[dpdk-stable] [PATCH 00/24] backport for 19.11.4

[Wei Hu (Xavier)]

Hi, Luca Boccassi

On 2020/8/17 17:51, Luca Boccassi wrote:
> On Mon, 2020-08-17 at 17:25 +0800, Wei Hu (Xavier) wrote:
>> This series are backport for 19.11.4 about hns3 PMD driver, bonding
>> and testpmd.
>>
>> Chengchang Tang (6):
>>    net/hns3: remove restriction on setting VF MTU
>>    net/hns3: support promiscuous and allmulticast mode for VF
>>    net/hns3: fix adding multicast MAC address
>>    net/hns3: decrease non-nearby memory access in Rx
>>    net/hns3: support setting VF PVID by PF driver
>>    net/hns3: cleanup duplicated code on processing TSO in Tx
>>
>> Chengwen Feng (1):
>>    net/hns3: get Rx/Tx queue fbd in xstats
>>
>> Hao Chen (1):
>>    net/hns3: optimize default RSS algorithm
>>
>> Hongbo Zheng (3):
>>    net/hns3: get link status change through mailbox
>>    net/hns3: support TSO
>>    net/hns3: check TSO segment size during Tx
>>
>> Lijun Ou (4):
>>    net/hns3: remove unnecessary branch
>>    net/hns3: support symmetric RSS
>>    net/hns3: report Tx descriptor segment limitations
>>    app/testpmd: remove hardcoded descriptors limit
>>
>> Wei Hu (Xavier) (8):
>>    net/hns3: support setting VF MAC address by PF driver
>>    net/hns3: get Tx abnormal errors in xstats
>>    net/hns3: get PCI revision ID
>>    net/hns3: support LRO
>>    net/hns3: get device capability in primary process
>>    net/hns3: support copper media type
>>    net/hns3: fix reassembling multiple segment packets in Tx
>>    net/hns3: fix inserted VLAN tag position in Tx
>>
>> Weifeng Li (1):
>>    net/bonding: change state machine to defaulted
>>
>>   app/test-pmd/cmdline.c                        |  11 +-
>>   app/test-pmd/testpmd.c                        | 171 ++++++
>>   app/test-pmd/testpmd.h                        |   2 +
>>   doc/guides/nics/features/hns3.ini             |   2 +
>>   doc/guides/nics/features/hns3_vf.ini          |   4 +
>>   doc/guides/nics/hns3.rst                      |   2 +
>>   drivers/net/bonding/eth_bond_8023ad_private.h |   3 +
>>   drivers/net/bonding/rte_eth_bond_8023ad.c     |  21 +-
>>   drivers/net/hns3/hns3_ethdev.c                | 269 ++++++--
>>   drivers/net/hns3/hns3_ethdev.h                |  34 +-
>>   drivers/net/hns3/hns3_ethdev_vf.c             | 578 +++++++++++++++---
>>   drivers/net/hns3/hns3_flow.c                  |  12 +-
>>   drivers/net/hns3/hns3_mbx.c                   |  93 +++
>>   drivers/net/hns3/hns3_mbx.h                   |  13 +
>>   drivers/net/hns3/hns3_rss.c                   |  35 +-
>>   drivers/net/hns3/hns3_rss.h                   |   6 +-
>>   drivers/net/hns3/hns3_rxtx.c                  | 525 ++++++++++++++--
>>   drivers/net/hns3/hns3_rxtx.h                  |  65 +-
>>   drivers/net/hns3/hns3_stats.c                 | 243 +++++---
>>   drivers/net/hns3/hns3_stats.h                 |   3 +-
>>   20 files changed, 1779 insertions(+), 313 deletions(-)
> Hi,
>
> If I understand correctly, this series adds support for 6 new features:
>
> --- a/doc/guides/nics/features/hns3.ini
> +++ b/doc/guides/nics/features/hns3.ini
> @@ -8,6 +8,8 @@ Link status          = Y
>   Rx interrupt         = Y
>   MTU update           = Y
>   Jumbo frame          = Y
> +TSO                  = Y
> +LRO                  = Y
>   Promiscuous mode     = Y
>   Allmulticast mode    = Y
>   Unicast MAC filter   = Y
>
> --- a/doc/guides/nics/features/hns3_vf.ini
> +++ b/doc/guides/nics/features/hns3_vf.ini
> @@ -8,6 +8,10 @@ Link status          = Y
>   Rx interrupt         = Y
>   MTU update           = Y
>   Jumbo frame          = Y
> +TSO                  = Y
> +LRO                  = Y
> +Promiscuous mode     = Y
> +Allmulticast mode    = Y
>   Unicast MAC filter   = Y
>   Multicast MAC filter = Y
>   RSS hash             = Y
>
> None of those are available in 20.02, and LRO is not available in
> 20.05.
>
> What happens if a user upgrades from 19.11.4 with any of these features
> enabled to 20.02 or 20.05?

If a user upgrades from 19.11.4 to 20.02 or 20.05 based on hns3 network 
engine,

some features of hns3 will not be supported.  But in many cases 
customers prefer

to use the LTS version. We will recommend them to upgrade from 19.11.0 
to 19.11.4,

and will recommend that customers upgrade from 19.11.4 to 20.11.0 after the

release of 20.11.0.


     Regards

Xavier