Issue with rte_eth_dev_start
Igor de Paula
igordptx at gmail.com
Fri Apr 21 14:39:18 CEST 2023
>From what I can tell, dpdk calles the function vfio_disable_msix in the
stop and start function. The reason it does not happen in start up is that
I don't call stop before.
Calling stop and then start calls the function twice. Which maybe shouldn't
happen... Is it a bug?
On Thu, Apr 20, 2023 at 12:33 PM Igor de Paula <igordptx at gmail.com> wrote:
> Hi,
> I am having trouble with restarting a HW port allocated to DPDK.
> I am running the DPDK version: 21.08.0 and Ubuntu 20.04.3 LTS.
> The driver is : net_e100igb
> After I start the port with no issues I try to call rte_eth_dev_stop to
> stop it.
> When I am ready I call rte_eth_dev_start to start it again an I get the
> following message:
> EAL: Error disabling MSI-X interrupts for fd 46.
> I am not sure what this error is coming from and what it causes.
> I found little information online. If someone could explain, I would
> really appreciate it.
> This is a copy print on setup with no issues:
> 2023-04-20 11:09:51.703542: Driver: net_e1000_igb
> 2023-04-20 11:09:51.703546: Bus Id: 0000:01:00.0
> 2023-04-20 11:09:51.703551: rx offload cap: 280e (92e0f)
> 2023-04-20 11:09:51.703555: tx offload cap: 8002 (803f)
> 2023-04-20 11:09:51.703559: NUMA Socket: 0
> 2023-04-20 11:09:51.703563: MAC Address: b4:96:91:63:62:40
> 2023-04-20 11:09:51.703568: Max Rx Queue: 8
> 2023-04-20 11:09:51.703572: Max Tx Queue: 8
> 2023-04-20 11:09:51.703577: Max Rx Descriptors: 4096
> 2023-04-20 11:09:51.703581: Max Tx Descriptors: 4096
> 2023-04-20 11:09:51.703585: Max Rx Packet Length: 16383
> 2023-04-20 11:09:51.703589: Available Link Speeds: 10Mb/s 100Mb/s 1Gb/s
> 2023-04-20 11:09:51.703608: Fixed Link Speed: Auto
> 2023-04-20 11:09:51.703616: Fixed Duplex: Auto
> 2023-04-20 11:09:51.703623: MTU Set to: 16383
> 2023-04-20 11:09:51.703632: Actual Rx Descriptors: 4096
> 2023-04-20 11:09:51.703636: Actual Tx Descriptors: 4096
> 2023-04-20 11:09:51.703695: Set up 1 send queues
> 2023-04-20 11:09:51.703700: Actual MTU: 16383
> 2023-04-20 11:09:51.703704: Actual Linkspeed: 0
> 2023-04-20 11:09:51.703708: Actual duplex: 0
> 2023-04-20 11:09:51.703713: Successfully set port interrupt event
> 2023-04-20 11:09:51.818085: Flow control turned off for Port 0
> 2023-04-20 11:09:51.844179: Port 0 up and running
> 2023-04-20 11:09:51.844303: Event type: LSC interrupt
> 2023-04-20 11:09:51.844382: Port 0 Link Down
>
> And after I stop and start:
> 2023-04-20 11:11:00.492428: Driver: net_e1000_igb
> 2023-04-20 11:11:00.492476: Bus Id: 0000:01:00.0
> 2023-04-20 11:11:00.492526: rx offload cap: 280e (92e0f)
> 2023-04-20 11:11:00.492576: tx offload cap: 8002 (803f)
> 2023-04-20 11:11:00.492624: NUMA Socket: 0
> 2023-04-20 11:11:00.492672: MAC Address: b4:96:91:63:62:40
> 2023-04-20 11:11:00.492721: Max Rx Queue: 8
> 2023-04-20 11:11:00.492770: Max Tx Queue: 8
> 2023-04-20 11:11:00.492813: Max Rx Descriptors: 4096
> 2023-04-20 11:11:00.492851: Max Tx Descriptors: 4096
> 2023-04-20 11:11:00.492889: Max Rx Packet Length: 16383
> 2023-04-20 11:11:00.492958: Available Link Speeds: 10Mb/s 100Mb/s 1Gb/s
> 2023-04-20 11:11:00.493207: Fixed Link Speed: Auto
> 2023-04-20 11:11:00.493301: Fixed Duplex: Full
> 2023-04-20 11:11:00.493822: MTU Set to: 16383
> 2023-04-20 11:11:00.493889: Actual Rx Descriptors: 4096
> 2023-04-20 11:11:00.493936: Actual Tx Descriptors: 4096
> 2023-04-20 11:11:00.494190: Actual MTU: 16383
> 2023-04-20 11:11:00.494229: Actual Linkspeed: 0
> 2023-04-20 11:11:00.494266: Actual duplex: 1
> 2023-04-20 11:11:00.494305: Successfully set port interrupt event
> *EAL: Error disabling MSI-X interrupts for fd 46*
> 2023-04-20 11:11:00.603181: Flow control turned off for Port 0
> 2023-04-20 11:11:00.629151: Port 0 up and running
> 2023-04-20 11:11:00.629222: Event type: LSC interrupt
> 2023-04-20 11:11:00.629273: Port 0 Link Down
>
>
> Thanks,
> Igor
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mails.dpdk.org/archives/users/attachments/20230421/6752150e/attachment.htm>
More information about the users
mailing list