patch 'examples/l3fwd-power: fix uncore help and log info' has been queued to stable release 24.11.9

[luca.boccassi at gmail.com]

Hi,

FYI, your patch has been queued to stable release 24.11.9

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 10/29/26. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://github.com/bluca/dpdk-stable

This queued commit can be viewed at:
https://github.com/bluca/dpdk-stable/commit/f7ace070633c1778f96cf431f3d8dc9b61927414

Thanks.

Luca Boccassi

---
>From f7ace070633c1778f96cf431f3d8dc9b61927414 Mon Sep 17 00:00:00 2001
From: Huisong Li <lihuisong at huawei.com>
Date: Wed, 12 Aug 2026 17:49:53 +0800
Subject: [PATCH] examples/l3fwd-power: fix uncore help and log info

[ upstream commit edabba562c57107726f39753404153420f052900 ]

The '-i' parameter is to set any uncore frequency rather than
min/max value. And the error logs are not clear enough, fix it
by the way.

Fixes: 10db2a5b8724 ("examples/l3fwd-power: add options for uncore frequency")

Signed-off-by: Huisong Li <lihuisong at huawei.com>
---
 doc/guides/sample_app_ug/l3_forward_power_man.rst | 2 +-
 examples/l3fwd-power/main.c                       | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/doc/guides/sample_app_ug/l3_forward_power_man.rst b/doc/guides/sample_app_ug/l3_forward_power_man.rst
index 3271bc2154b..dc882c5d77b 100644
--- a/doc/guides/sample_app_ug/l3_forward_power_man.rst
+++ b/doc/guides/sample_app_ug/l3_forward_power_man.rst
@@ -106,7 +106,7 @@ where,
 
 *   -U: optional, sets uncore min/max frequency to maximum value.
 
-*   -i (frequency index): optional, sets uncore frequency to frequency index value, by setting min and max values to be the same.
+*   -i (frequency index): set target frequency for uncore by specified frequency index.
 
 *   --config (port,queue,lcore)[,(port,queue,lcore)]: determines which queues from which ports are mapped to which cores.
 
diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index 5c735f2883c..6637a849727 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -1499,7 +1499,7 @@ print_usage(const char *prgname)
 		"  -P: enable promiscuous mode\n"
 		"  -u: set min/max frequency for uncore to minimum value\n"
 		"  -U: set min/max frequency for uncore to maximum value\n"
-		"  -i (frequency index): set min/max frequency for uncore to specified frequency index\n"
+		"  -i (frequency index): set target frequency for uncore by specified frequency index\n"
 		"  --config (port,queue,lcore): rx queues configuration\n"
 		"  --cpu-resume-latency LATENCY: set CPU resume latency to control C-state selection,"
 		" 0 : just allow to enter C0-state\n"
@@ -1582,7 +1582,7 @@ parse_uncore_options(enum uncore_choice choice, const char *argument)
 				ret = rte_power_uncore_freq_min(pkg, die);
 				if (ret == -1) {
 					RTE_LOG(INFO, L3FWD_POWER,
-					"Unable to set the uncore min/max to minimum uncore frequency value for pkg %02u die %02u\n"
+					"Unable to set the uncore frequency to minimum value for pkg %02u die %02u\n"
 					, pkg, die);
 					return ret;
 				}
@@ -1590,7 +1590,7 @@ parse_uncore_options(enum uncore_choice choice, const char *argument)
 				ret = rte_power_uncore_freq_max(pkg, die);
 				if (ret == -1) {
 					RTE_LOG(INFO, L3FWD_POWER,
-					"Unable to set uncore min/max to maximum uncore frequency value for pkg %02u die %02u\n"
+					"Unable to set uncore frequency to maximum value for pkg %02u die %02u\n"
 					, pkg, die);
 					return ret;
 				}
@@ -1611,7 +1611,7 @@ parse_uncore_options(enum uncore_choice choice, const char *argument)
 				ret = rte_power_set_uncore_freq(pkg, die, frequency_index);
 				if (ret == -1) {
 					RTE_LOG(INFO, L3FWD_POWER,
-					"Unable to set min/max uncore index value for pkg %02u die %02u\n",
+					"Unable to set specified frequency index for pkg %02u die %02u\n",
 					pkg, die);
 					return ret;
 				}
-- 
2.47.3

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2026-10-27 11:43:58.398436869 +0000
+++ 0121-examples-l3fwd-power-fix-uncore-help-and-log-info.patch	2026-10-27 11:43:53.650063658 +0000
@@ -1 +1 @@
-From edabba562c57107726f39753404153420f052900 Mon Sep 17 00:00:00 2001
+From f7ace070633c1778f96cf431f3d8dc9b61927414 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit edabba562c57107726f39753404153420f052900 ]
+
@@ -11 +12,0 @@
-Cc: stable at dpdk.org
@@ -20 +21 @@
-index f33f3b2f94..ef3f1f1519 100644
+index 3271bc2154b..dc882c5d77b 100644
@@ -33 +34 @@
-index 3af10c629a..72d4642ea4 100644
+index 5c735f2883c..6637a849727 100644
@@ -36 +37 @@
-@@ -1497,7 +1497,7 @@ print_usage(const char *prgname)
+@@ -1499,7 +1499,7 @@ print_usage(const char *prgname)
@@ -43 +43,0 @@
- 		"  --eth-link-speed: force link speed\n"
@@ -45 +45,2 @@
-@@ -1581,7 +1581,7 @@ parse_uncore_options(enum uncore_choice choice, const char *argument)
+ 		" 0 : just allow to enter C0-state\n"
+@@ -1582,7 +1582,7 @@ parse_uncore_options(enum uncore_choice choice, const char *argument)
@@ -54 +55 @@
-@@ -1589,7 +1589,7 @@ parse_uncore_options(enum uncore_choice choice, const char *argument)
+@@ -1590,7 +1590,7 @@ parse_uncore_options(enum uncore_choice choice, const char *argument)
@@ -63 +64 @@
-@@ -1610,7 +1610,7 @@ parse_uncore_options(enum uncore_choice choice, const char *argument)
+@@ -1611,7 +1611,7 @@ parse_uncore_options(enum uncore_choice choice, const char *argument)