[dpdk-test-report] |FAILURE| pw38929 [PATCH v6 05/16] ethdev: alter behavior of flow API actions

sys_stv at intel.com sys_stv at intel.com
Tue May 8 13:32:12 CEST 2018
Previous message: [dpdk-test-report] |SUCCESS| pw39458 [PATCH v2] crypto/dpaa_sec: update maximum queue pairs to 8
Next message: [dpdk-test-report] |FAILURE| pw38928 [PATCH v6 04/16] ethdev: remove DUP action from flow API
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/38929

_apply patch file failure_

Submitter: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
Date: Wed, 25 Apr 2018 17:27:41 +0200
DPDK git baseline: Repo:dpdk-next-eventdev, Branch:master, CommitID:fcde84b5f85b3c1a5d5564299fd49c58ca20370d
                   Repo:dpdk-next-crypto, Branch:master, CommitID:9e3a32fcd3d10866fcd2519be3d577e557a6719c
                   Repo:dpdk-next-net, Branch:master, CommitID:29f4ab844cdb61d7241f7241fe860779516b9012
                   Repo:dpdk-next-virtio, Branch:master, CommitID:037c0996bc927342f157426739e0cb63f2db8689
                   Repo:dpdk, Branch:master, CommitID:e2077a158e22451144d1b023f949f3232cfa62b3
                   
Apply patch file failed:
Repo: dpdk
38929:
patching file doc/guides/prog_guide/rte_flow.rst
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
13 out of 13 hunks ignored -- saving rejects to file doc/guides/prog_guide/rte_flow.rst.rej
patching file doc/guides/rel_notes/release_18_05.rst
Hunk #1 succeeded at 172 with fuzz 2 (offset -71 lines).
Hunk #2 succeeded at 326 with fuzz 1 (offset 28 lines).
patching file drivers/net/enic/enic_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
9 out of 9 hunks ignored -- saving rejects to file drivers/net/enic/enic_flow.c.rej
patching file drivers/net/mlx4/mlx4_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
5 out of 5 hunks ignored -- saving rejects to file drivers/net/mlx4/mlx4_flow.c.rej
patching file drivers/net/mlx5/mlx5_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
7 out of 7 hunks ignored -- saving rejects to file drivers/net/mlx5/mlx5_flow.c.rej
patching file drivers/net/sfc/sfc_flow.c
Hunk #1 FAILED at 1467.
Hunk #2 FAILED at 1512.
2 out of 2 hunks FAILED -- saving rejects to file drivers/net/sfc/sfc_flow.c.rej
patching file drivers/net/tap/tap_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
2 out of 2 hunks ignored -- saving rejects to file drivers/net/tap/tap_flow.c.rej
can't find file to patch at input line 581
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
|index 6ace24ff4..96184f030 100644
|--- a/lib/librte_ether/rte_flow.h
|+++ b/lib/librte_ether/rte_flow.h
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
10 out of 10 hunks ignored

Repo: dpdk-next-crypto
38929:
patching file doc/guides/prog_guide/rte_flow.rst
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
13 out of 13 hunks ignored -- saving rejects to file doc/guides/prog_guide/rte_flow.rst.rej
patching file doc/guides/rel_notes/release_18_05.rst
Hunk #1 succeeded at 310 with fuzz 2 (offset 67 lines).
Hunk #2 FAILED at 298.
1 out of 2 hunks FAILED -- saving rejects to file doc/guides/rel_notes/release_18_05.rst.rej
patching file drivers/net/enic/enic_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
9 out of 9 hunks ignored -- saving rejects to file drivers/net/enic/enic_flow.c.rej
patching file drivers/net/mlx4/mlx4_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
5 out of 5 hunks ignored -- saving rejects to file drivers/net/mlx4/mlx4_flow.c.rej
patching file drivers/net/mlx5/mlx5_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
7 out of 7 hunks ignored -- saving rejects to file drivers/net/mlx5/mlx5_flow.c.rej
patching file drivers/net/sfc/sfc_flow.c
Hunk #1 FAILED at 1467.
Hunk #2 FAILED at 1512.
2 out of 2 hunks FAILED -- saving rejects to file drivers/net/sfc/sfc_flow.c.rej
patching file drivers/net/tap/tap_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
2 out of 2 hunks ignored -- saving rejects to file drivers/net/tap/tap_flow.c.rej
can't find file to patch at input line 581
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
|index 6ace24ff4..96184f030 100644
|--- a/lib/librte_ether/rte_flow.h
|+++ b/lib/librte_ether/rte_flow.h
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
10 out of 10 hunks ignored

Repo: dpdk-next-net
38929:
patching file doc/guides/prog_guide/rte_flow.rst
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
13 out of 13 hunks ignored -- saving rejects to file doc/guides/prog_guide/rte_flow.rst.rej
patching file doc/guides/rel_notes/release_18_05.rst
Hunk #1 succeeded at 310 with fuzz 2 (offset 67 lines).
Hunk #2 FAILED at 298.
1 out of 2 hunks FAILED -- saving rejects to file doc/guides/rel_notes/release_18_05.rst.rej
patching file drivers/net/enic/enic_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
9 out of 9 hunks ignored -- saving rejects to file drivers/net/enic/enic_flow.c.rej
patching file drivers/net/mlx4/mlx4_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
5 out of 5 hunks ignored -- saving rejects to file drivers/net/mlx4/mlx4_flow.c.rej
patching file drivers/net/mlx5/mlx5_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
7 out of 7 hunks ignored -- saving rejects to file drivers/net/mlx5/mlx5_flow.c.rej
patching file drivers/net/sfc/sfc_flow.c
Hunk #1 FAILED at 1467.
Hunk #2 FAILED at 1512.
2 out of 2 hunks FAILED -- saving rejects to file drivers/net/sfc/sfc_flow.c.rej
patching file drivers/net/tap/tap_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
2 out of 2 hunks ignored -- saving rejects to file drivers/net/tap/tap_flow.c.rej
can't find file to patch at input line 581
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
|index 6ace24ff4..96184f030 100644
|--- a/lib/librte_ether/rte_flow.h
|+++ b/lib/librte_ether/rte_flow.h
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
10 out of 10 hunks ignored

Repo: dpdk-next-virtio
38929:
patching file doc/guides/prog_guide/rte_flow.rst
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
13 out of 13 hunks ignored -- saving rejects to file doc/guides/prog_guide/rte_flow.rst.rej
patching file doc/guides/rel_notes/release_18_05.rst
Hunk #1 succeeded at 310 with fuzz 2 (offset 67 lines).
Hunk #2 FAILED at 298.
1 out of 2 hunks FAILED -- saving rejects to file doc/guides/rel_notes/release_18_05.rst.rej
patching file drivers/net/enic/enic_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
9 out of 9 hunks ignored -- saving rejects to file drivers/net/enic/enic_flow.c.rej
patching file drivers/net/mlx4/mlx4_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
5 out of 5 hunks ignored -- saving rejects to file drivers/net/mlx4/mlx4_flow.c.rej
patching file drivers/net/mlx5/mlx5_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
7 out of 7 hunks ignored -- saving rejects to file drivers/net/mlx5/mlx5_flow.c.rej
patching file drivers/net/sfc/sfc_flow.c
Hunk #1 FAILED at 1467.
Hunk #2 FAILED at 1512.
2 out of 2 hunks FAILED -- saving rejects to file drivers/net/sfc/sfc_flow.c.rej
patching file drivers/net/tap/tap_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
2 out of 2 hunks ignored -- saving rejects to file drivers/net/tap/tap_flow.c.rej
can't find file to patch at input line 581
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
|index 6ace24ff4..96184f030 100644
|--- a/lib/librte_ether/rte_flow.h
|+++ b/lib/librte_ether/rte_flow.h
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
10 out of 10 hunks ignored

Repo: dpdk-next-eventdev
38929:
patching file doc/guides/prog_guide/rte_flow.rst
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
13 out of 13 hunks ignored -- saving rejects to file doc/guides/prog_guide/rte_flow.rst.rej
patching file doc/guides/rel_notes/release_18_05.rst
Hunk #1 succeeded at 310 with fuzz 2 (offset 67 lines).
Hunk #2 FAILED at 298.
1 out of 2 hunks FAILED -- saving rejects to file doc/guides/rel_notes/release_18_05.rst.rej
patching file drivers/net/enic/enic_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
9 out of 9 hunks ignored -- saving rejects to file drivers/net/enic/enic_flow.c.rej
patching file drivers/net/mlx4/mlx4_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
5 out of 5 hunks ignored -- saving rejects to file drivers/net/mlx4/mlx4_flow.c.rej
patching file drivers/net/mlx5/mlx5_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
7 out of 7 hunks ignored -- saving rejects to file drivers/net/mlx5/mlx5_flow.c.rej
patching file drivers/net/sfc/sfc_flow.c
Hunk #1 FAILED at 1467.
Hunk #2 FAILED at 1512.
2 out of 2 hunks FAILED -- saving rejects to file drivers/net/sfc/sfc_flow.c.rej
patching file drivers/net/tap/tap_flow.c
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
2 out of 2 hunks ignored -- saving rejects to file drivers/net/tap/tap_flow.c.rej
can't find file to patch at input line 581
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
|index 6ace24ff4..96184f030 100644
|--- a/lib/librte_ether/rte_flow.h
|+++ b/lib/librte_ether/rte_flow.h
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
10 out of 10 hunks ignored


DPDK STV team
Previous message: [dpdk-test-report] |SUCCESS| pw39458 [PATCH v2] crypto/dpaa_sec: update maximum queue pairs to 8
Next message: [dpdk-test-report] |FAILURE| pw38928 [PATCH v6 04/16] ethdev: remove DUP action from flow API
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the test-report mailing list