[spp] [PATCH v2 01/12] drivers/vhost: add multi process supported vhost PMD for SPP

[Itsuro ODA]

Hi,

Oops.

> The API of these methods are diffrent from v18.08 and v18.11 (or after).
> You seem to make under v18.11 (or after). The patch is under v18.08.
> Make sure your RTE_SDK.

v18.08 -> v19.08
v18.11 -> v19.11

Thanks.

On Wed, 08 Jan 2020 10:17:52 +0900
Itsuro ODA <oda at valinux.co.jp> wrote:

> Hi Yasufumi,
> 
> On Tue, 7 Jan 2020 19:41:52 +0900
> Yasufumi Ogawa <yasufum.o at gmail.com> wrote:
> 
> > Hi,
> > 
> > On 2019/12/25 13:49, Itsuro Oda wrote:
> > > vhost PMD can not be used by secondary processes since DPDK 18.11.
> > > SPP project decided to have own vhost PMD which can be used by
> > > secondary processes at the moment. This vhost PMD is based on the
> > > original vhost PMD but is simplified very much only to support
> > > functions used by SPP. Thereby it becomes easy to fix the probrem.
> > >
> > > The main idea of the fix is that execution of vhost start/stop
> > > is moved to eth_dev_start/stop from probe/remove.
> > >
> > > Note that only process which executes eth_dev_start can use the
> > > vhost device although the vhost device is shared among the primary
> > > process and secondary processes. Once eth_dev_stop is executed by
> > > the process which used the vhost device, it is available to be
> > > used by any process. It is user responsibility that multipul
> > > processes don't use the vhost device at the same time.
> > >
> > > Signed-off-by: Itsuro Oda <oda at valinux.co.jp>
> > > ---
> > >   src/drivers/vhost/Makefile                    |  28 +
> > >   .../vhost/rte_pmd_spp_vhost_version.map       |   4 +
> > >   src/drivers/vhost/rte_spp_vhost.c             | 588 ++++++++++++++++++
> > >   3 files changed, 620 insertions(+)
> > >   create mode 100644 src/drivers/vhost/Makefile
> > >   create mode 100644 src/drivers/vhost/rte_pmd_spp_vhost_version.map
> > >   create mode 100644 src/drivers/vhost/rte_spp_vhost.c
> > >
> > > diff --git a/src/drivers/vhost/Makefile b/src/drivers/vhost/Makefile
> > [...]
> > > +
> > > +static inline struct pmd_internal *
> > > +find_internal_resource(int vid)
> > > +{
> > > +	struct pmd_internal *internal;
> > > +	int i;
> > > +	char ifname[PATH_MAX];
> > This variable is declared, but not used from anywhere.
> > 
> > > +
> > > +	if (rte_vhost_get_ifname(vid, ifname, sizeof(ifname)) == -1)
> > > +		return NULL;
> > [...]
> 
> rte_vhost_get_ifname stores interface name to ifname.
> ifname is compared with internal->ifname a few after lines.
> "if (internal != NULL && !strcmp(internal->iface_name, ifname)) " 
> 
> > > +}
> > > +
> > > +static const struct eth_dev_ops ops = {
> > > +	.dev_start = eth_dev_start,
> > > +	.dev_stop = eth_dev_stop,
> > > +	.dev_configure = eth_dev_configure,
> > > +	.dev_infos_get = eth_dev_info, > +	.rx_queue_setup = eth_rx_queue_setup,
> > > +	.tx_queue_setup = eth_tx_queue_setup,
> > > +	.rx_queue_release = eth_queue_release,
> > > +	.tx_queue_release = eth_queue_release,
> > > +	.link_update = eth_link_update,
> > > +	.stats_get = eth_stats_get,
> > > +	.stats_reset = eth_stats_reset,
> > > +};
> > This struct causes compilation errors because of incompatible pointer types.
> > 
> > $ make
> > == src
> > == drivers
> > == vhost
> >    CC rte_spp_vhost.o
> > rte_spp_vhost.c:371:19: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
> >    .dev_infos_get = eth_dev_info,
> >                     ^~~~~~~~~~~~
> > rte_spp_vhost.c:371:19: note: (near initialization for ‘ops.dev_infos_get’)
> > rte_spp_vhost.c:378:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
> >    .stats_reset = eth_stats_reset,
> >                   ^~~~~~~~~~~~~~~
> > rte_spp_vhost.c:378:17: note: (near initialization for ‘ops.stats_reset’)
> > cc1: error: unrecognized command line option ‘-Wno-address-of-packed-member’ [-Werror]
> > cc1: all warnings being treated as errors
> > 
> >  From my understanding, eth_dev_info() and eth_stats_reset() are defined as void in your patch, but DPDK expects int by referring the definition of eth_dev_ops in lib/librte_ethdev/rte_ethdev_core.h:609.
> 
> The API of these methods are diffrent from v18.08 and v18.11 (or after).
> You seem to make under v18.11 (or after). The patch is under v18.08.
> Make sure your RTE_SDK.
> 
> > Regards,
> > Yasufumi
> 
> Thanks.
> 
> > > +
> > > +static int
> > [...]
> 
> -- 
> Itsuro ODA <oda at valinux.co.jp>

-- 
Itsuro ODA <oda at valinux.co.jp>