[dpdk-dev] [PATCHv6 00/33] NXP DPAA2 PMD
Hemant Agrawal
hemant.agrawal at nxp.com
Wed Jan 25 05:03:26 CET 2017
On 1/24/2017 4:55 PM, Ferruh Yigit wrote:
> On 1/23/2017 5:58 PM, Ferruh Yigit wrote:
>> On 1/23/2017 11:59 AM, Hemant Agrawal wrote:
>> <...>
>>
>>>
>>> Hemant Agrawal (33):
>>> mk/dpaa2: add the crc support to the machine type
>>> drivers/common/dpaa2: adding qbman driver
>>> bus/fslmc: introducing fsl-mc bus driver
>>> bus/fslmc: introduce mc object functions
>>> bus/fslmc: add mc dpni object support
>>> bus/fslmc: add mc dpio object support
>>> bus/fslmc: add mc dpbp object support
>>> bus/fslmc: add mc dpseci object support
>>> eal/vfio: adding vfio utility functions in map file
>>> bus/fslmc: add vfio support
>>> bus/fslmc: scan for net and sec devices
>>> net/dpaa2: introducing NXP dpaa2 pmd driver
>>> doc: add dpaa2 nic details
>>> bus/fslmc: add debug log message support
>>> drivers/common/dpaa2: dpio portal driver
>>> drivers/pool/dpaa2: adding hw offloaded mempool
>>> drivers/common/dpaa2: dpio routine to affine to crypto threads
>>> net/dpaa2: adding eth ops to dpaa2
>>> net/dpaa2: add rss flow distribution
>>> net/dpaa2: configure mac address at init
>>> net/dpaa2: attach the buffer pool to dpni
>>> net/dpaa2: add support for l3 and l4 checksum offload
>>> net/dpaa2: add support for promiscuous mode
>>> net/dpaa2: add mtu config support
>>> net/dpaa2: add packet rx and tx support
>>> net/dpaa2: rx packet parsing and packet type support
>>> net/dpaa2: link status update
>>> net/dpaa2: basic stats support
>>> net/dpaa2: enable stashing for LS2088A devices
>>> net/dpaa2: add support for non hw buffer pool packet transmit
>>> net/dpaa2: enabling the use of physical addresses
>>> bus/fslmc: add support for dmamap to ARM SMMU
>>> drivers/common/dpaa2: frame queue based dq storage alloc
>>>
>>
>> devtools/check-git-log.sh gives following errors:
>>
>> Wrong headline prefix:
>> bus/fslmc: add debug log message support
>
> Some of these warnings are because of the assumption that the scope of
> changed files are limited to the patch title tag.
>
> For example, for this patch, because of the "bus/fslmc:", it is expected
> that all modified files are under "drivers/bus/fslmc" folder, but this
> patch modifies:
> bus/fslmc/*
> common/dpaa2/*
> net/dpaa2/*
>
> I can guess different dpaa2 modules (bus/common/net) has dependencies to
> each other, and may not always be possible to separate them. This needs
> to be investigated per patch.
>
> But the more they are separated, easier to review / understand them. And
> I am aware this is easier to say than to do it.
>
Thanks for your comments.
I will make an attempt to fix them.
> thanks,
> ferruh
>
>
>> drivers/common/dpaa2: dpio portal driver
>
> Or this one, scope is "drivers/common/dpaa2", but all the modifies files
> are under "/drivers/bus/*".
>
>
>> drivers/common/dpaa2: dpio routine to affine to crypto threads
>> net/dpaa2: adding eth ops to dpaa2
>> net/dpaa2: attach the buffer pool to dpni
>> net/dpaa2: add support for l3 and l4 checksum offload
>> net/dpaa2: add mtu config support
>> net/dpaa2: add packet rx and tx support
>> net/dpaa2: enabling the use of physical addresses
>> bus/fslmc: add support for dmamap to ARM SMMU
>> drivers/common/dpaa2: frame queue based dq storage alloc
>> Wrong headline lowercase:
>> net/dpaa2: introducing NXP dpaa2 pmd driver
>> doc: add dpaa2 nic details
>> drivers/pool/dpaa2: adding hw offloaded mempool
>> net/dpaa2: add rss flow distribution
>> net/dpaa2: configure mac address at init
>> net/dpaa2: add support for l3 and l4 checksum offload
>> net/dpaa2: add mtu config support
>> net/dpaa2: add packet rx and tx support
>> net/dpaa2: rx packet parsing and packet type support
>> net/dpaa2: add support for non hw buffer pool packet transmit
>> Headline too long:
>> drivers/common/dpaa2: dpio routine to affine to crypto threads
>> net/dpaa2: add support for non hw buffer pool packet transmit
>>
>> <...>
>>
>>
>>
>
>
More information about the dev
mailing list