patch 'net/axgbe: fix connection for SFP+ active cables' has been queued to stable release 22.11.6

luca.boccassi at gmail.com luca.boccassi at gmail.com
Tue Jun 25 01:58:16 CEST 2024


Hi,

FYI, your patch has been queued to stable release 22.11.6

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 06/27/24. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://github.com/bluca/dpdk-stable

This queued commit can be viewed at:
https://github.com/bluca/dpdk-stable/commit/73e8b7893e102f3c4d01dd7b510b1c64e3e6171f

Thanks.

Luca Boccassi

---
>From 73e8b7893e102f3c4d01dd7b510b1c64e3e6171f Mon Sep 17 00:00:00 2001
From: Venkat Kumar Ande <venkatkumar.ande at amd.com>
Date: Tue, 4 Jun 2024 17:41:41 +0530
Subject: [PATCH] net/axgbe: fix connection for SFP+ active cables

[ upstream commit 4823ccdbbd887bb84339a4d35febd92292d07b97 ]

SFP+ active and passive cables are copper cables with fixed SFP+ end
connectors. Due to a misinterpretation of this, SFP+ active cables could
end up not being recognized, causing the driver to fail to establish a
connection.

Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is
the default cable type, and handle active and passive cables when they
are specifically detected.

Fixes: a5c7273771e8 ("net/axgbe: add phy programming APIs")

Signed-off-by: Venkat Kumar Ande <venkatkumar.ande at amd.com>
Acked-by: Selwin Sebastian <selwin.sebastian at amd.com>
---
 drivers/net/axgbe/axgbe_phy_impl.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index 9aadbefaba..85b01bfa10 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -69,6 +69,7 @@ enum axgbe_sfp_cable {
 	AXGBE_SFP_CABLE_UNKNOWN = 0,
 	AXGBE_SFP_CABLE_ACTIVE,
 	AXGBE_SFP_CABLE_PASSIVE,
+	AXGBE_SFP_CABLE_FIBER,
 };
 
 enum axgbe_sfp_base {
@@ -616,16 +617,18 @@ static void axgbe_phy_sfp_parse_eeprom(struct axgbe_port *pdata)
 
 	axgbe_phy_sfp_parse_quirks(pdata);
 
-	/* Assume ACTIVE cable unless told it is PASSIVE */
+	/* Assume FIBER cable unless told otherwise */
 	if (sfp_base[AXGBE_SFP_BASE_CABLE] & AXGBE_SFP_BASE_CABLE_PASSIVE) {
 		phy_data->sfp_cable = AXGBE_SFP_CABLE_PASSIVE;
 		phy_data->sfp_cable_len = sfp_base[AXGBE_SFP_BASE_CU_CABLE_LEN];
-	} else {
+	} else if (sfp_base[AXGBE_SFP_BASE_CABLE] & AXGBE_SFP_BASE_CABLE_ACTIVE) {
 		phy_data->sfp_cable = AXGBE_SFP_CABLE_ACTIVE;
+	} else {
+		phy_data->sfp_cable = AXGBE_SFP_CABLE_FIBER;
 	}
 
 	/* Determine the type of SFP */
-	if (phy_data->sfp_cable == AXGBE_SFP_CABLE_PASSIVE &&
+	if (phy_data->sfp_cable != AXGBE_SFP_CABLE_FIBER &&
 		 axgbe_phy_sfp_bit_rate(sfp_eeprom, AXGBE_SFP_SPEED_10000))
 		phy_data->sfp_base = AXGBE_SFP_BASE_10000_CR;
 	else if (sfp_base[AXGBE_SFP_BASE_10GBE_CC] & AXGBE_SFP_BASE_10GBE_CC_SR)
-- 
2.39.2

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2024-06-25 00:22:15.440216439 +0100
+++ 0030-net-axgbe-fix-connection-for-SFP-active-cables.patch	2024-06-25 00:22:13.121184344 +0100
@@ -1 +1 @@
-From 4823ccdbbd887bb84339a4d35febd92292d07b97 Mon Sep 17 00:00:00 2001
+From 73e8b7893e102f3c4d01dd7b510b1c64e3e6171f Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 4823ccdbbd887bb84339a4d35febd92292d07b97 ]
+
@@ -16 +17,0 @@
-Cc: stable at dpdk.org
@@ -25 +26 @@
-index 10196cae94..d9585a7404 100644
+index 9aadbefaba..85b01bfa10 100644


More information about the stable mailing list