patch 'net/axgbe: fix SFP codes check for DAC cables' has been queued to stable release 21.11.8
Kevin Traynor
ktraynor at redhat.com
Fri Aug 23 18:17:30 CEST 2024
Hi,
FYI, your patch has been queued to stable release 21.11.8
Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 08/28/24. So please
shout if anyone has objections.
Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.
Queued patches are on a temporary branch at:
https://github.com/kevintraynor/dpdk-stable
This queued commit can be viewed at:
https://github.com/kevintraynor/dpdk-stable/commit/35429aa99d616f707ca5ad14c528b6195ebe5715
Thanks.
Kevin
---
>From 35429aa99d616f707ca5ad14c528b6195ebe5715 Mon Sep 17 00:00:00 2001
From: Venkat Kumar Ande <venkatkumar.ande at amd.com>
Date: Tue, 4 Jun 2024 17:41:40 +0530
Subject: [PATCH] net/axgbe: fix SFP codes check for DAC cables
[ upstream commit 4eefb1b16acaa69bd757057e0c54c58f11577ba3 ]
The current axgbe code assumes that offset 6 of EEPROM SFP DAC (passive)
cables is NULL. However, some cables (the 5 meter and 7 meter Molex
passive cables) have non-zero data at offset 6. Fix the logic by moving
the passive cable check above the active checks, so as not to be
improperly identified as an active cable. This will fix the issue for
any passive cable that advertises 1000Base-CX in offset 6.
Without the fix the user will not get link UP for few DAC cables.
Fixes: a5c7273771e8 ("net/axgbe: add phy programming APIs")
Signed-off-by: Venkat Kumar Ande <venkatkumar.ande at amd.com>
Acked-by: Selwin Sebastian <selwin.sebastian at amd.com>
---
drivers/net/axgbe/axgbe_phy_impl.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index a458722e2e..c17a074f59 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -625,5 +625,8 @@ static void axgbe_phy_sfp_parse_eeprom(struct axgbe_port *pdata)
/* Determine the type of SFP */
- if (sfp_base[AXGBE_SFP_BASE_10GBE_CC] & AXGBE_SFP_BASE_10GBE_CC_SR)
+ if (phy_data->sfp_cable == AXGBE_SFP_CABLE_PASSIVE &&
+ axgbe_phy_sfp_bit_rate(sfp_eeprom, AXGBE_SFP_SPEED_10000))
+ phy_data->sfp_base = AXGBE_SFP_BASE_10000_CR;
+ else if (sfp_base[AXGBE_SFP_BASE_10GBE_CC] & AXGBE_SFP_BASE_10GBE_CC_SR)
phy_data->sfp_base = AXGBE_SFP_BASE_10000_SR;
else if (sfp_base[AXGBE_SFP_BASE_10GBE_CC] & AXGBE_SFP_BASE_10GBE_CC_LR)
@@ -642,7 +645,4 @@ static void axgbe_phy_sfp_parse_eeprom(struct axgbe_port *pdata)
else if (sfp_base[AXGBE_SFP_BASE_1GBE_CC] & AXGBE_SFP_BASE_1GBE_CC_T)
phy_data->sfp_base = AXGBE_SFP_BASE_1000_T;
- else if ((phy_data->sfp_cable == AXGBE_SFP_CABLE_PASSIVE) &&
- axgbe_phy_sfp_bit_rate(sfp_eeprom, AXGBE_SFP_SPEED_10000))
- phy_data->sfp_base = AXGBE_SFP_BASE_10000_CR;
switch (phy_data->sfp_base) {
--
2.46.0
---
Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- - 2024-08-23 17:18:10.652255712 +0100
+++ 0022-net-axgbe-fix-SFP-codes-check-for-DAC-cables.patch 2024-08-23 17:18:09.642429833 +0100
@@ -1 +1 @@
-From 4eefb1b16acaa69bd757057e0c54c58f11577ba3 Mon Sep 17 00:00:00 2001
+From 35429aa99d616f707ca5ad14c528b6195ebe5715 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 4eefb1b16acaa69bd757057e0c54c58f11577ba3 ]
+
@@ -16 +17,0 @@
-Cc: stable at dpdk.org
@@ -25 +26 @@
-index bcefbf28f2..10196cae94 100644
+index a458722e2e..c17a074f59 100644
@@ -28 +29 @@
-@@ -626,5 +626,8 @@ static void axgbe_phy_sfp_parse_eeprom(struct axgbe_port *pdata)
+@@ -625,5 +625,8 @@ static void axgbe_phy_sfp_parse_eeprom(struct axgbe_port *pdata)
@@ -38 +39 @@
-@@ -643,7 +646,4 @@ static void axgbe_phy_sfp_parse_eeprom(struct axgbe_port *pdata)
+@@ -642,7 +645,4 @@ static void axgbe_phy_sfp_parse_eeprom(struct axgbe_port *pdata)
More information about the stable
mailing list