[dpdk-test-report] |ERROR| pw 8277 enic: improve Tx packet rate

sys_stv at intel.com sys_stv at intel.com
Sat Oct 31 05:30:26 CET 2015


Test-Label: Intel Niantic on Fedora
Test-Status: ERROR
Patchwork: http://www.dpdk.org/dev/patchwork/patch/8277/

DPDK git baseline: affc455438f4cbd3b14e2d9a24fbc154e22d68d3
Patchwork ID: 8277
http://www.dpdk.org/dev/patchwork/patch/8277/
Submitter: John Daley <johndale at cisco.com>
Date: Thu, 29 Oct 2015 11:45:16 -0700

Source Compilation:
OS: fedora
Nic: niantic
i686-native-linuxapp-gcc: compile pass
x86_64-native-linuxapp-gcc: compile pass

DTS validation: 
OS: fedora
Nic: Niantic
TestType: auto
GCC: 4
x86_64-native-linuxapp-gcc:  total 75, passed 65, failed 10.
Failed Case List:
Target: x86_64-native-linuxapp-gcc
OS: fedora
Failed DTS case: 
checksum_checking: http://dpdk.org/browse/tools/dts/tree/test_plans/pmd_test_plan.rst
packet_checking: http://dpdk.org/browse/tools/dts/tree/test_plans/pmd_test_plan.rst
whitelist_add_remove_mac_address: http://dpdk.org/browse/tools/dts/tree/test_plans/whitelist_test_plan.rst
jumboframes_jumbo_jumbo: http://dpdk.org/browse/tools/dts/tree/test_plans/jumboframes_test_plan.rst
jumboframes_normal_jumbo: http://dpdk.org/browse/tools/dts/tree/test_plans/jumboframes_test_plan.rst
jumboframes_normal_nojumbo: http://dpdk.org/browse/tools/dts/tree/test_plans/jumboframes_test_plan.rst
scatter_mbuf_2048: http://dpdk.org/browse/tools/dts/tree/test_plans/scatter_test_plan.rst
checksum_offload_disable: http://dpdk.org/browse/tools/dts/tree/test_plans/checksum_offload_test_plan.rst
checksum_offload_enable: http://dpdk.org/browse/tools/dts/tree/test_plans/checksum_offload_test_plan.rst
checksum_offload_with_vlan: http://dpdk.org/browse/tools/dts/tree/test_plans/checksum_offload_test_plan.rst

DTS Validation Error:
========================================================================================================================
========================================================================================================================
TEST SUITE : TestPmd

-------------------------------------------------------------------------------
Begin: Test Casetest_checksum_checking
--------------------------------------------------
FAILED  'packet pass assert error, expected 60 RX bytes, actual 0'
--------------------------------------------------
[   SUITE_DUT_CMD]  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1fffffffff -n 4  -- -i --coremask=0x2 --portmask=0x3 --nb-cores=2 --enable-rx-cksum --disable-hw-vlan --disable-rss --crc-strip --rxd=1024 --txd=1024 --rxfreet=0 --txqflags=0
[   SUITE_DUT_CMD]  set fwd csum
[   SUITE_DUT_CMD]  start
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
[SUITE_TESTER_CMD]  echo -n '' >  scapyResult.txt
[SUITE_TESTER_CMD]  killall scapy 2>/dev/null; echo tester
[SUITE_TESTER_CMD]  scapy
[SUITE_TESTER_CMD]  nutmac="90:e2:ba:4a:51:9d"
[SUITE_TESTER_CMD]  sendp([Ether(dst=nutmac, src="52:00:00:00:00:00")/IP(len=46)/UDP(chksum=0x0)/Raw(load="P"*18)], iface="eth1")
[SUITE_TESTER_CMD]  exit()
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
End test_checksum_checking
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Begin: Test Casetest_packet_checking
--------------------------------------------------
FAILED  'packet pass assert error, expected 64 RX bytes, actual 0'
--------------------------------------------------
[   SUITE_DUT_CMD]  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1fffffffff -n 4  -- -i --coremask=0x2 --portmask=0x3 --txqflags=0
[   SUITE_DUT_CMD]  start
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
[SUITE_TESTER_CMD]  echo -n '' >  scapyResult.txt
[SUITE_TESTER_CMD]  killall scapy 2>/dev/null; echo tester
[SUITE_TESTER_CMD]  scapy
[SUITE_TESTER_CMD]  nutmac="90:e2:ba:4a:51:9d"
[SUITE_TESTER_CMD]  sendp([Ether(dst=nutmac, src="52:00:00:00:00:00")/IP(len=46)/UDP()/Raw(load="P"*18)], iface="eth1")
[SUITE_TESTER_CMD]  exit()
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
End test_packet_checking
-------------------------------------------------------------------------------
[SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester

========================================================================================================================
========================================================================================================================
TEST SUITE : TestJumboframes
[SUITE_TESTER_CMD] ifconfig p785p1 mtu 9200
[SUITE_TESTER_CMD] ifconfig eth1 mtu 9200

-------------------------------------------------------------------------------
Begin: Test Casetest_jumboframes_jumbo_jumbo
--------------------------------------------------
FAILED  'packet pass assert error'
--------------------------------------------------
[   SUITE_DUT_CMD]  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4  -- -i --max-pkt-len=9000 --txqflags=0
[   SUITE_DUT_CMD]  start
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
[SUITE_TESTER_CMD]  echo -n '' >  scapyResult.txt
[SUITE_TESTER_CMD]  killall scapy 2>/dev/null; echo tester
[SUITE_TESTER_CMD]  scapy
[SUITE_TESTER_CMD]  nutmac="90:e2:ba:4a:51:9d"
[SUITE_TESTER_CMD]  sendp([Ether(dst=nutmac, src="52:00:00:00:00:00")/IP(len=1501)/Raw(load="P"*1481)], iface="eth1")
[SUITE_TESTER_CMD]  exit()
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
End test_jumboframes_jumbo_jumbo
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Begin: Test Casetest_jumboframes_normal_jumbo
--------------------------------------------------
FAILED  'packet pass assert error'
--------------------------------------------------
[   SUITE_DUT_CMD]  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4  -- -i --max-pkt-len=9000 --txqflags=0
[   SUITE_DUT_CMD]  start
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
[SUITE_TESTER_CMD]  echo -n '' >  scapyResult.txt
[SUITE_TESTER_CMD]  killall scapy 2>/dev/null; echo tester
[SUITE_TESTER_CMD]  scapy
[SUITE_TESTER_CMD]  nutmac="90:e2:ba:4a:51:9d"
[SUITE_TESTER_CMD]  sendp([Ether(dst=nutmac, src="52:00:00:00:00:00")/IP(len=1499)/Raw(load="P"*1479)], iface="eth1")
[SUITE_TESTER_CMD]  exit()
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
End test_jumboframes_normal_jumbo
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Begin: Test Casetest_jumboframes_normal_nojumbo
--------------------------------------------------
FAILED  'packet pass assert error'
--------------------------------------------------
[   SUITE_DUT_CMD]  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4  -- -i --max-pkt-len=1518 --txqflags=0
[   SUITE_DUT_CMD]  start
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
[SUITE_TESTER_CMD]  echo -n '' >  scapyResult.txt
[SUITE_TESTER_CMD]  killall scapy 2>/dev/null; echo tester
[SUITE_TESTER_CMD]  scapy
[SUITE_TESTER_CMD]  nutmac="90:e2:ba:4a:51:9d"
[SUITE_TESTER_CMD]  sendp([Ether(dst=nutmac, src="52:00:00:00:00:00")/IP(len=1499)/Raw(load="P"*1479)], iface="eth1")
[SUITE_TESTER_CMD]  exit()
[   SUITE_DUT_CMD]  show port stats 0
[   SUITE_DUT_CMD]  show port stats 1
End test_jumboframes_normal_nojumbo
-------------------------------------------------------------------------------
[SUITE_TESTER_CMD] ifconfig p785p1 mtu 1518
[SUITE_TESTER_CMD] ifconfig eth1 mtu 1518
[SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester

========================================================================================================================
========================================================================================================================
TEST SUITE : TestWhitelist
[SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4  -- -i --portmask=0x3 --txqflags=0
[SUITE_DUT_CMD] set verbose 1
[SUITE_DUT_CMD] start
[SUITE_DUT_CMD] show port info 0

-------------------------------------------------------------------------------
Begin: Test Casetest_whitelist_add_remove_mac_address
--------------------------------------------------
FAILED  'Packet has not been received on default address'
--------------------------------------------------
[   SUITE_DUT_CMD]  set promisc 0 off
[   SUITE_DUT_CMD]  show port stats 1
[SUITE_TESTER_CMD]  echo -n '' >  scapyResult.txt
[SUITE_TESTER_CMD]  killall scapy 2>/dev/null; echo tester
[SUITE_TESTER_CMD]  scapy
[SUITE_TESTER_CMD]  sendp([Ether(dst="90:e2:ba:4a:54:80", src="52:00:00:00:00:00")], iface="p785p1", count=1)
[SUITE_TESTER_CMD]  exit()
[   SUITE_DUT_CMD]  show port stats 1
End test_whitelist_add_remove_mac_address
-------------------------------------------------------------------------------
[   SUITE_DUT_CMD] quit
[SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester



DPDK STV team 


More information about the test-report mailing list