|SUCCESS|dpdk-next-net-intel|808d8be47b| intel-Functional
sys_stv at intel.com
sys_stv at intel.com
Wed Jul 1 15:38:02 CEST 2026
Test-Label: intel-Functional
Test-Status: SUCCESS
_Functional PASS_
DPDK git repo: dpdk-next-net-intel
commit 73d1936fbc7b6db5af48aceb5f18d8d4b0761900
Author: Marek Kasiewicz <marek.kasiewicz at intel.com>
Date: Tue Jun 30 08:06:53 2026 -0400
net/ice: add scheduler rate-limiter burst size devarg
The E810 Tx scheduler uses a token bucket algorithm where the burst
size controls the maximum bytes sent in a single burst before the
rate limiter throttles. The hardware default of 15 KB allows
micro-bursts of ~10 max-size frames, which violates tight
inter-packet spacing requirements in time-sensitive networking
applications such as SMPTE ST 2110-21 narrow-sender compliance.
Add a "rl_burst_size" device argument that lets the application lower
the scheduler rate-limiter burst size (for example to 2 KB) to force
near-constant-rate output matching the configured shaper profile.
The burst size is a global scheduler resource, so the override is
applied once at probe time and only when the user explicitly requests
it; the hardware default is left unchanged otherwise.
Signed-off-by: Marek Kasiewicz <marek.kasiewicz at intel.com>
Signed-off-by: Dawid Wesierski <dawid.wesierski at intel.com>
Acked-by: Bruce Richardson <bruce.richardson at intel.com>
Smoke-Testing Summary : 31 Case Done, 31 Successful, 0 Failures
OS : Ubuntu 24.04.4 LTS
Kernel : 6.8.0-71-generic
GCC : 13.3.0-6ubuntu2~24.04.1
NIC : Ethernet Controller XL710 for 40GbE QSFP+
Target : x86_64-native-linuxapp-gcc
Test result details:
+-----------------+---------------------------------------------------+-------+
| suite | case | status|
+-----------------+---------------------------------------------------+-------+
| checksum_offload| test_do_not_insert_checksum_on_the_transmit_packet| passed|
| checksum_offload| test_hardware_checksum_check_ip_rx | passed|
| checksum_offload| test_hardware_checksum_check_ip_tx | passed|
| checksum_offload| test_hardware_checksum_check_l4_rx | passed|
| checksum_offload| test_hardware_checksum_check_l4_tx | passed|
| checksum_offload| test_insert_checksum_on_the_transmit_packet | passed|
| checksum_offload| test_rx_checksum_valid_flags | passed|
| checksum_offload| test_checksum_offload_with_vlan | n/a |
| dual_vlan | test_dual_vlan_priority_rxtx | passed|
| dual_vlan | test_vlan_filter_config | passed|
| dual_vlan | test_vlan_filter_table | passed|
| dual_vlan | test_vlan_insert_config | passed|
| dual_vlan | test_vlan_random_test | passed|
| dual_vlan | test_vlan_strip_config | passed|
| dual_vlan | test_vlan_synthetic_test | passed|
| dual_vlan | test_vlan_tpid_config | passed|
| dual_vlan | test_vlan_stripq_config | n/a |
| jumboframes | test_jumboframes_bigger_jumbo | passed|
| jumboframes | test_jumboframes_jumbo_jumbo | passed|
| jumboframes | test_jumboframes_jumbo_nojumbo | passed|
| jumboframes | test_jumboframes_normal_jumbo | passed|
| jumboframes | test_jumboframes_normal_nojumbo | passed|
| rxtx_offload | test_rxoffload_port_all | passed|
| rxtx_offload | test_rxoffload_port_cmdline | passed|
| rxtx_offload | test_txoffload_port | passed|
| rxtx_offload | test_txoffload_port_all | passed|
| rxtx_offload | test_txoffload_port_checksum | passed|
| rxtx_offload | test_txoffload_port_cmdline | passed|
| rxtx_offload | test_txoffload_port_multi_segs | passed|
| rxtx_offload | test_txoffload_queue | passed|
| rxtx_offload | test_rxoffload_queue | n/a |
+-----------------+---------------------------------------------------+-------+
DPDK STV team
More information about the test-report
mailing list