patch 'net/hns3: fix redundant line break in log' has been queued to stable release 22.11.3

[Xueming Li]

Hi,

FYI, your patch has been queued to stable release 22.11.3

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 06/27/23. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://git.dpdk.org/dpdk-stable/log/?h=22.11-staging

This queued commit can be viewed at:
https://git.dpdk.org/dpdk-stable/commit/?h=22.11-staging&id=219305d22720dfc04bd8c363d9c6503e752eade8

Thanks.

Xueming Li <xuemingl at nvidia.com>

---
>From 219305d22720dfc04bd8c363d9c6503e752eade8 Mon Sep 17 00:00:00 2001
From: Dengdui Huang <huangdengdui at huawei.com>
Date: Fri, 2 Jun 2023 19:42:05 +0800
Subject: [PATCH] net/hns3: fix redundant line break in log
Cc: Xueming Li <xuemingl at nvidia.com>

[ upstream commit 0b5e15ea5f8841e43c63350e47cbfddbb92dc25c ]

This patch remove log redundant line break

Fixes: d51867db65c1 ("net/hns3: add initialization")
Fixes: c6332c3cf9f0 ("net/hns3: support module EEPROM dump")

Signed-off-by: Dengdui Huang <huangdengdui at huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3 at huawei.com>
---
 drivers/net/hns3/hns3_ethdev.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 6cf1dbc27c..d4ea9daddc 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -3635,7 +3635,7 @@ hns3_get_mac_ethertype_cmd_status(uint16_t cmdq_resp, uint8_t resp_code)
 
 	if (cmdq_resp) {
 		PMD_INIT_LOG(ERR,
-			     "cmdq execute failed for get_mac_ethertype_cmd_status, status=%u.\n",
+			     "cmdq execute failed for get_mac_ethertype_cmd_status, status=%u.",
 			     cmdq_resp);
 		return -EIO;
 	}
@@ -6235,7 +6235,7 @@ hns3_optical_module_existed(struct hns3_hw *hw)
 	ret = hns3_cmd_send(hw, &desc, 1);
 	if (ret) {
 		hns3_err(hw,
-			 "fail to get optical module exist state, ret = %d.\n",
+			 "fail to get optical module exist state, ret = %d.",
 			 ret);
 		return false;
 	}
@@ -6273,7 +6273,7 @@ hns3_get_module_eeprom_data(struct hns3_hw *hw, uint32_t offset,
 
 	ret = hns3_cmd_send(hw, desc, HNS3_SFP_INFO_CMD_NUM);
 	if (ret) {
-		hns3_err(hw, "fail to get module EEPROM info, ret = %d.\n",
+		hns3_err(hw, "fail to get module EEPROM info, ret = %d.",
 				ret);
 		return ret;
 	}
@@ -6310,7 +6310,7 @@ hns3_get_module_eeprom(struct rte_eth_dev *dev,
 		return -ENOTSUP;
 
 	if (!hns3_optical_module_existed(hw)) {
-		hns3_err(hw, "fail to read module EEPROM: no module is connected.\n");
+		hns3_err(hw, "fail to read module EEPROM: no module is connected.");
 		return -EIO;
 	}
 
@@ -6373,7 +6373,7 @@ hns3_get_module_info(struct rte_eth_dev *dev,
 		modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8636_MAX_LEN;
 		break;
 	default:
-		hns3_err(hw, "unknown module, type = %u, extra_type = %u.\n",
+		hns3_err(hw, "unknown module, type = %u, extra_type = %u.",
 			 sfp_type.type, sfp_type.ext_type);
 		return -EINVAL;
 	}
-- 
2.25.1

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2023-06-25 14:32:00.041831200 +0800
+++ 0057-net-hns3-fix-redundant-line-break-in-log.patch	2023-06-25 14:31:58.395773900 +0800
@@ -1 +1 @@
-From 0b5e15ea5f8841e43c63350e47cbfddbb92dc25c Mon Sep 17 00:00:00 2001
+From 219305d22720dfc04bd8c363d9c6503e752eade8 Mon Sep 17 00:00:00 2001
@@ -4,0 +5,3 @@
+Cc: Xueming Li <xuemingl at nvidia.com>
+
+[ upstream commit 0b5e15ea5f8841e43c63350e47cbfddbb92dc25c ]
@@ -10 +12,0 @@
-Cc: stable at dpdk.org
@@ -19 +21 @@
-index 64028778d0..dccd1d416f 100644
+index 6cf1dbc27c..d4ea9daddc 100644
@@ -22 +24 @@
-@@ -3631,7 +3631,7 @@ hns3_get_mac_ethertype_cmd_status(uint16_t cmdq_resp, uint8_t resp_code)
+@@ -3635,7 +3635,7 @@ hns3_get_mac_ethertype_cmd_status(uint16_t cmdq_resp, uint8_t resp_code)