patch 'net/axgbe: enable PLL control for fixed PHY modes only' has been queued to stable release 22.11.6

luca.boccassi at gmail.com luca.boccassi at gmail.com
Tue Jun 25 01:58:14 CEST 2024


Hi,

FYI, your patch has been queued to stable release 22.11.6

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 06/27/24. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://github.com/bluca/dpdk-stable

This queued commit can be viewed at:
https://github.com/bluca/dpdk-stable/commit/07b6c26ee2bbe092c60b96d2dc5d44e067fe1055

Thanks.

Luca Boccassi

---
>From 07b6c26ee2bbe092c60b96d2dc5d44e067fe1055 Mon Sep 17 00:00:00 2001
From: Venkat Kumar Ande <venkatkumar.ande at amd.com>
Date: Tue, 4 Jun 2024 17:41:39 +0530
Subject: [PATCH] net/axgbe: enable PLL control for fixed PHY modes only

[ upstream commit 1c68b393b8ba05b6ddb321e3632d45fc1021ed96 ]

PLL control setting is needed only in fixed PHY configuration to
fix the peer-peer issues. Without the PLL control setting, the link up
takes longer time in a fixed PHY configuration.

Without the fix the user will not get the link come UP.

Driver implements SW RRC for Autoneg On configuration, hence PLL control
setting is not needed for AN On configuration, and can be skipped.

Also, PLL re-initialization is not needed for PHY Power Off and RRC
commands. Otherwise, they lead to mailbox errors. Added the changes
accordingly.

Fixes: 09b0a36cc7ae ("net/axgbe: toggle PLL settings during rate change")

Signed-off-by: Venkat Kumar Ande <venkatkumar.ande at amd.com>
Acked-by: Selwin Sebastian <selwin.sebastian at amd.com>
---
 drivers/net/axgbe/axgbe_phy_impl.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index 46ee5f0617..040176b8ef 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -1228,6 +1228,10 @@ static void axgbe_phy_rx_reset(struct axgbe_port *pdata)
 
 static void axgbe_phy_pll_ctrl(struct axgbe_port *pdata, bool enable)
 {
+	/* PLL_CTRL feature needs to be enabled for fixed PHY modes (Non-Autoneg) only */
+	if (pdata->phy.autoneg != AUTONEG_DISABLE)
+		return;
+
 	XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0,
 			XGBE_PMA_PLL_CTRL_MASK,
 			enable ? XGBE_PMA_PLL_CTRL_SET
@@ -1272,8 +1276,9 @@ static void axgbe_phy_perform_ratechange(struct axgbe_port *pdata,
 	axgbe_phy_rx_reset(pdata);
 
 reenable_pll:
-	 /* Re-enable the PLL control */
-	axgbe_phy_pll_ctrl(pdata, true);
+	/* Enable PLL re-initialization, not needed for PHY Power Off and RRC cmds */
+	if (cmd != 0 && cmd != 5)
+		axgbe_phy_pll_ctrl(pdata, true);
 
 	PMD_DRV_LOG(NOTICE, "firmware mailbox command did not complete\n");
 }
-- 
2.39.2

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2024-06-25 00:22:15.336087708 +0100
+++ 0028-net-axgbe-enable-PLL-control-for-fixed-PHY-modes-onl.patch	2024-06-25 00:22:13.117184263 +0100
@@ -1 +1 @@
-From 1c68b393b8ba05b6ddb321e3632d45fc1021ed96 Mon Sep 17 00:00:00 2001
+From 07b6c26ee2bbe092c60b96d2dc5d44e067fe1055 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 1c68b393b8ba05b6ddb321e3632d45fc1021ed96 ]
+
@@ -20 +21,0 @@
-Cc: stable at dpdk.org
@@ -29 +30 @@
-index f51830f800..bcefbf28f2 100644
+index 46ee5f0617..040176b8ef 100644


More information about the stable mailing list