[dpdk-test-report] |FAILURE| pw36038[dpdk-dev, RESEND, v2, 3/7] net/dpaa2: change into dynamic logging

sys_stv at intel.com sys_stv at intel.com
Thu May 10 09:53:13 CEST 2018 

Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/36038

_apply issues_

Submitter: Shreyansh Jain <shreyansh.jain at nxp.com>
Date: 2018-03-13 05:44:27
DPDK git baseline:
	Repo:dpdk-master, CommitID: 8ea41438832a360aed2b7ba49fb75e310a2ff1dc
	Repo:dpdk-next-eventdev, CommitID: 640b0d1e510e111694c25145466f37867453837f
	Repo:dpdk-next-net, CommitID: 774c1892c434dba09998ccc76b956feb72224571
	Repo:dpdk-next-crypto, CommitID: 728ca9b0d5abea82cd01dee6645456a9d56215f7
	Repo:dpdk-next-virtio, CommitID: 037c0996bc927342f157426739e0cb63f2db8689

*Repo: dpdk-master
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n

#
# Compile burst-oriented Amazon ENA PMD driver

error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

#
# Compile burst-oriented NXP DPAA2 PMD driver
--

#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#

error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
  By default it is enabled only for defconfig_arm64-dpaa2-* config.
  Toggle compilation of the ``librte_pmd_dpaa2`` driver.

- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)

--

Driver compilation and testing
------------------------------


error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a

ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif

CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc

error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>

#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>


error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>

#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>

error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>

#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--

#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"


error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply
*Repo: dpdk-next-eventdev
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n

#
# Compile burst-oriented Amazon ENA PMD driver

error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

#
# Compile burst-oriented NXP DPAA2 PMD driver
--

#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#

error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
  By default it is enabled only for defconfig_arm64-dpaa2-* config.
  Toggle compilation of the ``librte_pmd_dpaa2`` driver.

- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)

--

Driver compilation and testing
------------------------------


error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a

ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif

CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc

error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>

#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>


error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>

#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>

error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>

#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--

#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"


error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply
*Repo: dpdk-next-net
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n

#
# Compile burst-oriented Amazon ENA PMD driver

error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

#
# Compile burst-oriented NXP DPAA2 PMD driver
--

#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#

error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
  By default it is enabled only for defconfig_arm64-dpaa2-* config.
  Toggle compilation of the ``librte_pmd_dpaa2`` driver.

- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)

--

Driver compilation and testing
------------------------------


error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a

ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif

CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc

error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>

#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>


error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>

#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>

error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>

#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--

#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"


error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply
*Repo: dpdk-next-crypto
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n

#
# Compile burst-oriented Amazon ENA PMD driver

error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

#
# Compile burst-oriented NXP DPAA2 PMD driver
--

#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#

error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
  By default it is enabled only for defconfig_arm64-dpaa2-* config.
  Toggle compilation of the ``librte_pmd_dpaa2`` driver.

- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)

--

Driver compilation and testing
------------------------------


error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a

ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif

CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc

error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>

#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>


error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>

#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>

error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>

#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--

#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"


error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply
*Repo: dpdk-next-virtio
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n

#
# Compile burst-oriented Amazon ENA PMD driver

error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n

#
# Compile burst-oriented NXP DPAA2 PMD driver
--

#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#

error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
  By default it is enabled only for defconfig_arm64-dpaa2-* config.
  Toggle compilation of the ``librte_pmd_dpaa2`` driver.

- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)

--

Driver compilation and testing
------------------------------


error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a

ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif

CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc

error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>

#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>


error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>

#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>

error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>

#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--

#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"


error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply

DPDK STV team

More information about the test-report mailing list