[dpdk-dev] Mellanox PMD failure w/DPDK-2.1.0 and MLNX_OFED-3.1-1.0.3

Bill O'Hara billtohara at gmail.com
Thu Oct 8 22:55:11 CEST 2015


Olga

If it's all all helpful, linking our code against dpdk-2.0 and (statically)
against the appropriate custom-built libibverbs that we used with it, works
on those machines. There is of course no call to ibv_exp_create_res_domain()
in that version of the library. But it at least confirms basic operation of
the upgraded OFED and firmware on those boxes.

Is there anything else we can check or confirm for you?

thanks
bill


On Thu, Oct 8, 2015 at 9:06 AM, Bill O'Hara <billtohara at gmail.com> wrote:

> Hi Olga
>
> Firmware is version 2.35.5100. Configuration details below.
>
> Thanks for any hints.
> bill
>
> root:~# cat /etc/modprobe.d/mlx4_core.conf
> options mlx4_core port_type_array=2,2 num_vfs=16 probe_vf=4
>
> root:~# ibstat
> CA 'mlx4_0'
> CA type: MT4099
> Number of ports: 1
> Firmware version: 2.35.5100
> Hardware version: 1
> Node GUID: 0xf4521403008f1680
> System image GUID: 0xf4521403008f1683
> Port 1:
> State: Active
> Physical state: LinkUp
> Rate: 56
> Base lid: 0
> LMC: 0
> SM lid: 0
> Capability mask: 0x0c010000
> Port GUID: 0xf65214fffe8f1680
> Link layer: Ethernet
> CA 'mlx4_1'
> CA type: MT4100
> Number of ports: 1
> Firmware version: 2.35.5100
> Hardware version: 1
> Node GUID: 0x00140500c2d3b05f
> System image GUID: 0xf4521403008f1683
> Port 1:
> State: Active
> Physical state: LinkUp
> Rate: 56
> Base lid: 0
> LMC: 0
> SM lid: 0
> Capability mask: 0x0c010000
> Port GUID: 0xfc9739fffe1272c3
> Link layer: Ethernet
> CA 'mlx4_2'
> CA type: MT4100
> Number of ports: 1
> Firmware version: 2.35.5100
> Hardware version: 1
> Node GUID: 0x00140500b90af10c
> System image GUID: 0xf4521403008f1683
> Port 1:
> State: Active
> Physical state: LinkUp
> Rate: 56
> Base lid: 0
> LMC: 0
> SM lid: 0
> Capability mask: 0x0c010000
> Port GUID: 0x20ecbbfffeefb934
> Link layer: Ethernet
> CA 'mlx4_3'
> CA type: MT4100
> Number of ports: 1
> Firmware version: 2.35.5100
> Hardware version: 1
> Node GUID: 0x001405009661e607
> System image GUID: 0xf4521403008f1683
> Port 1:
> State: Active
> Physical state: LinkUp
> Rate: 56
> Base lid: 0
> LMC: 0
> SM lid: 0
> Capability mask: 0x0c010000
> Port GUID: 0xf4c8e6fffe5abc89
> Link layer: Ethernet
> CA 'mlx4_4'
> CA type: MT4100
> Number of ports: 1
> Firmware version: 2.35.5100
> Hardware version: 1
> Node GUID: 0x00140500bd09e128
> System image GUID: 0xf4521403008f1683
> Port 1:
> State: Active
> Physical state: LinkUp
> Rate: 56
> Base lid: 0
> LMC: 0
> SM lid: 0
> Capability mask: 0x0c010000
> Port GUID: 0x5828e1fffe34f919
> Link layer: Ethernet
>
> On Thu, Oct 8, 2015 at 2:03 AM, Olga Shern <olgas at mellanox.com> wrote:
>
>> Hi Bill,
>>
>> Can you please check the fw version that is installed on your ConnectX3?
>>
>> Thanks
>>
>>
>> Sent from Samsung Mobile.
>>
>>
>> -------- Original message --------
>> From: Olga Shern
>> Date:08/10/2015 7:55 AM (GMT+00:00)
>> To: Bill O'Hara ,dev at dpdk.org
>> Subject: RE: [dpdk-dev] Mellanox PMD failure w/DPDK-2.1.0 and
>> MLNX_OFED-3.1-1.0.3
>>
>> Hi Bill,
>>
>> There shouldn’t be any problem with what you are doing.
>> We are checking this now.
>>
>> Best Regards,
>> Olga
>>
>> -----Original Message-----
>> From: dev [mailto:dev-bounces at dpdk.org <dev-bounces at dpdk.org>] On Behalf
>> Of Bill O'Hara
>> Sent: Thursday, October 08, 2015 6:05 AM
>> To: dev at dpdk.org
>> Subject: [dpdk-dev] Mellanox PMD failure w/DPDK-2.1.0 and
>> MLNX_OFED-3.1-1.0.3
>>
>> Hello
>>
>> I wonder if anyone can suggest why previously working dpdk code may fail
>> in the Mellanox pmd code in dpdk-2.1.0, seemingly due to failure to create
>> a "resource domain" via ibv_exp_create_res_domain(). I must admit I haven't
>> seen that verb before, and it appears to be returning null with no error
>> message.
>>
>> The DPDK log gives these hints:
>>
>> PMD: librte_pmd_mlx4: 0xa4fc20: TX queues number update: 0 -> 1
>> PMD: librte_pmd_mlx4: 0xa4fc20: RX queues number update: 0 -> 1
>> PMD: librte_pmd_mlx4: 0xa4fc20: RD creation failure: Cannot allocate
>> memory
>>
>> I'm using dpdk-2.10.0 and  MLNX_OFED_LINUX-3.1-1.0.3 on ubuntu14.04 with a
>> connectx-3 card.
>>
>> thanks
>> bill
>>
>
>


More information about the dev mailing list