[dpdk-test-report] |FAILURE| pw39857[dpdk-dev, 2/5] crypto/qat: move to dynamic logging for non-dp trace

sys_stv at intel.com sys_stv at intel.com
Mon May 14 04:03:22 CEST 2018
Previous message: [dpdk-test-report] |FAILURE| pw39856[dpdk-dev, 1/5] crypto/qat: cleanup unused and useless trace
Next message: [dpdk-test-report] |FAILURE| pw39858[dpdk-dev, 3/5] crypto/qat: rename log macro for non-dp logs
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/39857

_apply issues_

Submitter: Fiona Trahe <fiona.trahe at intel.com>
Date: 2018-05-11 11:31:45
DPDK git baseline:
	Repo:dpdk-master, CommitID: b8b8b344cb44bea46ac1d2037e8e5f1e742319f6
	Repo:dpdk-next-eventdev, CommitID: 3c955492b601d65402c02ac81dfdc7eeb62f23c9
	Repo:dpdk-next-net, CommitID: dc33238da4be9cf69e44049cd44950fb4fe74e3b
	Repo:dpdk-next-crypto, CommitID: e0d88a394e91f446234aa04d0f9e01c150b0d347
	Repo:dpdk-next-virtio, CommitID: 037c0996bc927342f157426739e0cb63f2db8689

*Repo: dpdk-master
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#

error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c

error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
		'qat_qp.c',
		'qat_device.c',
		'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
		'qat_asym_pmd.c',
		'qat_comp_pmd.c')

error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_

#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
	PMD_DRV_LOG_RAW(level, fmt "\n", ## args)

#endif /* _QAT_LOGS_H_ */

error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply
*Repo: dpdk-next-eventdev
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#

error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c

error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
		'qat_qp.c',
		'qat_device.c',
		'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
		'qat_asym_pmd.c',
		'qat_comp_pmd.c')

error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_

#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
	PMD_DRV_LOG_RAW(level, fmt "\n", ## args)

#endif /* _QAT_LOGS_H_ */

error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply
*Repo: dpdk-next-net
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#

error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c

error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
		'qat_qp.c',
		'qat_device.c',
		'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
		'qat_asym_pmd.c',
		'qat_comp_pmd.c')

error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_

#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
	PMD_DRV_LOG_RAW(level, fmt "\n", ## args)

#endif /* _QAT_LOGS_H_ */

error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply
*Repo: dpdk-next-crypto
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#

error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c

error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
		'qat_qp.c',
		'qat_device.c',
		'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
		'qat_asym_pmd.c',
		'qat_comp_pmd.c')

error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_

#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
	PMD_DRV_LOG_RAW(level, fmt "\n", ## args)

#endif /* _QAT_LOGS_H_ */

error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply
*Repo: dpdk-next-virtio
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#

error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c

error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
		'qat_qp.c',
		'qat_device.c',
		'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
		'qat_asym_pmd.c',
		'qat_comp_pmd.c')

error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_

#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
	PMD_DRV_LOG_RAW(level, fmt "\n", ## args)

#endif /* _QAT_LOGS_H_ */

error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply

DPDK STV team
Previous message: [dpdk-test-report] |FAILURE| pw39856[dpdk-dev, 1/5] crypto/qat: cleanup unused and useless trace
Next message: [dpdk-test-report] |FAILURE| pw39858[dpdk-dev, 3/5] crypto/qat: rename log macro for non-dp logs
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the test-report mailing list