|FAILURE| pw169139 [RFC PATCH] mempool: no cache size limit
qemudev at loongson.cn
qemudev at loongson.cn
Mon Sep 7 14:36:25 CEST 2026
Test-Label: loongson-unit-loongarch-abi2
Test-Status: FAILURE
http://dpdk.org/patch/169139
_Unit Testing FAIL_
Submitter: Morten Brørup <mb at smartsharesystems.com>
Date: Mon, 7 Sep 2026 12:06:05 +0000
DPDK git baseline: Repo:dpdk
Branch: main
CommitID: d55ccd4e6de64e3f797f60de9e81f1d60f849775
169139 --> testing fail
Test environment and result as below:
+---------------------+----------------+
| Environment | dpdk_unit_test |
+---------------------+----------------+
| Loongnix-Server 23.2 | FAIL |
+---------------------+----------------+
Loongnix-Server 23.2
Kernel: 6.6.52-1.10.lns23.loongarch64
Compiler: gcc 12.3
Test result details:
1/114 DPDK:fast-tests / acl_autotest OK 2.60s
2/114 DPDK:fast-tests / alarm_autotest OK 1.21s
3/114 DPDK:fast-tests / argparse_autotest OK 0.32s
4/114 DPDK:fast-tests / bitcount_autotest OK 0.31s
5/114 DPDK:fast-tests / bitmap_autotest OK 0.15s
6/114 DPDK:fast-tests / bitops_autotest OK 1.80s
7/114 DPDK:fast-tests / bitset_autotest OK 4.10s
8/114 DPDK:fast-tests / bitratestats_autotest FAIL 3.80s exit status -11
9/114 DPDK:fast-tests / bpf_no_instructions_autotest OK 0.30s
10/114 DPDK:fast-tests / bpf_exit_only_autotest OK 0.30s
11/114 DPDK:fast-tests / bpf_no_exit_autotest OK 0.30s
12/114 DPDK:fast-tests / bpf_minimal_working_autotest OK 0.30s
13/114 DPDK:fast-tests / bpf_add_one_autotest OK 0.16s
14/114 DPDK:fast-tests / bpf_subtract_one_autotest OK 0.30s
15/114 DPDK:fast-tests / bpf_jump_over_invalid_first_autotest OK 0.30s
16/114 DPDK:fast-tests / bpf_jump_over_invalid_non_first_autotest OK 0.30s
17/114 DPDK:fast-tests / bpf_load_null_autotest OK 0.30s
18/114 DPDK:fast-tests / bpf_exec_wrong_nb_prog_arg_autotest OK 0.30s
19/114 DPDK:fast-tests / bpf_exec_wrong_flags_autotest OK 0.30s
20/114 DPDK:fast-tests / bpf_autotest OK 0.30s
21/114 DPDK:fast-tests / bpf_stack_alignment_autotest SKIP 0.30s exit status 77
22/114 DPDK:fast-tests / bpf_stack_copy_uint128_autotest SKIP 0.32s exit status 77
23/114 DPDK:fast-tests / bpf_stack_sse2_autotest SKIP 0.30s exit status 77
24/114 DPDK:fast-tests / bpf_stack_memcpy_autotest SKIP 0.31s exit status 77
25/114 DPDK:fast-tests / bpf_elf_autotest SKIP 0.28s exit status 77
26/114 DPDK:fast-tests / bpf_convert_autotest OK 0.32s
27/114 DPDK:fast-tests / bpf_xadd32_autotest OK 0.33s
28/114 DPDK:fast-tests / bpf_xadd64_autotest OK 0.33s
29/114 DPDK:fast-tests / bpf_xchg32_autotest OK 0.31s
30/114 DPDK:fast-tests / bpf_xchg64_autotest OK 0.30s
31/114 DPDK:fast-tests / bpf_atomic_imms_autotest OK 0.31s
32/114 DPDK:fast-tests / bpf_validate_autotest OK 0.32s
33/114 DPDK:fast-tests / byteorder_autotest OK 0.32s
34/114 DPDK:fast-tests / cfgfile_autotest OK 0.33s
35/114 DPDK:fast-tests / cksum_autotest OK 0.31s
36/114 DPDK:fast-tests / cmdline_autotest OK 0.30s
37/114 DPDK:fast-tests / common_autotest OK 0.78s
38/114 DPDK:fast-tests / cpuflags_autotest OK 0.32s
39/114 DPDK:fast-tests / crc_autotest OK 0.30s
40/114 DPDK:fast-tests / user_delay_us OK 0.30s
41/114 DPDK:fast-tests / debug_autotest OK 1.12s
42/114 DPDK:fast-tests / devargs_autotest OK 0.32s
43/114 DPDK:fast-tests / eal_fs_autotest OK 0.30s
44/114 DPDK:fast-tests / errno_autotest OK 0.30s
45/114 DPDK:fast-tests / ethdev_link_status OK 0.30s
46/114 DPDK:fast-tests / event_ring_autotest OK 0.30s
47/114 DPDK:fast-tests / eventdev_common_autotest OK 0.33s
48/114 DPDK:fast-tests / eventdev_selftest_sw FAIL 3.89s exit status -11
49/114 DPDK:fast-tests / fbarray_autotest OK 0.31s
50/114 DPDK:fast-tests / fib_autotest OK 1.05s
51/114 DPDK:fast-tests / fib6_autotest OK 1.07s
52/114 DPDK:fast-tests / graph_autotest OK 0.31s
53/114 DPDK:fast-tests / node_list_dump OK 0.29s
54/114 DPDK:fast-tests / graph_feature_arc_autotest OK 0.30s
55/114 DPDK:fast-tests / hash_autotest OK 0.96s
56/114 DPDK:fast-tests / interrupt_autotest OK 1.50s
57/114 DPDK:fast-tests / ipsec_autotest SKIP 0.29s exit status 77
58/114 DPDK:fast-tests / ipsec_sad_autotest OK 0.66s
59/114 DPDK:fast-tests / kvargs_autotest OK 0.30s
60/114 DPDK:fast-tests / latencystats_autotest FAIL 3.85s exit status -11
61/114 DPDK:fast-tests / lcore_var_autotest OK 0.44s
62/114 DPDK:fast-tests / lcores_autotest OK 0.41s
63/114 DPDK:fast-tests / logs_autotest OK 0.30s
64/114 DPDK:fast-tests / lpm_autotest OK 2.06s
65/114 DPDK:fast-tests / lpm6_autotest OK 5.34s
66/114 DPDK:fast-tests / member_autotest OK 1.77s
67/114 DPDK:fast-tests / memcpy_autotest OK 0.73s
68/114 DPDK:fast-tests / meter_autotest OK 0.31s
69/114 DPDK:fast-tests / metrics_autotest OK 0.31s
70/114 DPDK:fast-tests / net_ether_autotest OK 0.84s
71/114 DPDK:fast-tests / net_ipv6_autotest OK 0.30s
72/114 DPDK:fast-tests / pcapng_autotest OK 3.91s
73/114 DPDK:fast-tests / pdump_autotest OK 0.30s
74/114 DPDK:fast-tests / per_lcore_autotest OK 0.42s
75/114 DPDK:fast-tests / pflock_autotest OK 1.04s
76/114 DPDK:fast-tests / pie_autotest OK 0.16s
77/114 DPDK:fast-tests / af_packet_pmd_autotest OK 0.32s
78/114 DPDK:fast-tests / pcap_pmd_autotest FAIL 3.80s exit status -11
79/114 DPDK:fast-tests / ring_pmd_autotest OK 0.30s
80/114 DPDK:fast-tests / tap_pmd_autotest SKIP 0.30s exit status 77
81/114 DPDK:fast-tests / power_autotest OK 0.30s
82/114 DPDK:fast-tests / power_caps_autotest SKIP 0.30s exit status 77
83/114 DPDK:fast-tests / power_intel_uncore_autotest SKIP 0.29s exit status 77
84/114 DPDK:fast-tests / prefetch_autotest OK 0.31s
85/114 DPDK:fast-tests / ptr_compress_autotest OK 0.30s
86/114 DPDK:fast-tests / rawdev_autotest OK 0.30s
87/114 DPDK:fast-tests / rcu_qsbr_autotest OK 0.64s
88/114 DPDK:fast-tests / reassembly_autotest OK 0.31s
89/114 DPDK:fast-tests / reorder_autotest FAIL 3.84s exit status -11
90/114 DPDK:fast-tests / rib_autotest OK 10.32s
91/114 DPDK:fast-tests / rib6_autotest OK 10.31s
92/114 DPDK:fast-tests / ring_autotest OK 0.32s
93/114 DPDK:fast-tests / rwlock_test1_autotest OK 1.03s
94/114 DPDK:fast-tests / rwlock_rda_autotest OK 5.21s
95/114 DPDK:fast-tests / rwlock_rds_wrm_autotest OK 5.30s
96/114 DPDK:fast-tests / rwlock_rde_wro_autotest OK 5.21s
97/114 DPDK:fast-tests / sched_autotest OK 0.30s
98/114 DPDK:fast-tests / seqlock_autotest OK 2.30s
99/114 DPDK:fast-tests / service_autotest OK 2.87s
100/114 DPDK:fast-tests / soring_autotest OK 0.24s
101/114 DPDK:fast-tests / spinlock_autotest OK 0.39s
102/114 DPDK:fast-tests / string_autotest OK 0.30s
103/114 DPDK:fast-tests / table_autotest FAIL 3.86s exit status -11
104/114 DPDK:fast-tests / tailq_autotest OK 0.30s
105/114 DPDK:fast-tests / telemetry_data_autotest OK 0.30s
106/114 DPDK:fast-tests / telemetry_json_autotest OK 0.32s
107/114 DPDK:fast-tests / thash_autotest OK 0.31s
108/114 DPDK:fast-tests / threads_autotest OK 0.24s
109/114 DPDK:fast-tests / ticketlock_autotest OK 0.39s
110/114 DPDK:fast-tests / trace_autotest OK 0.30s
111/114 DPDK:fast-tests / trace_autotest_with_traces OK 0.31s
112/114 DPDK:fast-tests / vdev_autotest OK 0.30s
113/114 DPDK:fast-tests / version_autotest OK 0.30s
114/114 DPDK:fast-tests / telemetry_all OK 18.44s
Ok: 99
Expected Fail: 0
Fail: 6
Unexpected Pass: 0
Skipped: 9
Timeout: 0
Test logs for failed test cases:
================================================================================
DPDK:fast-tests / bitratestats_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>bitratestats_autotest
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /run/user/1000/dpdk/bitratestats_autotest/mp_socket
EAL: Selected IOVA mode 'VA'
APP: HPET is not enabled, using TSC as default timer
ETHDEV: Invalid port_id=33
ETHDEV: Invalid port_id=65535
ETHDEV: Invalid port_id=31
EAL: Error: Invalid memory
================================================================================
DPDK:fast-tests / eventdev_selftest_sw: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eventdev_selftest_sw
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /run/user/1000/dpdk/eventdev_selftest_sw/mp_socket
EAL: Selected IOVA mode 'VA'
APP: HPET is not enabled, using TSC as default timer
================================================================================
DPDK:fast-tests / latencystats_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>latencystats_autotest
+ ------------------------------------------------------- +
+ Test Suite : Latency Stats Unit Test Suite
+ ------------------------------------------------------- +
+ TestCase [ 0] : test_latency_init succeeded
min_latency_ns
avg_latency_ns
max_latency_ns
jitter_ns
samples
+ TestCase [ 1] : test_latencystats_get_names succeeded
+ TestCase [ 2] : test_latencystats_get succeeded
min_latency_ns = 80
avg_latency_ns = 2775495
max_latency_ns = 2779110
jitter_ns = 773
samples = 99945
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /run/user/1000/dpdk/latencystats_autotest/mp_socket
EAL: Selected IOVA mode 'VA'
APP: HPET is not enabled, using TSC as default timer
EAL: Error: Invalid memory
================================================================================
DPDK:fast-tests / pcap_pmd_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>pcap_pmd_autotest
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /run/user/1000/dpdk/pcap_pmd_autotest/mp_socket
EAL: Selected IOVA mode 'VA'
APP: HPET is not enabled, using TSC as default timer
EAL: Test assert test_tx_to_file line 895 failed: Failed to allocate mbufs
ETH_PCAP: open_single_rx_pcap(): Couldn't open /tmp/pcap_tx_nlDXpZ.pcap: truncated dump file; tried to read 4 file header bytes, only got 0
EAL: Test assert create_pcap_vdev line 571 failed: Failed to create vdev net_pcap_rx: Operation not permitted
EAL: Test assert test_rx_from_file line 940 failed: Failed to create RX vdev
================================================================================
DPDK:fast-tests / reorder_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>reorder_autotest
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /run/user/1000/dpdk/reorder_autotest/mp_socket
EAL: Selected IOVA mode 'VA'
APP: HPET is not enabled, using TSC as default timer
REORDER: Invalid reorder buffer name ptr: NULL
REORDER: Invalid reorder buffer size - Not a power of 2
REORDER: Invalid reorder buffer parameter: NULL
REORDER: Invalid reorder buffer memory size: 262335, minimum required: 262336
REORDER: Invalid reorder buffer size - Not a power of 2
REORDER: Invalid reorder buffer parameter: NULL
================================================================================
DPDK:fast-tests / table_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>table_autotest
Getting/Creating the mempool ...
************Pipeline tests************
Added default entry to table id 0 with action 0
Added default entry to table id 1 with action 0
Pipeline Consistency OK!
Got no objects from ring 0 - error code 0
Got no objects from ring 1 - error code 0
Added default entry to table id 0 with action 1
Added default entry to table id 1 with action 1
Pipeline Consistency OK!
Got 2 object(s) from ring 0!
Object: at [0x80], len=0
Object: at [0x80], len=0
Got 2 object(s) from ring 1!
Object: at [0x80], len=0
Object: at [0x80], len=0
Added default entry to table id 0 with action 1
Added default entry to table id 1 with action 1
Pipeline Consistency OK!
STUB Table Action Miss - setting mask to 0x1
STUB Table Action Miss - setting mask to 0x1
Got 1 object(s) from ring 0!
Object: at [0x80], len=0
Got 1 object(s) from ring 1!
Object: at [0x80], len=0
Added default entry to table id 0 with action 1
Added default entry to table id 1 with action 1
Pipeline Consistency OK!
STUB Table Action Miss - setting mask to 0x2
STUB Table Action Miss - setting mask to 0x2
Got 1 object(s) from ring 0!
Object: at [0x80], len=0
Got 1 object(s) from ring 1!
Object: at [0x80], len=0
Added default entry to table id 0 with action 1
Added default entry to table id 1 with action 1
Pipeline Consistency OK!
STUB Table Action Miss - setting mask to 0x3
STUB Table Action Miss - setting mask to 0x3
Got 2 object(s) from ring 0!
Object: at [0x80], len=0
Object: at [0x80], len=0
Got 2 object(s) from ring 1!
Object: at [0x80], len=0
Object: at [0x80], len=0
Setting first table to output to next table
Added default entry to table id 0 with action 3
Setting second table to output to port
Added default entry to table id 0 with action 1
Setting first table to output to next table
Added default entry to table id 2 with action 3
Setting second table to output to port
Added default entry to table id 2 with action 1
Pipeline Consistency OK!
Got 2 object(s) from ring 0!
Object: at [0x80], len=0
Object: at [0x80], len=0
Got 2 object(s) from ring 1!
Object: at [0x80], len=0
Object: at [0x80], len=0
TEST - two tables, hitmask override to 0x01
Setting first table to output to next table
Added default entry to table id 0 with action 3
Setting second table to output to port
Added default entry to table id 0 with action 1
Setting first table to output to next table
Added default entry to table id 2 with action 3
Setting second table to output to port
Added default entry to table id 2 with action 1
Pipeline Consistency OK!
STUB Table Action Miss - setting mask to 0x1
STUB Table Action Miss - setting mask to 0x1
STUB Table Action Miss - setting mask to 0x1
STUB Table Action Miss - setting mask to 0x1
Got 1 object(s) from ring 0!
Object: at [0x80], len=0
Got 1 object(s) from ring 1!
Object: at [0x80], len=0
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /run/user/1000/dpdk/table_autotest/mp_socket
EAL: Selected IOVA mode 'VA'
APP: HPET is not enabled, using TSC as default timer
setup_pipeline: **** Setting up Stub test
test_pipeline_single_filter: **** Running Stub test
PIPELINE: rte_pipeline_flush: pipeline parameter NULL
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 1
test_pipeline_single_filter: Enqueue onto ring 1
setup_pipeline: **** Setting up Stub test
test_pipeline_single_filter: **** Running Stub test
PIPELINE: rte_pipeline_flush: pipeline parameter NULL
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 1
test_pipeline_single_filter: Enqueue onto ring 1
setup_pipeline: **** Setting up Stub test
test_pipeline_single_filter: **** Running Stub test
PIPELINE: rte_pipeline_flush: pipeline parameter NULL
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 1
test_pipeline_single_filter: Enqueue onto ring 1
setup_pipeline: **** Setting up Stub test
test_pipeline_single_filter: **** Running Stub test
PIPELINE: rte_pipeline_flush: pipeline parameter NULL
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 1
test_pipeline_single_filter: Enqueue onto ring 1
setup_pipeline: **** Setting up Stub test
test_pipeline_single_filter: **** Running Stub test
PIPELINE: rte_pipeline_flush: pipeline parameter NULL
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 1
test_pipeline_single_filter: Enqueue onto ring 1
setup_pipeline: **** Setting up Stub test
test_pipeline_single_filter: **** Running Stub test
PIPELINE: rte_pipeline_flush: pipeline parameter NULL
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 1
test_pipeline_single_filter: Enqueue onto ring 1
setup_pipeline: **** Setting up Stub test
test_pipeline_single_filter: **** Running Stub test
PIPELINE: rte_pipeline_flush: pipeline parameter NULL
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 0
test_pipeline_single_filter: Enqueue onto ring 1
test_pipeline_single_filter: Enqueue onto ring 1
PIPELINE: rte_pipeline_check_params: Incorrect value for parameter params
PIPELINE: rte_pipeline_create: Pipeline params check failed (-22)
PIPELINE: rte_pipeline_check_params: Incorrect value for parameter name
PIPELINE: rte_pipeline_create: Pipeline params check failed (-22)
PIPELINE: rte_pipeline_check_params: Incorrect value for parameter socket_id
PIPELINE: rte_pipeline_create: Pipeline params check failed (-22)
PIPELINE: rte_pipeline_check: pipeline parameter NULL
PORT: rte_port_ring_reader_create_internal: Invalid Parameters
PORT: rte_port_ring_reader_free: port is NULL
PORT: rte_port_ring_writer_create_internal: Invalid Parameters
PORT: rte_port_ring_writer_free: Port is NULL
PORT: rte_port_ring_writer_create_internal: Invalid Parameters
PORT: rte_port_ring_writer_create_internal: Invalid Parameters
LoongArch-unsupported tests NOT executed in this run
(known architecture limitations, confirmed with the dpdk.org maintainers):
- dispatcher_autotest
- eal_flags_mem_autotest
- event_eth_tx_adapter_autotest
- func_reentrancy_autotest
- timer_secondary_autotest
- atomic_autotest
- compressdev_autotest
- distributor_autotest
- eal_flags_c_opt_autotest
- eal_flags_main_opt_autotest
- eal_flags_n_opt_autotest
- eal_flags_pagesz_mem_autotest
- eal_flags_hpet_autotest
- eal_flags_no_huge_autotest
- eal_flags_a_opt_autotest
- eal_flags_b_opt_autotest
- eal_flags_vdev_opt_autotest
- eal_flags_r_opt_autotest
- eal_flags_file_prefix_autotest
- eal_flags_misc_autotest
- external_mem_autotest
- hash_readwrite_func_autotest
- ipfrag_autotest
- malloc_autotest
- mbuf_autotest
- mcslock_autotest
- memory_autotest
- mempool_autotest
- memzone_autotest
- multiprocess_autotest
- pdcp_autotest
- power_cpufreq_autotest
- power_kvm_vm_autotest
- security_autotest
- stack_autotest
- stack_lf_autotest
- timer_autotest
More information about the test-report
mailing list