How to use --vdev Options for ./dpdk-l3fwd?

[Dinesh Kumar]

Hi Stephen ,

Thanks for your suggestions.I am able to resolve --vdev error  however I am
having another issue related to buffer.
.*/dpdk-l3fwd -c f -n 4 --vdev=net_tap3 -- -p 0x3
--config="(0,0,1),(0,1,2)"*
EAL: Detected CPU lcores: 8
EAL: Detected NUMA nodes: 1
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available 1048576 kB hugepages reported
EAL: VFIO support initialized
EAL: Probe PCI driver: net_virtio (1af4:1000) device: 0000:00:03.0 (socket
0)
eth_virtio_pci_init(): Failed to init PCI device
EAL: Requested device 0000:00:03.0 cannot be used
EAL: Probe PCI driver: net_iavf (8086:154c) device: 0000:00:05.0 (socket 0)
EAL: Probe PCI driver: net_iavf (8086:154c) device: 0000:00:06.0 (socket 0)
TELEMETRY: No legacy callbacks, legacy socket not created
Neither LPM, EM, or FIB selected, defaulting to LPM
Initializing port 0 ... Creating queues: nb_rxq=2 nb_txq=4... Port 0
modified RSS hash function based on hardware support,requested:0xa38c
configured:0x238c



*iavf_dev_init_vlan(): Failed to update vlan offloadiavf_dev_configure():
configure VLAN failed: -95EAL: Error - exiting with code: 1  Cause: Cannot
init mbuf pool on socket 0*

Do I need to update any parameters?
Do I need to add a routing rule parameter?
Any help /pointers will be really appreciated.
FYI. I just want to testL3  forwarding via DPDK using the Tap interface The
flow is :
On Vm1 .*/dpdk-l3fwd will create a Tap interface and then I will link this
interface with a network namespace and then ping a destination address via
the DPDK application running on VM1 and get captured on DPDK application
running on another VM2 and I am stuck with creation Tap interface on VM1
via *  .
*/dpdk-l3fwd.*
Regards,
Dinesh Kumar



On Mon, Apr 10, 2023 at 7:08 PM Stephen Hemminger <
stephen at networkplumber.org> wrote:

> On Mon, 10 Apr 2023 18:47:59 -0400
> Dinesh Kumar <raidinesh at utexas.edu> wrote:
>
> > Hi There,
> > I am new to the DPDK example and having issue with using  --vdev options
> > for DPDK example and it is throwing the below error.
> >
> > ./dpdk-l3fwd --log-level *:debug -c f -n 4 -- -p 0x3 --vdev
> > 'net_pcap0,rx_pcap=input.pcap,tx_pcap=output.pcap'
> >
> > -----------------------
> > iavf_check_api_version(): Peer is supported PF host
> > iavf_read_msg_from_pf(): Can't read msg from AQ
> > iavf_read_msg_from_pf(): AQ from pf carries opcode 3, retval 0
> > iavf_dev_alarm_handler(): ICR01_ADMINQ is reported
> > iavf_handle_pf_event_msg(): VIRTCHNL_EVENT_LINK_CHANGE event
> > iavf_handle_virtchnl_msg(): adminq response is received, opcode = 26
> > EAL: lib.telemetry log level changed from disabled to debug
> > TELEMETRY: Attempting socket bind to path
> > '/var/run/dpdk/rte/dpdk_telemetry.v2'
> > TELEMETRY: Socket creation and binding ok
> > TELEMETRY: Telemetry initialized ok
> > TELEMETRY: No legacy callbacks, legacy socket not created
> > *./dpdk-l3fwd: unrecognized option '--vdev'*
> > ./dpdk-l3fwd [EAL options] -- -p PORTMASK [-P] [--lookup] --config
> > (port,queue,lcore)[,(port,queue,lcore)] [--rx-queue-size NPKTS]
> > [--tx-queue-size NPKTS] [--eth-dest=X,MM:MM:MM:MM:MM:MM] [--max-pkt-len
> > PKTLEN] [--no-numa] [--hash-entry-num] [--ipv6] [--parse-ptype]
> > [--per-port-pool] [--mode] [--eventq-sched] [--event-vector
> > [--event-vector-size SIZE] [--event-vector-tmo NS]] [-E] [-L]
> >
> > please let me know if I am missing some options that need to be added
> with
> > --vdev
>
>
> DPDK options are split into the options for the DPDK infrastructure (EAL)
> and those
> used by the applications. They are separated by the -- option.
>
> In your example, the vdev option belongs to the DPDK infrastructure not
> the application.
> Put it it before the -- and it should work
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mails.dpdk.org/archives/users/attachments/20230411/8a93f6a6/attachment.htm>