[dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test

Tu, Lijuan lijuan.tu at intel.com
Tue Jun 2 07:47:59 CEST 2020


Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Xiao Qimai
> Sent: Tuesday, May 12, 2020 1:58 PM
> To: dts at dpdk.org
> Cc: Xiao, QimaiX <qimaix.xiao at intel.com>
> Subject: [dts] [PATCH V1]unit_tests_loopback: update compile cmd of
> app/test
> 
> *. update compile cmd of app/test according to dpdk's update
> 
> Signed-off-by: Xiao Qimai <qimaix.xiao at intel.com>
> ---
>  tests/TestSuite_unit_tests_loopback.py | 24 +++++++++++++-----------
>  1 file changed, 13 insertions(+), 11 deletions(-)
> 
> diff --git a/tests/TestSuite_unit_tests_loopback.py
> b/tests/TestSuite_unit_tests_loopback.py
> index 68b1f30..c1d37b2 100644
> --- a/tests/TestSuite_unit_tests_loopback.py
> +++ b/tests/TestSuite_unit_tests_loopback.py
> @@ -70,6 +70,8 @@ class TestUnitTestsLoopback(TestCase):
>          self.verify(self.arch in ["x86_64", "arm64"], "pmd perf request running
> in x86_64 or arm64")
>          self.max_traffic_burst = self.get_max_traffic_burst()
>          self.dut.send_expect("sed -i -e 's/#define
> MAX_TRAFFIC_BURST              %s/#define MAX_TRAFFIC_BURST              32/'
> app/test/test_pmd_perf.c" % self.max_traffic_burst, "# ", 30)
> +        self.tmp_path = '/tmp/test_pmd_perf.c'
> +        self.dut.send_expect("cp app/test/test_pmd_perf.c %s" %
> + self.tmp_path, "# ")
> 
>      def set_up(self):
>          """
> @@ -90,14 +92,14 @@ class TestUnitTestsLoopback(TestCase):
>          Run pmd stream control mode burst test case.
>          """
>          self.dut.send_expect("sed -i -e 's/lpbk_mode = 0/lpbk_mode = 1/'
> app/test/test_pmd_perf.c", "# ", 30)
> -        out = self.dut.build_dpdk_apps('app/test')
> -        self.verify("Error" not in out, "Compilation error")
> +        out = self.dut.send_expect("make -j %s app/test_sub O=%s" %
> (self.dut.number_of_cores, self.target), "#")
> +        self.verify("Error" not in out, "compilation l3fwd-power
> + error")
>          self.verify("No such" not in out, "Compilation error")
> 
>          self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#")
> -        self.tester.send_expect("tcpdump -i %s -w ./getPackageByTcpdump.cap
> 2> /dev/null& " % self.tester_itf, "#")
> +        self.tester.send_expect("tcpdump -i %s ether[12:2] != '0x88cc'
> + -w ./getPackageByTcpdump.cap 2> /dev/null& " % self.tester_itf, "#")
>          eal_params = self.dut.create_eal_parameters(cores=self.cores)
> -        self.dut.send_expect("./app/test/test %s" % (eal_params),
> "R.*T.*E.*>.*>", 60)
> +        self.dut.send_expect("./%s/app/test %s" % (self.target,
> + eal_params), "R.*T.*E.*>.*>", 60)
>          out = self.dut.send_expect("pmd_perf_autotest", "RTE>>", 120)
>          print(out)
>          self.dut.send_expect("quit", "# ") @@ -113,14 +115,14 @@ class
> TestUnitTestsLoopback(TestCase):
>          """
>          self.dut.send_expect("sed -i -e 's/lpbk_mode = 1/lpbk_mode = 0/'
> app/test/test_pmd_perf.c", "# ", 30)
>          self.dut.send_expect("sed -i -e '/check_all_ports_link_status(nb_ports,
> RTE_PORT_ALL);/a\        sleep(6);' app/test/test_pmd_perf.c", "# ", 30)
> -        out = self.dut.build_dpdk_apps('app/test')
> -        self.verify("Error" not in out, "Compilation error")
> +        out = self.dut.send_expect("make -j %s app/test_sub O=%s" %
> (self.dut.number_of_cores, self.target), "#")
> +        self.verify("Error" not in out, "compilation l3fwd-power
> + error")
>          self.verify("No such" not in out, "Compilation error")
> 
>          self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#")
>          self.tester.send_expect("tcpdump -i %s -w ./getPackageByTcpdump.cap
> 2> /dev/null& " % self.tester_itf, "#")
>          eal_params = self.dut.create_eal_parameters(cores=self.cores)
> -        self.dut.send_expect("./app/test/test %s" % (eal_params),
> "R.*T.*E.*>.*>", 60)
> +        self.dut.send_expect("./%s/app/test %s" % (self.target,
> + eal_params), "R.*T.*E.*>.*>", 60)
>          self.dut.send_command("pmd_perf_autotest", 30)
>          # There is no packet loopback, so the test is hung.
>          # It needs to kill the process manually.
> @@ -133,16 +135,16 @@ class TestUnitTestsLoopback(TestCase):
>          """
>          Run after each test case.
>          """
> +        self.dut.send_expect("cp %s app/test/test_pmd_perf.c" %
> + self.tmp_path, "# ")
>          self.dut.kill_all()
> 
>      def tear_down_all(self):
>          """
>          Run after each test suite.
>          """
> -        self.dut.send_expect("sed -i -e 's/lpbk_mode = 0/lpbk_mode = 1/'
> app/test/test_pmd_perf.c", "# ", 30)
> -        self.dut.send_expect("sed -i -e '/sleep(6)/d' app/test/test_pmd_perf.c",
> "# ", 30)
> +        self.dut.send_expect("cp %s app/test/test_pmd_perf.c" %
> + self.tmp_path, "# ")
>          self.dut.send_expect("sed -i -e 's/#define MAX_TRAFFIC_BURST
> 32/#define MAX_TRAFFIC_BURST              %s/' app/test/test_pmd_perf.c" %
> self.max_traffic_burst, "# ", 30)
> -        out = self.dut.build_dpdk_apps('app/test')
> -        self.verify("Error" not in out, "Compilation error")
> +        out = self.dut.send_expect("make -j %s app/test_sub O=%s" %
> (self.dut.number_of_cores, self.target), "#")
> +        self.verify("Error" not in out, "compilation l3fwd-power
> + error")
>          self.verify("No such" not in out, "Compilation error")
>          self.dut.kill_all()
> --
> 1.8.3.1



More information about the dts mailing list