[dts] [PATCH V1 1/2] test_plans/ftag_test_plan: remove ftag_test_plan

Yan Xia yanx.xia at intel.com
Thu May 20 05:41:56 CEST 2021


Signed-off-by: Yan Xia <yanx.xia at intel.com>
---
 test_plans/ftag_test_plan.rst | 110 ----------------------------------
 1 file changed, 110 deletions(-)
 delete mode 100644 test_plans/ftag_test_plan.rst

diff --git a/test_plans/ftag_test_plan.rst b/test_plans/ftag_test_plan.rst
deleted file mode 100644
index 413d0cee..00000000
--- a/test_plans/ftag_test_plan.rst
+++ /dev/null
@@ -1,110 +0,0 @@
-.. Copyright (c) <2016-2017>, Intel Corporation
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   - Neither the name of Intel Corporation nor the names of its
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-   OF THE POSSIBILITY OF SUCH DAMAGE.
-
-===========================
-FM10k FTAG Forwarding Tests
-===========================
-
-FM10000 supports the addition of a Fabric Tag (FTAG) to carry special
-information between Switches, between Switch and PCIe Host Interface or
-between Switch and Tunneling Engines. This tag is essential for a set of
-switches to behave like one switch (switch aggregation).
-
-The FTAG is placed at the beginning of the frame.  The case will validate
-packet forwarding function based on FTAG.
-
-Prerequisites
-=============
-
-Turn on CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD in common_linuxapp configuration file.
-Startup testpoint and export Port0 and Port1's GLORT ID.
-
-Strip port logic value from mac table information.
-There's the sample output from RubyRapid. From the output, port0's logic
-value is 4122 and port1's logic value is 4123::
-
-    <0>% show mac table all
-    MAC                Mode      FID1 FID2 Type   Value  Trig ...
-    ------------------ --------- ---- ---- ------ ------ -----
-    00:00:00:00:01:01  Dynamic   1    NA   Local  1      1
-    a0:36:9f:60:b6:6e  Static    1    NA   PF/VF  4506   1
-    a0:36:9f:60:b6:68  Static    1    NA   PF/VF  4123   1
-    00:00:00:00:01:00  Dynamic   1    NA   Local  1      1
-    a0:36:9f:60:b6:66  Static    1    NA   PF/VF  4122   1
-
-
-Strip port glort ID from stacking information.
-There's the sample output from RubyRapid. Logic port0's GLORT ID is 0x4000.
-Logic port1's GLORT ID is 0x4200::
-
-    show stacking logical-port all
-    <0>% show stacking logical-port all
-
-    SW  GLORT  LOGICAL PORT   PORT TYPE
-    ---- ----- --------------- ---------
-    ...
-    0 0x4000         4122    ?
-    0 0x4200         4123    ?
-
-Add port's GLORT ID into environment variables::
-
-    export PORT1_GLORT=0x4200
-    export PORT0_GLORT=0x4000
-
-Test Case: Ftag forwarding unit test
-====================================
-
-1. port 0 pci 85:00.0, port 1 pci 87:00.0,start test application::
-
-       ./x86_64-native-linuxapp-gcc/app/test -c f -n 4 -w 0000:85:00.0,enable_ftag=1 -w 0000:87:00.0,enable_ftag=1
-
-2. Run FTAG test function::
-
-    RTE>>fm10k_ftag_autotest
-
-3. Send one packet to Port0 and verify packet with ftag forwarded to Port1::
-
-    Receive 1 packets on port 0
-    test for FTAG RX passed
-    Send out 1 packets with FTAG on port 0
-    Receive 1 packets on port 1
-    test for FTAG TX passed
-    Test OK
-
-4. Send one packet to Port1 and verify packet with ftag forwarded to Port0::
-
-    Receive 1 packets on port 0
-    test for FTAG RX passed
-    Send out 1 packets with FTAG on port 0
-    Receive 1 packets on port 1
-    test for FTAG TX passed
-    Test OK
-- 
2.17.1



More information about the dts mailing list