[dpdk-ci] [DPDKLAB] 25G Broadcom NIC in Arm hardware

[David Liu]

Hi Ajit,

We have a 25G Broadcom NIC that is installed on an Arm machine.
And I am running into a problem when I try to run nic_single_core_perf on
the NIC.
Currently, we are using: Trex v2.86 and dts from
http://git.dpdk.org/tools/dts/
All the NICs are up and running when testing.

The problem is an error when I try to run the test case inside
the nic_single_core_perf:

TestNicSingleCorePerf: Test running at parameters: framesize: 64, rxd/txd:
> 512
>                dut.172.18.0.41:
> x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32,33 -n 4
>  --file-prefix=dpdk_15311_20210113190237   -a 0000:93:00.0 -a 0000:93:00.1
> -- -i --portmask=0x3 --txd=512 --rxd=512 --nb-cores=1
>                dut.172.18.0.41: start
>          TestNicSingleCorePerf: Test Case test_perf_nic_single_core Result
> ERROR: Traceback (most recent call last):
>   File "/opt/dts/framework/test_case.py", line 319, in _execute_test_case
>     case_obj()
>   File "tests/TestSuite_nic_single_core_perf.py", line 196, in
> test_perf_nic_single_core
>     self.perf_test(self.nb_ports)
>   File "tests/TestSuite_nic_single_core_perf.py", line 270, in perf_test
>     _, packets_received =
> self.tester.pktgen.measure_throughput(stream_ids=streams,
> options=traffic_opt)
>   File "/opt/dts/framework/pktgen_base.py", line 245, in measure_throughput
>     self._prepare_transmission(stream_ids=stream_ids)
>   File "/opt/dts/framework/pktgen_trex.py", line 778, in
> _prepare_transmission
>     self._conn.reset(ports=self._ports)
>   File
> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py",
> line 51, in wrap2
>     ret = f(*args, **kwargs)
>   File
> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py",
> line 339, in reset
>     self.clear_stats(ports)
>   File
> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py",
> line 51, in wrap2
>     ret = f(*args, **kwargs)
>   File
> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py",
> line 1492, in clear_stats
>     self._clear_stats_common(ports, clear_global, clear_xstats)
>   File
> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_client.py",
> line 2876, in _clear_stats_common
>     raise TRexError(rc)
> trex.common.trex_exceptions.TRexError: *** [RPC] - Failed to get server
> response from tcp://172.18.0.40:4501


I also try to run TRex in stateless mode with./t-rex-64 -i --cfg
/etc/trex_cfg.yaml and  connect with ./trex-console

Then start sending traffic with command

> trex>start -f stl/imix.py


But this will cause an error to turn off Trex.

trex>
> 2021-01-13 19:56:21 - [server][warning]  - Server has been shutdown -
> cause: 'WATCHDOG: task 'Trex DP core 1' has not responded for more than
> 1.00135 seconds - timeout is 1 seconds
> *** traceback follows ***
> 1       0x561be173cf5a ./_t-rex-64(+0x19af5a) [0x561be173cf5a]
> 2       0x7feea3ac0980 /lib/x86_64-linux-gnu/libpthread.so.0(+0x12980)
> [0x7feea3ac0980]
> 3       0x561be1a05a2a rte_delay_us_block + 106
> 4       0x561be16ce874 CCoreEthIF::send_burst(CCorePerPort*, unsigned
> short, CVirtualIFPerSideStats*) + 3220
> 5       0x561be16abf57 CCoreEthIF::flush_tx_queue() + 31
> 6       0x561be171e3d9
> CNodeGenerator::handle_maintenance(CFlowGenListPerThread*) + 265
> 7       0x561be171f7ec CNodeGenerator::handle_flow_sync(CGenNode*,
> CFlowGenListPerThread*, bool&) + 92
> 8       0x561be171fc98 CNodeGenerator::handle_slow_messages(unsigned char,
> CGenNode*, CFlowGenListPerThread*, bool) + 184
> 9       0x561be16cb5f1 int CNodeGenerator::flush_file_realtime<23,
> false>(double, double, CFlowGenListPerThread*, double&) + 881
> 10      0x561be1905212 TrexStatelessDpCore::start_scheduler() + 226
> 11      0x561be1883ae9 TrexDpCore::start() + 89
> 12      0x561be1714113
> CFlowGenListPerThread::start(std::__cxx11::basic_string<char,
> std::char_traits<char>, std::allocator<char> >&, CPreviewMode&) + 115
> 13      0x561be16af8dd CGlobalTRex::run_in_core(unsigned char) + 487
> 14      0x561be16d11ad ./_t-rex-64(+0x12f1ad) [0x561be16d11ad]
> 15      0x561be1a1dfaa eal_thread_loop + 426
> 16      0x7feea3ab56db /lib/x86_64-linux-gnu/libpthread.so.0(+0x76db)
> [0x7feea3ab56db]
> 17      0x7feea2a8571f clone + 63
>
> *** addr2line information follows ***
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> ??:0
> '


I believe if everything is working, this should not turn off trex but
please correct me if I am wrong.
I wonder if you have any suggestion of how I can approach this issue?

Best,
David
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mails.dpdk.org/archives/ci/attachments/20210113/ea6f6f76/attachment.htm>