patch 'net/ngbe: add special config for YT8531SH-CA PHY' has been queued to stable release 23.11.2

[Xueming Li]

Hi,

FYI, your patch has been queued to stable release 23.11.2

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 08/14/24. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://git.dpdk.org/dpdk-stable/log/?h=23.11-staging

This queued commit can be viewed at:
https://git.dpdk.org/dpdk-stable/commit/?h=23.11-staging&id=658060fffe00127261dcb5f279898822ee10fdd4

Thanks.

Xueming Li <xuemingl at nvidia.com>

---
>From 658060fffe00127261dcb5f279898822ee10fdd4 Mon Sep 17 00:00:00 2001
From: Jiawen Wu <jiawenwu at trustnetic.com>
Date: Tue, 18 Jun 2024 15:11:38 +0800
Subject: [PATCH] net/ngbe: add special config for YT8531SH-CA PHY
Cc: Xueming Li <xuemingl at nvidia.com>

[ upstream commit 79be49dd2d655f2f5e830f33115528276a994bae ]

YT8531SH-CA PHY will switch to SDS space automatically when UTP and
SDS media are not present, causing failure to link up. Add the special
configuration to fix it.

Fixes: 3d0af7066759 ("net/ngbe: setup PHY link")
Fixes: 1c44384fce76 ("net/ngbe: support custom PHY interfaces")

Signed-off-by: Jiawen Wu <jiawenwu at trustnetic.com>
---
 drivers/net/ngbe/base/ngbe_phy_yt.c | 4 ++++
 drivers/net/ngbe/base/ngbe_phy_yt.h | 2 ++
 2 files changed, 6 insertions(+)

diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.c b/drivers/net/ngbe/base/ngbe_phy_yt.c
index ea313cd9a5..a374b015fd 100644
--- a/drivers/net/ngbe/base/ngbe_phy_yt.c
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.c
@@ -320,6 +320,10 @@ skip_an_fiber:
 			value |= value_r4;
 			ngbe_write_phy_reg_mdi(hw, YT_ANA, 0, value);
 
+			/* config for yt8531sh-ca */
+			ngbe_write_phy_reg_ext_yt(hw, YT_SPEC_CONF, 0,
+						YT_SPEC_CONF_8531SH_CA);
+
 			/* software reset to make the above configuration
 			 * take effect
 			 */
diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.h b/drivers/net/ngbe/base/ngbe_phy_yt.h
index ddf992e79a..c45bec7ce7 100644
--- a/drivers/net/ngbe/base/ngbe_phy_yt.h
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.h
@@ -32,6 +32,8 @@
 #define YT_MISC				0xA006
 #define   YT_MISC_FIBER_PRIO		MS16(8, 0x1) /* 0 for UTP */
 #define   YT_MISC_RESV			MS16(0, 0x1)
+#define YT_SPEC_CONF			0xA023
+#define   YT_SPEC_CONF_8531SH_CA	0x4031
 
 /* SDS EXT */
 #define YT_AUTO				0xA5
-- 
2.34.1

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2024-08-12 20:44:05.015334400 +0800
+++ 0076-net-ngbe-add-special-config-for-YT8531SH-CA-PHY.patch	2024-08-12 20:44:02.235069322 +0800
@@ -1 +1 @@
-From 79be49dd2d655f2f5e830f33115528276a994bae Mon Sep 17 00:00:00 2001
+From 658060fffe00127261dcb5f279898822ee10fdd4 Mon Sep 17 00:00:00 2001
@@ -4,0 +5,3 @@
+Cc: Xueming Li <xuemingl at nvidia.com>
+
+[ upstream commit 79be49dd2d655f2f5e830f33115528276a994bae ]
@@ -12 +14,0 @@
-Cc: stable at dpdk.org