|SUCCESS|dpdk|f9767f70cb| intel-Functional
sys_stv at intel.com
sys_stv at intel.com
Tue Mar 10 23:36:50 CET 2026
Test-Label: intel-Functional
Test-Status: SUCCESS
_Functional PASS_
DPDK git repo: dpdk
commit f9767f70cb73429739954491d532951de1ba0165
Author: Grzegorz Nitka <grzegorz.nitka at intel.com>
Date: Tue Mar 10 05:52:18 2026 -0400
net/ice/base: fix adjust timer programming for E830
Fix incorrect 'adjust the timer' programming sequence for E830 devices
series. Only shadow registers GLTSYN_SHADJ were programmed in the current
implementation. According to the specification [1], write to command
GLTSYN_CMD register is also required with CMD field set to "Adjust the
Time" value, for the timer adjustment to take the effect.
The flow was broken for the adjustment less than S32_MAX/MIN range
(around +/- 2 seconds). For bigger adjustment, non-atomic programming
flow is used, involving set timer programming. Non-atomic flow is
implemented correctly.
Fixes: 881169950d80 ("net/ice/base: implement initial PTP support for E830")
Cc: stable at dpdk.org
Signed-off-by: Soumyadeep Hore <soumyadeep.hore at intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka at intel.com>
Acked-by: Bruce Richardson <bruce.richardson at intel.com>
Smoke-Testing Summary : 31 Case Done, 31 Successful, 0 Failures
OS : Ubuntu 24.04.3 LTS
Kernel : 6.8.0-71-generic
GCC : 13.3.0-6ubuntu2~24.04
NIC : Ethernet Controller XL710 for 40GbE QSFP+
Target : x86_64-native-linuxapp-gcc
Test result details:
+-----------------+---------------------------------------------------+-------+
| suite | case | status|
+-----------------+---------------------------------------------------+-------+
| checksum_offload| test_do_not_insert_checksum_on_the_transmit_packet| passed|
| checksum_offload| test_hardware_checksum_check_ip_rx | passed|
| checksum_offload| test_hardware_checksum_check_ip_tx | passed|
| checksum_offload| test_hardware_checksum_check_l4_rx | passed|
| checksum_offload| test_hardware_checksum_check_l4_tx | passed|
| checksum_offload| test_insert_checksum_on_the_transmit_packet | passed|
| checksum_offload| test_rx_checksum_valid_flags | passed|
| checksum_offload| test_checksum_offload_with_vlan | n/a |
| dual_vlan | test_dual_vlan_priority_rxtx | passed|
| dual_vlan | test_vlan_filter_config | passed|
| dual_vlan | test_vlan_filter_table | passed|
| dual_vlan | test_vlan_insert_config | passed|
| dual_vlan | test_vlan_random_test | passed|
| dual_vlan | test_vlan_strip_config | passed|
| dual_vlan | test_vlan_synthetic_test | passed|
| dual_vlan | test_vlan_tpid_config | passed|
| dual_vlan | test_vlan_stripq_config | n/a |
| jumboframes | test_jumboframes_bigger_jumbo | passed|
| jumboframes | test_jumboframes_jumbo_jumbo | passed|
| jumboframes | test_jumboframes_jumbo_nojumbo | passed|
| jumboframes | test_jumboframes_normal_jumbo | passed|
| jumboframes | test_jumboframes_normal_nojumbo | passed|
| rxtx_offload | test_rxoffload_port_all | passed|
| rxtx_offload | test_rxoffload_port_cmdline | passed|
| rxtx_offload | test_txoffload_port | passed|
| rxtx_offload | test_txoffload_port_all | passed|
| rxtx_offload | test_txoffload_port_checksum | passed|
| rxtx_offload | test_txoffload_port_cmdline | passed|
| rxtx_offload | test_txoffload_port_multi_segs | passed|
| rxtx_offload | test_txoffload_queue | passed|
| rxtx_offload | test_rxoffload_queue | n/a |
+-----------------+---------------------------------------------------+-------+
DPDK STV team
More information about the test-report
mailing list