check the two packets are distributed by RSS without FDIR matched ID.
> +
> +3. delete the rules, and create a ipv4-other and a ipv6-other rule::
> +
> + flow flush 0
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / end actions queue index 3 / mark id 3 / end
> + flow create 0 ingress pattern eth / ipv6 dst is
> + CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 hop is 2 tc is
> + 1 / end actions queue index 4 / mark id 4 / end
> +
> +4. send the two packets again,
> + check ipv4-pay packet is redirected to queue 3 with FDIR matched ID=0x3
> + check ipv6-pay packet is redirected to queue 4 with FDIR matched
> +ID=0x4
> +
> +5. delete the rules, and create ipv4-tcp and ipv6-udp rules again::
> +
> + flow flush 0
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / tcp src is 22 dst is 23 / end actions queue index 1 / mark id 0 / end
> + flow create 0 ingress pattern eth / ipv6 dst is
> + CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 hop is 2 tc is
> + 1 / udp src is 22 dst is 23 / end actions queue index 2 / mark id 2 /
> + end
> +
> +6. send the two packets again,
> + check the two packets are distributed by RSS without FDIR matched ID.
> +
> Test case: PFCP coverage test
> =============================
> Subcase 1: PFCP FDIR vlan strip on HW checksum offload check
> --
> 2.7.4
More information about the dts
mailing list