[dpdk-dev] [PATCH] dpdk: remove typos using codespell utility
Jerin Jacob
jerin.jacob at caviumnetworks.com
Wed Jun 7 07:05:06 CEST 2017
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob at caviumnetworks.com>
---
- This is not completely an automatic process. The tool can do 90% of the job
but need to crosscheck the changes manually.
- The patchset does not create any new check patch errors. This patch only
fixes the typos, not the existing code check patch issues.
---
app/test-pmd/testpmd.c | 2 +-
devtools/cocci/mtod-offset.cocci | 2 +-
devtools/validate-abi.sh | 4 +--
doc/guides/nics/sfc_efx.rst | 2 +-
doc/guides/tools/cryptoperf.rst | 6 ++--
drivers/bus/fslmc/portal/dpaa2_hw_pvt.h | 2 +-
drivers/bus/fslmc/qbman/qbman_portal.c | 4 +--
drivers/crypto/qat/qat_crypto.c | 2 +-
drivers/net/ark/ark_ethdev.c | 2 +-
drivers/net/bnx2x/bnx2x.c | 8 ++---
drivers/net/bnx2x/bnx2x_stats.c | 10 +++---
drivers/net/bnx2x/bnx2x_vfpf.h | 2 +-
drivers/net/bnx2x/ecore_hsi.h | 12 +++----
drivers/net/bnx2x/ecore_init.h | 2 +-
drivers/net/bnx2x/ecore_sp.c | 4 +--
drivers/net/bnx2x/ecore_sp.h | 22 ++++++-------
drivers/net/bnx2x/elink.c | 16 ++++-----
drivers/net/bonding/rte_eth_bond_8023ad.c | 2 +-
drivers/net/bonding/rte_eth_bond_pmd.c | 4 +--
drivers/net/bonding/rte_eth_bond_private.h | 2 +-
drivers/net/cxgbe/cxgbe_main.c | 2 +-
drivers/net/cxgbe/sge.c | 4 +--
drivers/net/enic/enic_main.c | 2 +-
drivers/net/i40e/i40e_ethdev.c | 10 +++---
drivers/net/i40e/i40e_ethdev.h | 2 +-
drivers/net/i40e/i40e_rxtx.c | 6 ++--
drivers/net/ixgbe/ixgbe_ethdev.h | 2 +-
drivers/net/ixgbe/ixgbe_fdir.c | 2 +-
drivers/net/nfp/nfp_net.c | 2 +-
drivers/net/qede/qede_rxtx.c | 6 ++--
drivers/net/ring/rte_eth_ring.c | 2 +-
drivers/net/sfc/sfc_rx.c | 2 +-
drivers/net/tap/rte_eth_tap.c | 2 +-
drivers/net/thunderx/nicvf_ethdev.c | 2 +-
examples/Makefile | 2 +-
examples/bond/main.c | 2 +-
examples/cmdline/Makefile | 2 +-
examples/distributor/Makefile | 2 +-
examples/ethtool/ethtool-app/main.c | 2 +-
examples/ethtool/lib/rte_ethtool.c | 2 +-
examples/ethtool/lib/rte_ethtool.h | 4 +--
examples/exception_path/Makefile | 2 +-
examples/helloworld/Makefile | 2 +-
examples/ip_fragmentation/Makefile | 2 +-
examples/ip_fragmentation/main.c | 2 +-
examples/ip_reassembly/Makefile | 2 +-
examples/ipv4_multicast/Makefile | 2 +-
examples/kni/Makefile | 2 +-
examples/l2fwd/Makefile | 2 +-
examples/l3fwd-acl/Makefile | 2 +-
examples/l3fwd-power/Makefile | 2 +-
examples/l3fwd-vf/Makefile | 2 +-
examples/l3fwd/Makefile | 2 +-
examples/l3fwd/l3fwd_sse.h | 2 +-
examples/link_status_interrupt/Makefile | 2 +-
examples/load_balancer/Makefile | 2 +-
examples/multi_process/Makefile | 2 +-
examples/multi_process/client_server_mp/Makefile | 2 +-
.../client_server_mp/mp_client/Makefile | 2 +-
.../client_server_mp/mp_server/Makefile | 2 +-
examples/multi_process/l2fwd_fork/Makefile | 2 +-
examples/multi_process/l2fwd_fork/flib.h | 2 +-
examples/multi_process/simple_mp/Makefile | 2 +-
examples/multi_process/symmetric_mp/Makefile | 2 +-
examples/netmap_compat/Makefile | 2 +-
examples/netmap_compat/bridge/Makefile | 2 +-
examples/netmap_compat/lib/compat_netmap.c | 2 +-
examples/performance-thread/common/lthread_mutex.c | 2 +-
examples/performance-thread/l3fwd-thread/main.c | 2 +-
examples/qos_meter/Makefile | 2 +-
examples/qos_sched/Makefile | 2 +-
examples/quota_watermark/Makefile | 2 +-
examples/quota_watermark/qw/Makefile | 2 +-
examples/quota_watermark/qwctl/Makefile | 2 +-
examples/timer/Makefile | 2 +-
examples/vhost/Makefile | 2 +-
examples/vhost_xen/Makefile | 2 +-
examples/vhost_xen/main.c | 2 +-
examples/vhost_xen/xenstore_parse.c | 4 +--
examples/vmdq/Makefile | 2 +-
examples/vmdq_dcb/Makefile | 2 +-
lib/librte_bitratestats/rte_bitrate.c | 2 +-
lib/librte_compat/rte_compat.h | 2 +-
lib/librte_eal/common/eal_common_log.c | 4 +--
lib/librte_eal/common/include/rte_alarm.h | 2 +-
lib/librte_eal/common/include/rte_bus.h | 2 +-
lib/librte_eal/common/include/rte_malloc.h | 2 +-
lib/librte_eal/common/include/rte_time.h | 2 +-
lib/librte_eal/linuxapp/eal/eal_pci_vfio.c | 2 +-
.../linuxapp/kni/ethtool/igb/e1000_82575.c | 2 +-
lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c | 2 +-
lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h | 2 +-
.../linuxapp/kni/ethtool/ixgbe/ixgbe_api.c | 2 +-
.../linuxapp/kni/ethtool/ixgbe/ixgbe_common.c | 2 +-
.../linuxapp/kni/ethtool/ixgbe/kcompat.h | 2 +-
lib/librte_ether/rte_ethdev.h | 2 +-
lib/librte_hash/rte_cuckoo_hash.c | 12 +++----
lib/librte_ip_frag/rte_ip_frag.h | 4 +--
lib/librte_ip_frag/rte_ipv4_reassembly.c | 2 +-
lib/librte_ip_frag/rte_ipv6_reassembly.c | 2 +-
lib/librte_kni/rte_kni.c | 2 +-
lib/librte_reorder/rte_reorder.h | 2 +-
lib/librte_timer/rte_timer.c | 2 +-
lib/librte_vhost/rte_vhost.h | 2 +-
lib/librte_vhost/virtio_net.c | 2 +-
mk/arch/i686/rte.vars.mk | 10 +++---
mk/arch/x86_64/rte.vars.mk | 10 +++---
mk/exec-env/bsdapp/rte.vars.mk | 6 ++--
mk/exec-env/linuxapp/rte.vars.mk | 6 ++--
mk/machine/atm/rte.vars.mk | 16 ++++-----
mk/machine/default/rte.vars.mk | 16 ++++-----
mk/machine/hsw/rte.vars.mk | 16 ++++-----
mk/machine/ivb/rte.vars.mk | 16 ++++-----
mk/machine/native/rte.vars.mk | 16 ++++-----
mk/machine/nhm/rte.vars.mk | 16 ++++-----
mk/machine/snb/rte.vars.mk | 16 ++++-----
mk/machine/wsm/rte.vars.mk | 16 ++++-----
mk/rte.vars.mk | 2 +-
mk/target/generic/rte.vars.mk | 38 +++++++++++-----------
mk/toolchain/clang/rte.vars.mk | 8 ++---
mk/toolchain/gcc/rte.vars.mk | 8 ++---
mk/toolchain/icc/rte.vars.mk | 8 ++---
test/test/test_cmdline_cirbuf.c | 2 +-
test/test/test_distributor.c | 2 +-
test/test/test_eal_flags.c | 4 +--
test/test/test_func_reentrancy.c | 4 +--
test/test/test_hash.c | 10 +++---
test/test/test_interrupts.c | 6 ++--
test/test/test_link_bonding.c | 28 ++++++++--------
test/test/test_link_bonding_mode4.c | 6 ++--
test/test/test_malloc.c | 2 +-
test/test/test_mbuf.c | 2 +-
test/test/test_spinlock.c | 2 +-
133 files changed, 304 insertions(+), 304 deletions(-)
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index d1041afa5..b878978de 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -389,7 +389,7 @@ static void eth_event_callback(uint8_t port_id,
static int all_ports_started(void);
/*
- * Helper function to check if socket is allready discovered.
+ * Helper function to check if socket is already discovered.
* If yes, return positive value. If not, return zero.
*/
int
diff --git a/devtools/cocci/mtod-offset.cocci b/devtools/cocci/mtod-offset.cocci
index 13134e9df..3f83f3223 100644
--- a/devtools/cocci/mtod-offset.cocci
+++ b/devtools/cocci/mtod-offset.cocci
@@ -55,7 +55,7 @@ expression M, O1, O2;
//
-// Cleanup rules. Fold in double casts, remove unnecessary paranthesis, etc.
+// Cleanup rules. Fold in double casts, remove unnecessary parenthesis, etc.
//
@disable paren@
expression M, O;
diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
index 52e4e7ae7..0accc99b1 100755
--- a/devtools/validate-abi.sh
+++ b/devtools/validate-abi.sh
@@ -150,14 +150,14 @@ TAG2="$TAG2 ($HASH2)"
ABICHECK=`which abi-compliance-checker 2>/dev/null`
if [ $? -ne 0 ]
then
- log "INFO" "Cant find abi-compliance-checker utility"
+ log "INFO" "Can't find abi-compliance-checker utility"
cleanup_and_exit 1
fi
ABIDUMP=`which abi-dumper 2>/dev/null`
if [ $? -ne 0 ]
then
- log "INFO" "Cant find abi-dumper utility"
+ log "INFO" "Can't find abi-dumper utility"
cleanup_and_exit 1
fi
diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index 5f825e9a3..7761989c7 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -259,7 +259,7 @@ boolean parameters value.
- ``debug_init`` [bool] (default **n**)
- Enable extra logging during device intialization and startup.
+ Enable extra logging during device initialization and startup.
- ``mcdi_logging`` [bool] (default **n**)
diff --git a/doc/guides/tools/cryptoperf.rst b/doc/guides/tools/cryptoperf.rst
index 2d225d56a..1acde763b 100644
--- a/doc/guides/tools/cryptoperf.rst
+++ b/doc/guides/tools/cryptoperf.rst
@@ -308,9 +308,9 @@ Test Vector File
The test vector file is a text file contain information about test vectors.
The file is made of the sections. The first section doesn't have header.
It contain global information used in each test variant vectors -
-typicaly information about plaintext, ciphertext, cipher key, aut key,
+typically information about plaintext, ciphertext, cipher key, aut key,
initial vector. All other sections begin header.
-The sections contain particular information typicaly digest.
+The sections contain particular information typically digest.
**Format of the file:**
@@ -362,7 +362,7 @@ Examples
Call application for performance throughput test of single Aesni MB PMD
for cipher encryption aes-cbc and auth generation sha1-hmac,
-one milion operations, burst size 32, packet size 64::
+one million operations, burst size 32, packet size 64::
dpdk-test-crypto-perf -l 6-7 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 --
--ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth
diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
index c0223734b..2eb3b7fb2 100644
--- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
+++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
@@ -231,7 +231,7 @@ static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr)
/**
* When we are using Physical addresses as IO Virtual Addresses,
* Need to call conversion routines dpaa2_mem_vtop & dpaa2_mem_ptov
- * whereever required.
+ * wherever required.
* These routines are called with help of below MACRO's
*/
diff --git a/drivers/bus/fslmc/qbman/qbman_portal.c b/drivers/bus/fslmc/qbman/qbman_portal.c
index 5d407cc01..be4e2e577 100644
--- a/drivers/bus/fslmc/qbman/qbman_portal.c
+++ b/drivers/bus/fslmc/qbman/qbman_portal.c
@@ -288,7 +288,7 @@ void *qbman_swp_mc_result(struct qbman_swp *p)
qbman_cena_invalidate_prefetch(&p->sys,
QBMAN_CENA_SWP_RR(p->mc.valid_bit));
ret = qbman_cena_read(&p->sys, QBMAN_CENA_SWP_RR(p->mc.valid_bit));
- /* Remove the valid-bit - command completed iff the rest is non-zero */
+ /* Remove the valid-bit - command completed if the rest is non-zero */
verb = ret[0] & ~QB_VALID_BIT;
if (!verb)
return NULL;
@@ -769,7 +769,7 @@ const struct qbman_result *qbman_swp_dqrr_next(struct qbman_swp *s)
*/
uint32_t dqpi = qbman_cinh_read(&s->sys, QBMAN_CINH_SWP_DQPI);
uint32_t pi = qb_attr_code_decode(&code_dqpi_pi, &dqpi);
- /* there are new entries iff pi != next_idx */
+ /* there are new entries if pi != next_idx */
if (pi == s->dqrr.next_idx)
return NULL;
/* if next_idx is/was the last ring index, and 'pi' is
diff --git a/drivers/crypto/qat/qat_crypto.c b/drivers/crypto/qat/qat_crypto.c
index 386aa453b..37d8a585b 100644
--- a/drivers/crypto/qat/qat_crypto.c
+++ b/drivers/crypto/qat/qat_crypto.c
@@ -757,7 +757,7 @@ qat_pmd_enqueue_op_burst(void *qp, struct rte_crypto_op **ops,
tmp_qp->stats.enqueue_err_count++;
/*
* This message cannot be enqueued,
- * decrease number of ops that wasnt sent
+ * decrease number of ops that wasn't sent
*/
rte_atomic16_sub(&tmp_qp->inflights16,
nb_ops_possible - nb_ops_sent);
diff --git a/drivers/net/ark/ark_ethdev.c b/drivers/net/ark/ark_ethdev.c
index 995c93d3d..062c8e29b 100644
--- a/drivers/net/ark/ark_ethdev.c
+++ b/drivers/net/ark/ark_ethdev.c
@@ -636,7 +636,7 @@ eth_ark_dev_stop(struct rte_eth_dev *dev)
}
/* Stop DDM */
- /* Wait up to 0.1 second. each stop is upto 1000 * 10 useconds */
+ /* Wait up to 0.1 second. each stop is up to 1000 * 10 useconds */
for (i = 0; i < 10; i++) {
status = ark_ddm_stop(ark->ddm.v, 1);
if (status == 0)
diff --git a/drivers/net/bnx2x/bnx2x.c b/drivers/net/bnx2x/bnx2x.c
index 1a7e1c8e1..3e95664eb 100644
--- a/drivers/net/bnx2x/bnx2x.c
+++ b/drivers/net/bnx2x/bnx2x.c
@@ -887,7 +887,7 @@ storm_memset_eq_prod(struct bnx2x_softc *sc, uint16_t eq_prod, uint16_t pfid)
/*
* Post a slowpath command.
*
- * A slowpath command is used to propogate a configuration change through
+ * A slowpath command is used to propagate a configuration change through
* the controller in a controlled manner, allowing each STORM processor and
* other H/W blocks to phase in the change. The commands sent on the
* slowpath are referred to as ramrods. Depending on the ramrod used the
@@ -2002,7 +2002,7 @@ bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link
/*
* Nothing to do during unload if previous bnx2x_nic_load()
- * did not completed succesfully - all resourses are released.
+ * did not completed successfully - all resourses are released.
*/
if ((sc->state == BNX2X_STATE_CLOSED) || (sc->state == BNX2X_STATE_ERROR)) {
return 0;
@@ -3931,7 +3931,7 @@ static void bnx2x_attn_int_deasserted2(struct bnx2x_softc *sc, uint32_t attn)
mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
/*
- * If the olny PXP2_EOP_ERROR_BIT is set in
+ * If the only PXP2_EOP_ERROR_BIT is set in
* STS0 and STS1 - clear it
*
* probably we lose additional attentions between
@@ -5910,7 +5910,7 @@ static void bnx2x_set_234_gates(struct bnx2x_softc *sc, uint8_t close)
(val | HC_CONFIG_0_REG_BLOCK_DISABLE_0));
} else {
-/* Prevent incomming interrupts in IGU */
+/* Prevent incoming interrupts in IGU */
val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
if (close)
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index c489cbeef..6223cfef1 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -1371,9 +1371,9 @@ bnx2x_prep_fw_stats_req(struct bnx2x_softc *sc)
cur_query_entry = &sc->fw_stats_req->query[BNX2X_PORT_QUERY_IDX];
cur_query_entry->kind = STATS_TYPE_PORT;
- /* For port query index is a DONT CARE */
+ /* For port query index is a DON'T CARE */
cur_query_entry->index = SC_PORT(sc);
- /* For port query funcID is a DONT CARE */
+ /* For port query funcID is a DON'T CARE */
cur_query_entry->funcID = htole16(SC_FUNC(sc));
cur_query_entry->address.hi = htole32(U64_HI(cur_data_offset));
cur_query_entry->address.lo = htole32(U64_LO(cur_data_offset));
@@ -1385,7 +1385,7 @@ bnx2x_prep_fw_stats_req(struct bnx2x_softc *sc)
cur_query_entry = &sc->fw_stats_req->query[BNX2X_PF_QUERY_IDX];
cur_query_entry->kind = STATS_TYPE_PF;
- /* For PF query index is a DONT CARE */
+ /* For PF query index is a DON'T CARE */
cur_query_entry->index = SC_PORT(sc);
cur_query_entry->funcID = htole16(SC_FUNC(sc));
cur_query_entry->address.hi = htole32(U64_HI(cur_data_offset));
@@ -1450,7 +1450,7 @@ void bnx2x_memset_stats(struct bnx2x_softc *sc)
if (sc->port.pmf && sc->port.port_stx)
bnx2x_port_stats_base_init(sc);
- /* mark the end of statistics initializiation */
+ /* mark the end of statistics initialization */
sc->stats_init = false;
}
@@ -1536,7 +1536,7 @@ bnx2x_stats_init(struct bnx2x_softc *sc)
bnx2x_port_stats_base_init(sc);
}
- /* mark the end of statistics initializiation */
+ /* mark the end of statistics initialization */
sc->stats_init = FALSE;
}
diff --git a/drivers/net/bnx2x/bnx2x_vfpf.h b/drivers/net/bnx2x/bnx2x_vfpf.h
index 955ea9825..d7cc11be0 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.h
+++ b/drivers/net/bnx2x/bnx2x_vfpf.h
@@ -282,7 +282,7 @@ struct bnx2x_vf_bulletin {
uint16_t version;
uint16_t length;
- uint64_t valid_bitmap; /* bitmap indicating wich fields
+ uint64_t valid_bitmap; /* bitmap indicating which fields
* hold valid values
*/
diff --git a/drivers/net/bnx2x/ecore_hsi.h b/drivers/net/bnx2x/ecore_hsi.h
index 5808e1ae3..5cce66474 100644
--- a/drivers/net/bnx2x/ecore_hsi.h
+++ b/drivers/net/bnx2x/ecore_hsi.h
@@ -2499,7 +2499,7 @@ struct shmem2_region {
* SHMEM_EEE_XXX_ADV definitions (where XXX is replaced by speed).
* bit 28 when 1'b1 EEE was requested.
* bit 29 when 1'b1 tx lpi was requested.
- * bit 30 when 1'b1 EEE was negotiated. Tx lpi will be asserted iff
+ * bit 30 when 1'b1 EEE was negotiated. Tx lpi will be asserted if
* 30:29 are 2'b11.
* bit 31 when 1'b0 bits 15:0 contain a PORT_FEAT_CFG_EEE_ define as
* value. When 1'b1 those bits contains a value times 16 microseconds.
@@ -3911,7 +3911,7 @@ struct client_init_rx_data
uint16_t bd_pause_thr_high /* number of remaining bds above which, we send un-pause message */;
uint16_t sge_pause_thr_low /* number of remaining sges under which, we send pause message */;
uint16_t sge_pause_thr_high /* number of remaining sges above which, we send un-pause message */;
- uint16_t rx_cos_mask /* the bits that will be set on pfc/ safc paket whith will be genratet when this ring is full. for regular flow control set this to 1 */;
+ uint16_t rx_cos_mask /* the bits that will be set on pfc/ safc paket with will be genratet when this ring is full. for regular flow control set this to 1 */;
uint16_t silent_vlan_value /* The vlan to compare, in case, silent vlan is set */;
uint16_t silent_vlan_mask /* The vlan mask, in case, silent vlan is set */;
uint32_t reserved6[2];
@@ -4903,7 +4903,7 @@ enum eth_tx_vlan_type
*/
enum eth_vlan_filter_mode
{
- ETH_VLAN_FILTER_ANY_VLAN /* Dont filter by vlan */,
+ ETH_VLAN_FILTER_ANY_VLAN /* Don't filter by vlan */,
ETH_VLAN_FILTER_SPECIFIC_VLAN /* Only the vlan_id is allowed */,
ETH_VLAN_FILTER_CLASSIFY /* Vlan will be added to CAM for classification */,
MAX_ETH_VLAN_FILTER_MODE};
@@ -4937,7 +4937,7 @@ struct mac_configuration_entry
#define MAC_CONFIGURATION_ENTRY_RDMA_MAC_SHIFT 1
#define MAC_CONFIGURATION_ENTRY_VLAN_FILTERING_MODE (0x3<<2) /* BitField flags (use enum eth_vlan_filter_mode) */
#define MAC_CONFIGURATION_ENTRY_VLAN_FILTERING_MODE_SHIFT 2
-#define MAC_CONFIGURATION_ENTRY_OVERRIDE_VLAN_REMOVAL (0x1<<4) /* BitField flags BitField flags 0 - cant remove vlan 1 - can remove vlan. relevant only to everest1 */
+#define MAC_CONFIGURATION_ENTRY_OVERRIDE_VLAN_REMOVAL (0x1<<4) /* BitField flags BitField flags 0 - can't remove vlan 1 - can remove vlan. relevant only to everest1 */
#define MAC_CONFIGURATION_ENTRY_OVERRIDE_VLAN_REMOVAL_SHIFT 4
#define MAC_CONFIGURATION_ENTRY_BROADCAST (0x1<<5) /* BitField flags BitField flags 0 - not broadcast 1 - broadcast. relevant only to everest1 */
#define MAC_CONFIGURATION_ENTRY_BROADCAST_SHIFT 5
@@ -5024,7 +5024,7 @@ struct tstorm_eth_function_common_config
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY_SHIFT 3
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_MODE (0x7<<4) /* BitField config_flagsGeneral configuration flags RSS mode of operation (use enum eth_rss_mode) */
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_MODE_SHIFT 4
-#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_FILTERING_ENABLE (0x1<<7) /* BitField config_flagsGeneral configuration flags 0 - Dont filter by vlan, 1 - Filter according to the vlans specificied in mac_filter_config */
+#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_FILTERING_ENABLE (0x1<<7) /* BitField config_flagsGeneral configuration flags 0 - Don't filter by vlan, 1 - Filter according to the vlans specificied in mac_filter_config */
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_FILTERING_ENABLE_SHIFT 7
#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0 (0xFF<<8) /* BitField config_flagsGeneral configuration flags */
#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0_SHIFT 8
@@ -5634,7 +5634,7 @@ struct flow_control_configuration
struct function_start_data
{
uint8_t function_mode /* the function mode */;
- uint8_t allow_npar_tx_switching /* If set, inter-pf tx switching is allowed in Switch Independant function mode. (E2/E3 Only) */;
+ uint8_t allow_npar_tx_switching /* If set, inter-pf tx switching is allowed in Switch Independent function mode. (E2/E3 Only) */;
uint16_t sd_vlan_tag /* value of Vlan in case of switch depended multi-function mode */;
uint16_t vif_id /* value of VIF id in case of NIV multi-function mode */;
uint8_t path_id;
diff --git a/drivers/net/bnx2x/ecore_init.h b/drivers/net/bnx2x/ecore_init.h
index d25e2803a..4576c5657 100644
--- a/drivers/net/bnx2x/ecore_init.h
+++ b/drivers/net/bnx2x/ecore_init.h
@@ -304,7 +304,7 @@ static inline void ecore_dcb_config_qm(struct bnx2x_softc *sc, enum cos_mode mod
/*
- * congestion managment port init api description
+ * congestion management port init api description
* the api works as follows:
* the driver should pass the cmng_init_input struct, the port_init function
* will prepare the required internal ram structure which will be passed back
diff --git a/drivers/net/bnx2x/ecore_sp.c b/drivers/net/bnx2x/ecore_sp.c
index 22f2dc95f..ef7f9fea4 100644
--- a/drivers/net/bnx2x/ecore_sp.c
+++ b/drivers/net/bnx2x/ecore_sp.c
@@ -2676,7 +2676,7 @@ static void ecore_mcast_hdl_del(struct bnx2x_softc *sc,
* @cmd:
* @start_cnt: first line in the ramrod data that may be used
*
- * This function is called iff there is enough place for the current command in
+ * This function is called if there is enough place for the current command in
* the ramrod data.
* Returns number of lines filled in the ramrod data in total.
*/
@@ -2834,7 +2834,7 @@ static int ecore_mcast_setup_e2(struct bnx2x_softc *sc,
if (ECORE_LIST_IS_EMPTY(&o->pending_cmds_head))
o->clear_sched(o);
- /* The below may be TRUE iff there was enough room in ramrod
+ /* The below may be TRUE if there was enough room in ramrod
* data for all pending commands and for the current
* command. Otherwise the current command would have been added
* to the pending commands and p->mcast_list_len would have been
diff --git a/drivers/net/bnx2x/ecore_sp.h b/drivers/net/bnx2x/ecore_sp.h
index 9c1f55dfd..e7ec96e94 100644
--- a/drivers/net/bnx2x/ecore_sp.h
+++ b/drivers/net/bnx2x/ecore_sp.h
@@ -1116,10 +1116,10 @@ struct ecore_config_rss_params {
/* RSS hash values */
uint32_t rss_key[10];
- /* valid only iff ECORE_RSS_UPDATE_TOE is set */
+ /* valid only if ECORE_RSS_UPDATE_TOE is set */
uint16_t toe_rss_bitmap;
- /* valid iff ECORE_RSS_TUNNELING is set */
+ /* valid if ECORE_RSS_TUNNELING is set */
uint16_t tunnel_value;
uint16_t tunnel_mask;
};
@@ -1286,14 +1286,14 @@ struct rxq_pause_params {
uint16_t bd_th_hi;
uint16_t rcq_th_lo;
uint16_t rcq_th_hi;
- uint16_t sge_th_lo; /* valid iff ECORE_Q_FLG_TPA */
- uint16_t sge_th_hi; /* valid iff ECORE_Q_FLG_TPA */
+ uint16_t sge_th_lo; /* valid if ECORE_Q_FLG_TPA */
+ uint16_t sge_th_hi; /* valid if ECORE_Q_FLG_TPA */
uint16_t pri_map;
};
/* general */
struct ecore_general_setup_params {
- /* valid iff ECORE_Q_FLG_STATS */
+ /* valid if ECORE_Q_FLG_STATS */
uint8_t stat_id;
uint8_t spcl_id;
@@ -1312,19 +1312,19 @@ struct ecore_rxq_setup_params {
uint8_t fw_sb_id;
uint8_t cl_qzone_id;
- /* valid iff ECORE_Q_FLG_TPA */
+ /* valid if ECORE_Q_FLG_TPA */
uint16_t tpa_agg_sz;
uint8_t max_tpa_queues;
uint8_t rss_engine_id;
- /* valid iff ECORE_Q_FLG_MCAST */
+ /* valid if ECORE_Q_FLG_MCAST */
uint8_t mcast_engine_id;
uint8_t cache_line_log;
uint8_t sb_cq_index;
- /* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */
+ /* valid if BXN2X_Q_FLG_SILENT_VLAN_REM */
uint16_t silent_removal_value;
uint16_t silent_removal_mask;
};
@@ -1335,12 +1335,12 @@ struct ecore_txq_setup_params {
uint8_t fw_sb_id;
uint8_t sb_cq_index;
- uint8_t cos; /* valid iff ECORE_Q_FLG_COS */
+ uint8_t cos; /* valid if ECORE_Q_FLG_COS */
uint16_t traffic_type;
/* equals to the leading rss client id, used for TX classification*/
uint8_t tss_leading_cl_id;
- /* valid iff ECORE_Q_FLG_DEF_VLAN */
+ /* valid if ECORE_Q_FLG_DEF_VLAN */
uint16_t default_vlan;
};
@@ -1733,7 +1733,7 @@ void ecore_init_mcast_obj(struct bnx2x_softc *sc,
* the current command will be enqueued to the tail of the
* pending commands list.
*
- * Return: 0 is operation was successfull and there are no pending completions,
+ * Return: 0 is operation was successful and there are no pending completions,
* negative if there were errors, positive if there are pending
* completions.
*/
diff --git a/drivers/net/bnx2x/elink.c b/drivers/net/bnx2x/elink.c
index 9ffa7dc66..9d0f31364 100644
--- a/drivers/net/bnx2x/elink.c
+++ b/drivers/net/bnx2x/elink.c
@@ -2702,7 +2702,7 @@ static elink_status_t elink_eee_initial_config(struct elink_params *params,
{
vars->eee_status |= ((uint32_t) mode) << SHMEM_EEE_SUPPORTED_SHIFT;
- /* Propogate params' bits --> vars (for migration exposure) */
+ /* Propagate params' bits --> vars (for migration exposure) */
if (params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI)
vars->eee_status |= SHMEM_EEE_LPI_REQUESTED_BIT;
else
@@ -3450,7 +3450,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0},
};
PMD_DRV_LOG(DEBUG, "Enable Auto Negotiation for KR");
- /* Set to default registers that may be overriden by 10G force */
+ /* Set to default registers that may be overridden by 10G force */
for (i = 0; i < ARRAY_SIZE(reg_set); i++)
elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
@@ -4363,14 +4363,14 @@ static void elink_sync_link(struct elink_params *params,
switch (vars->link_status & LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
case ELINK_LINK_10THD:
vars->duplex = DUPLEX_HALF;
- /* Fall thru */
+ /* Fall through */
case ELINK_LINK_10TFD:
vars->line_speed = ELINK_SPEED_10;
break;
case ELINK_LINK_100TXHD:
vars->duplex = DUPLEX_HALF;
- /* Fall thru */
+ /* Fall through */
case ELINK_LINK_100T4:
case ELINK_LINK_100TXFD:
vars->line_speed = ELINK_SPEED_100;
@@ -4378,14 +4378,14 @@ static void elink_sync_link(struct elink_params *params,
case ELINK_LINK_1000THD:
vars->duplex = DUPLEX_HALF;
- /* Fall thru */
+ /* Fall through */
case ELINK_LINK_1000TFD:
vars->line_speed = ELINK_SPEED_1000;
break;
case ELINK_LINK_2500THD:
vars->duplex = DUPLEX_HALF;
- /* Fall thru */
+ /* Fall through */
case ELINK_LINK_2500TFD:
vars->line_speed = ELINK_SPEED_2500;
break;
@@ -6341,7 +6341,7 @@ elink_status_t elink_link_update(struct elink_params * params,
* hence its link is expected to be down
* - SECOND_PHY means that first phy should not be able
* to link up by itself (using configuration)
- * - DEFAULT should be overriden during initialiazation
+ * - DEFAULT should be overridden during initialization
*/
PMD_DRV_LOG(DEBUG, "Invalid link indication"
"mpc=0x%x. DISABLING LINK !!!",
@@ -12680,7 +12680,7 @@ static void elink_check_over_curr(struct elink_params *params,
vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG;
}
-/* Returns 0 if no change occured since last check; 1 otherwise. */
+/* Returns 0 if no change occurred since last check; 1 otherwise. */
static uint8_t elink_analyze_link_error(struct elink_params *params,
struct elink_vars *vars,
uint32_t status, uint32_t phy_flag,
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index 7b863d6ed..d2b75927c 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -905,7 +905,7 @@ bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev, uint8_t slave_id)
32 : RTE_MEMPOOL_CACHE_MAX_SIZE,
0, element_size, socket_id);
- /* Any memory allocation failure in initalization is critical because
+ /* Any memory allocation failure in initialization is critical because
* resources can't be free, so reinitialization is impossible. */
if (port->mbuf_pool == NULL) {
rte_panic("Slave %u: Failed to create memory pool '%s': %s\n",
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index 82959abc3..37f3d43bc 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -793,8 +793,8 @@ bond_ethdev_tx_burst_alb(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
uint16_t slave_bufs_pkts[RTE_MAX_ETHPORTS + 1] = { 0 };
/*
- * We create separate transmit buffers for update packets as they wont be
- * counted in num_tx_total.
+ * We create separate transmit buffers for update packets as they won't
+ * be counted in num_tx_total.
*/
struct rte_mbuf *update_bufs[RTE_MAX_ETHPORTS][ALB_HASH_TABLE_SIZE];
uint16_t update_bufs_pkts[RTE_MAX_ETHPORTS] = { 0 };
diff --git a/drivers/net/bonding/rte_eth_bond_private.h b/drivers/net/bonding/rte_eth_bond_private.h
index c8db09005..378832e45 100644
--- a/drivers/net/bonding/rte_eth_bond_private.h
+++ b/drivers/net/bonding/rte_eth_bond_private.h
@@ -184,7 +184,7 @@ extern const struct eth_dev_ops default_dev_ops;
int
check_for_bonded_ethdev(const struct rte_eth_dev *eth_dev);
-/* Search given slave array to find possition of given id.
+/* Search given slave array to find position of given id.
* Return slave pos or slaves_count if not found. */
static inline uint8_t
find_slave_by_id(uint8_t *slaves, uint8_t slaves_count, uint8_t slave_id) {
diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c
index 1f230cd50..5b88b2811 100644
--- a/drivers/net/cxgbe/cxgbe_main.c
+++ b/drivers/net/cxgbe/cxgbe_main.c
@@ -575,7 +575,7 @@ static int adap_init0_config(struct adapter *adapter, int reset)
/*
* Return successfully and note that we're operating with parameters
* not supplied by the driver, rather than from hard-wired
- * initialization constants burried in the driver.
+ * initialization constants buried in the driver.
*/
dev_info(adapter,
"Successfully configured using Firmware Configuration File \"%s\", version %#x, computed checksum %#x\n",
diff --git a/drivers/net/cxgbe/sge.c b/drivers/net/cxgbe/sge.c
index 2f9e12c9e..b6aecd605 100644
--- a/drivers/net/cxgbe/sge.c
+++ b/drivers/net/cxgbe/sge.c
@@ -388,7 +388,7 @@ static unsigned int refill_fl_usembufs(struct adapter *adap, struct sge_fl *q,
struct rte_pktmbuf_pool_private *mbp_priv;
u8 jumbo_en = rxq->rspq.eth_dev->data->dev_conf.rxmode.jumbo_frame;
- /* Use jumbo mtu buffers iff mbuf data room size can fit jumbo data. */
+ /* Use jumbo mtu buffers if mbuf data room size can fit jumbo data. */
mbp_priv = rte_mempool_get_priv(rxq->rspq.mb_pool);
if (jumbo_en &&
((mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM) >= 9000))
@@ -591,7 +591,7 @@ static inline unsigned int calc_tx_flits(const struct rte_mbuf *m)
* Write Header (incorporated as part of the cpl_tx_pkt_lso and
* cpl_tx_pkt structures), followed by either a TX Packet Write CPL
* message or, if we're doing a Large Send Offload, an LSO CPL message
- * with an embeded TX Packet Write CPL message.
+ * with an embedded TX Packet Write CPL message.
*/
flits = sgl_len(m->nb_segs);
if (m->tso_segsz)
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index d0262418d..323a4aad2 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1225,7 +1225,7 @@ int enic_set_mtu(struct enic *enic, uint16_t new_mtu)
}
}
- /* replace Rx funciton with a no-op to avoid getting stale pkts */
+ /* replace Rx function with a no-op to avoid getting stale pkts */
eth_dev->rx_pkt_burst = enic_dummy_recv_pkts;
rte_mb();
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index c18a93b2b..a34d057aa 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -74,7 +74,7 @@
/* Maximun number of capability elements */
#define I40E_MAX_CAP_ELE_NUM 128
-/* Wait count and inteval */
+/* Wait count and interval */
#define I40E_CHK_Q_ENA_COUNT 1000
#define I40E_CHK_Q_ENA_INTERVAL_US 1000
@@ -5710,16 +5710,16 @@ i40e_dev_handle_vfr_event(struct rte_eth_dev *dev)
index = abs_vf_id / I40E_UINT32_BIT_SIZE;
offset = abs_vf_id % I40E_UINT32_BIT_SIZE;
val = I40E_READ_REG(hw, I40E_GLGEN_VFLRSTAT(index));
- /* VFR event occured */
+ /* VFR event occurred */
if (val & (0x1 << offset)) {
int ret;
/* Clear the event first */
I40E_WRITE_REG(hw, I40E_GLGEN_VFLRSTAT(index),
(0x1 << offset));
- PMD_DRV_LOG(INFO, "VF %u reset occured", abs_vf_id);
+ PMD_DRV_LOG(INFO, "VF %u reset occurred", abs_vf_id);
/**
- * Only notify a VF reset event occured,
+ * Only notify a VF reset event occurred,
* don't trigger another SW reset
*/
ret = i40e_pf_host_vf_reset(&pf->vfs[i], 0);
@@ -7436,7 +7436,7 @@ i40e_pf_config_rss(struct i40e_pf *pf)
/*
* If both VMDQ and RSS enabled, not all of PF queues are configured.
- * It's necessary to calulate the actual PF queues that are configured.
+ * It's necessary to calculate the actual PF queues that are configured.
*/
if (pf->dev_data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_VMDQ_FLAG)
num = i40e_pf_calc_configured_queues_num(pf);
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 2ff8282f7..50e3deda6 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -405,7 +405,7 @@ enum I40E_VF_STATE {
struct i40e_pf_vf {
struct i40e_pf *pf;
struct i40e_vsi *vsi;
- enum I40E_VF_STATE state; /* The number of queue pairs availiable */
+ enum I40E_VF_STATE state; /* The number of queue pairs available */
uint16_t vf_idx; /* VF index in pf->vfs */
uint16_t lan_nb_qps; /* Actual queues allocated */
uint16_t reset_cnt; /* Total vf reset times */
diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index 351cb94dd..26aa6dc57 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -1608,7 +1608,7 @@ i40e_dev_rx_queue_stop(struct rte_eth_dev *dev, uint16_t rx_queue_id)
rxq = dev->data->rx_queues[rx_queue_id];
/*
- * rx_queue_id is queue id aplication refers to, while
+ * rx_queue_id is queue id application refers to, while
* rxq->reg_idx is the real queue index.
*/
err = i40e_switch_rx_queue(hw, rxq->reg_idx, FALSE);
@@ -1639,7 +1639,7 @@ i40e_dev_tx_queue_start(struct rte_eth_dev *dev, uint16_t tx_queue_id)
txq = dev->data->tx_queues[tx_queue_id];
/*
- * tx_queue_id is queue id aplication refers to, while
+ * tx_queue_id is queue id application refers to, while
* rxq->reg_idx is the real queue index.
*/
err = i40e_switch_tx_queue(hw, txq->reg_idx, TRUE);
@@ -1664,7 +1664,7 @@ i40e_dev_tx_queue_stop(struct rte_eth_dev *dev, uint16_t tx_queue_id)
txq = dev->data->tx_queues[tx_queue_id];
/*
- * tx_queue_id is queue id aplication refers to, while
+ * tx_queue_id is queue id application refers to, while
* txq->reg_idx is the real queue index.
*/
err = i40e_switch_tx_queue(hw, txq->reg_idx, FALSE);
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index b576a6f4b..05de4a384 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -72,7 +72,7 @@
#endif
#define IXGBE_HWSTRIP_BITMAP_SIZE (IXGBE_MAX_RX_QUEUE_NUM / (sizeof(uint32_t) * NBBY))
-/* EITR Inteval is in 2048ns uinits for 1G and 10G link */
+/* EITR Interval is in 2048ns uinits for 1G and 10G link */
#define IXGBE_EITR_INTERVAL_UNIT_NS 2048
#define IXGBE_EITR_ITR_INT_SHIFT 3
#define IXGBE_EITR_INTERVAL_US(us) \
diff --git a/drivers/net/ixgbe/ixgbe_fdir.c b/drivers/net/ixgbe/ixgbe_fdir.c
index 7f6c7b58f..ae3035057 100644
--- a/drivers/net/ixgbe/ixgbe_fdir.c
+++ b/drivers/net/ixgbe/ixgbe_fdir.c
@@ -654,7 +654,7 @@ ixgbe_fdir_configure(struct rte_eth_dev *dev)
/*
* The defaults in the HW for RX PB 1-7 are not zero and so should be
- * intialized to zero for non DCB mode otherwise actual total RX PB
+ * initialized to zero for non DCB mode otherwise actual total RX PB
* would be bigger than programmed and filter space would run into
* the PB 0 region.
*/
diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index 5479fb366..4b08c71fb 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -1173,7 +1173,7 @@ nfp_net_rx_queue_count(struct rte_eth_dev *dev, uint16_t queue_idx)
* Other PMDs are just checking the DD bit in intervals of 4
* descriptors and counting all four if the first has the DD
* bit on. Of course, this is not accurate but can be good for
- * perfomance. But ideally that should be done in descriptors
+ * performance. But ideally that should be done in descriptors
* chunks belonging to the same cache line
*/
diff --git a/drivers/net/qede/qede_rxtx.c b/drivers/net/qede/qede_rxtx.c
index baea1bb04..3751e6bd0 100644
--- a/drivers/net/qede/qede_rxtx.c
+++ b/drivers/net/qede/qede_rxtx.c
@@ -1411,7 +1411,7 @@ qede_xmit_prep_pkts(__rte_unused void *p_txq, struct rte_mbuf **tx_pkts,
break;
}
#endif
- /* TBD: pseudo csum calcuation required iff
+ /* TBD: pseudo csum calcuation required if
* ETH_TX_DATA_2ND_BD_L4_PSEUDO_CSUM_MODE not set?
*/
ret = rte_net_intel_cksum_prepare(m);
@@ -1600,7 +1600,7 @@ qede_xmit_pkts(void *p_txq, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
(hdr_size +
rte_mbuf_data_dma_addr(mbuf)),
mbuf->data_len - hdr_size);
- /* TBD: check pseudo csum iff tx_prepare not called? */
+ /* TBD: check pseudo csum if tx_prepare not called? */
if (ipv6_ext_flg) {
bd2->data.bitfields1 |=
ETH_L4_PSEUDO_CSUM_ZERO_LENGTH <<
@@ -1711,7 +1711,7 @@ int qede_dev_start(struct rte_eth_dev *eth_dev)
}
/* Newer SR-IOV PF driver expects RX/TX queues to be started before
- * enabling RSS. Hence RSS configuration is deferred upto this point.
+ * enabling RSS. Hence RSS configuration is deferred up to this point.
* Also, we would like to retain similar behavior in PF case, so we
* don't do PF/VF specific check here.
*/
diff --git a/drivers/net/ring/rte_eth_ring.c b/drivers/net/ring/rte_eth_ring.c
index 87d22581b..ac4143562 100644
--- a/drivers/net/ring/rte_eth_ring.c
+++ b/drivers/net/ring/rte_eth_ring.c
@@ -450,7 +450,7 @@ static int parse_kvlist (const char *key __rte_unused, const char *value, void *
ret = -EINVAL;
if (!name) {
- RTE_LOG(WARNING, PMD, "command line paramter is empty for ring pmd!\n");
+ RTE_LOG(WARNING, PMD, "command line parameter is empty for ring pmd!\n");
goto out;
}
diff --git a/drivers/net/sfc/sfc_rx.c b/drivers/net/sfc/sfc_rx.c
index 2ecd6f26e..97175e5f9 100644
--- a/drivers/net/sfc/sfc_rx.c
+++ b/drivers/net/sfc/sfc_rx.c
@@ -292,7 +292,7 @@ sfc_efx_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
if (desc_flags & EFX_PKT_CONT) {
/* The packet is scattered, more fragments to come */
scatter_pkt = m;
- /* Futher fragments have no prefix */
+ /* Further fragments have no prefix */
prefix_size = 0;
continue;
}
diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
index e44de027d..40f79ced5 100644
--- a/drivers/net/tap/rte_eth_tap.c
+++ b/drivers/net/tap/rte_eth_tap.c
@@ -1296,7 +1296,7 @@ rte_pmd_tap_probe(struct rte_vdev_device *dev)
memset(remote_iface, 0, RTE_ETH_NAME_MAX_LEN);
if (params && (params[0] != '\0')) {
- RTE_LOG(DEBUG, PMD, "paramaters (%s)\n", params);
+ RTE_LOG(DEBUG, PMD, "parameters (%s)\n", params);
kvlist = rte_kvargs_parse(params, valid_arguments);
if (kvlist) {
diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
index 2152029b5..f472469e9 100644
--- a/drivers/net/thunderx/nicvf_ethdev.c
+++ b/drivers/net/thunderx/nicvf_ethdev.c
@@ -2079,7 +2079,7 @@ nicvf_eth_dev_init(struct rte_eth_dev *eth_dev)
goto fail;
}
- /* Detach port by returning postive error number */
+ /* Detach port by returning positive error number */
return ENOTSUP;
}
diff --git a/examples/Makefile b/examples/Makefile
index 6298626b7..c0e9c3be6 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -32,7 +32,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/bond/main.c b/examples/bond/main.c
index 9a4ec8073..dc6067667 100644
--- a/examples/bond/main.c
+++ b/examples/bond/main.c
@@ -550,7 +550,7 @@ static void cmd_help_parsed(__attribute__((unused)) void *parsed_result,
{
cmdline_printf(cl,
"ALB - link bonding mode 6 example\n"
- "send IP - sends one ARPrequest thru bonding for IP.\n"
+ "send IP - sends one ARPrequest through bonding for IP.\n"
"start - starts listening ARPs.\n"
"stop - stops lcore_main.\n"
"show - shows some bond info: ex. active slaves etc.\n"
diff --git a/examples/cmdline/Makefile b/examples/cmdline/Makefile
index 9ebe43558..5155a6c80 100644
--- a/examples/cmdline/Makefile
+++ b/examples/cmdline/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/distributor/Makefile b/examples/distributor/Makefile
index 6a5badaa0..404993ebf 100644
--- a/examples/distributor/Makefile
+++ b/examples/distributor/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ethtool/ethtool-app/main.c b/examples/ethtool/ethtool-app/main.c
index 6d50d4639..f79b9621b 100644
--- a/examples/ethtool/ethtool-app/main.c
+++ b/examples/ethtool/ethtool-app/main.c
@@ -264,7 +264,7 @@ int main(int argc, char **argv)
uint32_t id_core;
uint32_t cnt_ports;
- /* Init runtime enviornment */
+ /* Init runtime environment */
cnt_args_parsed = rte_eal_init(argc, argv);
if (cnt_args_parsed < 0)
rte_exit(EXIT_FAILURE, "rte_eal_init(): Failed");
diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c
index 7e4652063..fabfcb2ba 100644
--- a/examples/ethtool/lib/rte_ethtool.c
+++ b/examples/ethtool/lib/rte_ethtool.c
@@ -64,7 +64,7 @@ rte_ethtool_get_drvinfo(uint8_t port_id, struct ethtool_drvinfo *drvinfo)
printf("firmware version get error: (%s)\n", strerror(-ret));
else if (ret > 0)
printf("Insufficient fw version buffer size, "
- "the minimun size should be %d\n", ret);
+ "the minimum size should be %d\n", ret);
memset(&dev_info, 0, sizeof(dev_info));
rte_eth_dev_info_get(port_id, &dev_info);
diff --git a/examples/ethtool/lib/rte_ethtool.h b/examples/ethtool/lib/rte_ethtool.h
index 2e79d4535..18f44404b 100644
--- a/examples/ethtool/lib/rte_ethtool.h
+++ b/examples/ethtool/lib/rte_ethtool.h
@@ -365,7 +365,7 @@ int rte_ethtool_net_vlan_rx_kill_vid(uint8_t port_id, uint16_t vid);
int rte_ethtool_net_set_rx_mode(uint8_t port_id);
/**
- * Getting ring paramaters for Ethernet device.
+ * Getting ring parameters for Ethernet device.
*
* @param port_id
* The port identifier of the Ethernet device.
@@ -384,7 +384,7 @@ int rte_ethtool_get_ringparam(uint8_t port_id,
struct ethtool_ringparam *ring_param);
/**
- * Setting ring paramaters for Ethernet device.
+ * Setting ring parameters for Ethernet device.
*
* @param port_id
* The port identifier of the Ethernet device.
diff --git a/examples/exception_path/Makefile b/examples/exception_path/Makefile
index 76706c124..d16f74f6f 100644
--- a/examples/exception_path/Makefile
+++ b/examples/exception_path/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/helloworld/Makefile b/examples/helloworld/Makefile
index d2cca7a70..c83ec01e8 100644
--- a/examples/helloworld/Makefile
+++ b/examples/helloworld/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ip_fragmentation/Makefile b/examples/ip_fragmentation/Makefile
index c321e6a13..4bc01abb9 100644
--- a/examples/ip_fragmentation/Makefile
+++ b/examples/ip_fragmentation/Makefile
@@ -34,7 +34,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index 71c1d12fc..654b315cf 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -1020,7 +1020,7 @@ main(int argc, char **argv)
if (check_ptype(portid) == 0) {
rte_eth_add_rx_callback(portid, 0, cb_parse_ptype, NULL);
- printf("Add Rx callback funciton to detect L3 packet type by SW :"
+ printf("Add Rx callback function to detect L3 packet type by SW :"
" port = %d\n", portid);
}
}
diff --git a/examples/ip_reassembly/Makefile b/examples/ip_reassembly/Makefile
index d9539a3a9..85c64a38b 100644
--- a/examples/ip_reassembly/Makefile
+++ b/examples/ip_reassembly/Makefile
@@ -34,7 +34,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ipv4_multicast/Makefile b/examples/ipv4_multicast/Makefile
index 44f0a3bb4..1f7c53af3 100644
--- a/examples/ipv4_multicast/Makefile
+++ b/examples/ipv4_multicast/Makefile
@@ -34,7 +34,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/kni/Makefile b/examples/kni/Makefile
index 6800dd5c6..08a4f0c57 100644
--- a/examples/kni/Makefile
+++ b/examples/kni/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l2fwd/Makefile b/examples/l2fwd/Makefile
index 78feeeb83..8896ab452 100644
--- a/examples/l2fwd/Makefile
+++ b/examples/l2fwd/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd-acl/Makefile b/examples/l3fwd-acl/Makefile
index a3473a83e..3cd299f1b 100644
--- a/examples/l3fwd-acl/Makefile
+++ b/examples/l3fwd-acl/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd-power/Makefile b/examples/l3fwd-power/Makefile
index 783772a79..9c4f44300 100644
--- a/examples/l3fwd-power/Makefile
+++ b/examples/l3fwd-power/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd-vf/Makefile b/examples/l3fwd-vf/Makefile
index d97611cfc..989faf032 100644
--- a/examples/l3fwd-vf/Makefile
+++ b/examples/l3fwd-vf/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd/Makefile b/examples/l3fwd/Makefile
index 5ce0ce05a..d99a43ade 100644
--- a/examples/l3fwd/Makefile
+++ b/examples/l3fwd/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd/l3fwd_sse.h b/examples/l3fwd/l3fwd_sse.h
index fa9c4829d..4334be376 100644
--- a/examples/l3fwd/l3fwd_sse.h
+++ b/examples/l3fwd/l3fwd_sse.h
@@ -158,7 +158,7 @@ processx4_step3(struct rte_mbuf *pkt[FWDSTEP], uint16_t dst_port[FWDSTEP])
* Suppose we have array of destionation ports:
* dst_port[] = {a, b, c, d,, e, ... }
* dp1 should contain: <a, b, c, d>, dp2: <b, c, d, e>.
- * We doing 4 comparisions at once and the result is 4 bit mask.
+ * We doing 4 comparisons at once and the result is 4 bit mask.
* This mask is used as an index into prebuild array of pnum values.
*/
static inline uint16_t *
diff --git a/examples/link_status_interrupt/Makefile b/examples/link_status_interrupt/Makefile
index 9ecc7fc4c..d5ee073a4 100644
--- a/examples/link_status_interrupt/Makefile
+++ b/examples/link_status_interrupt/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/load_balancer/Makefile b/examples/load_balancer/Makefile
index 2c5fd9b06..f656e51ce 100644
--- a/examples/load_balancer/Makefile
+++ b/examples/load_balancer/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/Makefile b/examples/multi_process/Makefile
index 6b315cc0e..696633b93 100644
--- a/examples/multi_process/Makefile
+++ b/examples/multi_process/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/client_server_mp/Makefile b/examples/multi_process/client_server_mp/Makefile
index 89cc6bf8f..feb508a45 100644
--- a/examples/multi_process/client_server_mp/Makefile
+++ b/examples/multi_process/client_server_mp/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/client_server_mp/mp_client/Makefile b/examples/multi_process/client_server_mp/mp_client/Makefile
index 2688fed02..2ee8cd2c7 100644
--- a/examples/multi_process/client_server_mp/mp_client/Makefile
+++ b/examples/multi_process/client_server_mp/mp_client/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
include $(RTE_SDK)/mk/rte.vars.mk
# binary name
diff --git a/examples/multi_process/client_server_mp/mp_server/Makefile b/examples/multi_process/client_server_mp/mp_server/Makefile
index c29e4783e..5552999b5 100644
--- a/examples/multi_process/client_server_mp/mp_server/Makefile
+++ b/examples/multi_process/client_server_mp/mp_server/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/l2fwd_fork/Makefile b/examples/multi_process/l2fwd_fork/Makefile
index ff257a35e..11ae8ff42 100644
--- a/examples/multi_process/l2fwd_fork/Makefile
+++ b/examples/multi_process/l2fwd_fork/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/l2fwd_fork/flib.h b/examples/multi_process/l2fwd_fork/flib.h
index 711e3b6d0..1064c9bbd 100644
--- a/examples/multi_process/l2fwd_fork/flib.h
+++ b/examples/multi_process/l2fwd_fork/flib.h
@@ -120,7 +120,7 @@ int flib_register_slave_exit_notify(unsigned slave_id,
/**
* Assign a lcore ID to non-slave thread. Non-slave thread refers to thread that
* not created by function rte_eal_remote_launch or rte_eal_mp_remote_launch.
- * These threads can either bind lcore or float among differnt lcores.
+ * These threads can either bind lcore or float among different lcores.
* This lcore ID will be unique in multi-thread or multi-process DPDK running
* environment, then it can benefit from using the cache mechanism provided in
* mempool library.
diff --git a/examples/multi_process/simple_mp/Makefile b/examples/multi_process/simple_mp/Makefile
index 31ec0c806..7ac96f2f1 100644
--- a/examples/multi_process/simple_mp/Makefile
+++ b/examples/multi_process/simple_mp/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/symmetric_mp/Makefile b/examples/multi_process/symmetric_mp/Makefile
index c789f3c9f..77d90c68d 100644
--- a/examples/multi_process/symmetric_mp/Makefile
+++ b/examples/multi_process/symmetric_mp/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/netmap_compat/Makefile b/examples/netmap_compat/Makefile
index 52d808696..fd4630aff 100644
--- a/examples/netmap_compat/Makefile
+++ b/examples/netmap_compat/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/netmap_compat/bridge/Makefile b/examples/netmap_compat/bridge/Makefile
index 1d4ddfffc..ce38a3455 100644
--- a/examples/netmap_compat/bridge/Makefile
+++ b/examples/netmap_compat/bridge/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define the RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/netmap_compat/lib/compat_netmap.c b/examples/netmap_compat/lib/compat_netmap.c
index 112c551f1..d9b40513d 100644
--- a/examples/netmap_compat/lib/compat_netmap.c
+++ b/examples/netmap_compat/lib/compat_netmap.c
@@ -168,7 +168,7 @@ mbuf_to_slot(struct rte_mbuf *mbuf, struct netmap_ring *r, uint32_t index)
/**
* Given a Netmap ring and a slot index for that ring, construct a dpdk mbuf
* from the data held in the buffer associated with the slot.
- * Allocation/deallocation of the dpdk mbuf are the responsability of the
+ * Allocation/deallocation of the dpdk mbuf are the responsibility of the
* caller.
* Note that mbuf chains are not supported.
*/
diff --git a/examples/performance-thread/common/lthread_mutex.c b/examples/performance-thread/common/lthread_mutex.c
index c1bc62710..c06d3d513 100644
--- a/examples/performance-thread/common/lthread_mutex.c
+++ b/examples/performance-thread/common/lthread_mutex.c
@@ -173,7 +173,7 @@ int lthread_mutex_lock(struct lthread_mutex *m)
return 0;
}
-/* try to lock a mutex but dont block */
+/* try to lock a mutex but don't block */
int lthread_mutex_trylock(struct lthread_mutex *m)
{
struct lthread *lt = THIS_LTHREAD;
diff --git a/examples/performance-thread/l3fwd-thread/main.c b/examples/performance-thread/l3fwd-thread/main.c
index ac85a369f..f2a0fa90d 100644
--- a/examples/performance-thread/l3fwd-thread/main.c
+++ b/examples/performance-thread/l3fwd-thread/main.c
@@ -1604,7 +1604,7 @@ processx4_step3(struct rte_mbuf *pkt[FWDSTEP], uint16_t dst_port[FWDSTEP])
* Suppose we have array of destionation ports:
* dst_port[] = {a, b, c, d,, e, ... }
* dp1 should contain: <a, b, c, d>, dp2: <b, c, d, e>.
- * We doing 4 comparisions at once and the result is 4 bit mask.
+ * We doing 4 comparisons at once and the result is 4 bit mask.
* This mask is used as an index into prebuild array of pnum values.
*/
static inline uint16_t *
diff --git a/examples/qos_meter/Makefile b/examples/qos_meter/Makefile
index 5113a1298..de1f12ce0 100644
--- a/examples/qos_meter/Makefile
+++ b/examples/qos_meter/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/qos_sched/Makefile b/examples/qos_sched/Makefile
index e41ac500f..56829c215 100644
--- a/examples/qos_sched/Makefile
+++ b/examples/qos_sched/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/quota_watermark/Makefile b/examples/quota_watermark/Makefile
index 17fe473b0..40a01fa47 100644
--- a/examples/quota_watermark/Makefile
+++ b/examples/quota_watermark/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/quota_watermark/qw/Makefile b/examples/quota_watermark/qw/Makefile
index fac9328d0..627897ce4 100644
--- a/examples/quota_watermark/qw/Makefile
+++ b/examples/quota_watermark/qw/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/quota_watermark/qwctl/Makefile b/examples/quota_watermark/qwctl/Makefile
index 1ca2f1e96..e0f0083d0 100644
--- a/examples/quota_watermark/qwctl/Makefile
+++ b/examples/quota_watermark/qwctl/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/timer/Makefile b/examples/timer/Makefile
index af12b7ba4..7db48ec6b 100644
--- a/examples/timer/Makefile
+++ b/examples/timer/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
index af7be99a9..add9f27bb 100644
--- a/examples/vhost/Makefile
+++ b/examples/vhost/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vhost_xen/Makefile b/examples/vhost_xen/Makefile
index 47e14898a..ad2466aa7 100644
--- a/examples/vhost_xen/Makefile
+++ b/examples/vhost_xen/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vhost_xen/main.c b/examples/vhost_xen/main.c
index d9ef140f7..979fa1d0f 100644
--- a/examples/vhost_xen/main.c
+++ b/examples/vhost_xen/main.c
@@ -534,7 +534,7 @@ gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa)
/*
* This function adds buffers to the virtio devices RX virtqueue. Buffers can
* be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that were succesfully
+ * count is returned to indicate the number of packets that were successfully
* added to the RX queue.
*/
static inline uint32_t __attribute__((always_inline))
diff --git a/examples/vhost_xen/xenstore_parse.c b/examples/vhost_xen/xenstore_parse.c
index 26d243208..ab089f1b7 100644
--- a/examples/vhost_xen/xenstore_parse.c
+++ b/examples/vhost_xen/xenstore_parse.c
@@ -293,7 +293,7 @@ parse_gntnode(int dom_id, char *path)
}
/*
- * This function maps grant node of vring or mbuf pool to a continous virtual address space,
+ * This function maps grant node of vring or mbuf pool to a continuous virtual address space,
* and returns mapped address, pfn array, index array
* @param gntnode
* Pointer to grant node
@@ -460,7 +460,7 @@ cleanup_mempool(struct xen_mempool *mempool)
/*
* process mempool node idx#_mempool_gref, idx = 0, 1, 2...
- * untill we encounter a node that doesn't exist.
+ * until we encounter a node that doesn't exist.
*/
int
parse_mempoolnode(struct xen_guest *guest)
diff --git a/examples/vmdq/Makefile b/examples/vmdq/Makefile
index 198e3bfec..501728222 100644
--- a/examples/vmdq/Makefile
+++ b/examples/vmdq/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vmdq_dcb/Makefile b/examples/vmdq_dcb/Makefile
index 8c51131b9..0c200a980 100644
--- a/examples/vmdq_dcb/Makefile
+++ b/examples/vmdq_dcb/Makefile
@@ -33,7 +33,7 @@ ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
-# Default target, can be overriden by command line or environment
+# Default target, can be overridden by command line or environment
RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/lib/librte_bitratestats/rte_bitrate.c b/lib/librte_bitratestats/rte_bitrate.c
index 193aa690e..3ceb35166 100644
--- a/lib/librte_bitratestats/rte_bitrate.c
+++ b/lib/librte_bitratestats/rte_bitrate.c
@@ -112,7 +112,7 @@ rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
port_data->peak_ibits = cnt_bits;
delta = cnt_bits;
delta -= port_data->ewma_ibits;
- /* The +-50 fixes integer rounding during divison */
+ /* The +-50 fixes integer rounding during division */
if (delta > 0)
delta = (delta * alpha_percent + 50) / 100;
else
diff --git a/lib/librte_compat/rte_compat.h b/lib/librte_compat/rte_compat.h
index 1c3c8d521..41e8032ba 100644
--- a/lib/librte_compat/rte_compat.h
+++ b/lib/librte_compat/rte_compat.h
@@ -39,7 +39,7 @@
* When a symol is exported from a library to provide an API, it also provides a
* calling convention (ABI) that is embodied in its name, return type,
* arguments, etc. On occasion that function may need to change to accommodate
- * new functionality, behavior, etc. When that occurs, it is desireable to
+ * new functionality, behavior, etc. When that occurs, it is desirable to
* allow for backwards compatibility for a time with older binaries that are
* dynamically linked to the dpdk. To support that, the __vsym and
* VERSION_SYMBOL macros are created. They, in conjunction with the
diff --git a/lib/librte_eal/common/eal_common_log.c b/lib/librte_eal/common/eal_common_log.c
index ddf65b7fd..41ea92472 100644
--- a/lib/librte_eal/common/eal_common_log.c
+++ b/lib/librte_eal/common/eal_common_log.c
@@ -173,13 +173,13 @@ rte_log_set_level_regexp(const char *pattern, uint32_t level)
return 0;
}
-/* get the current loglevel for the message beeing processed */
+/* get the current loglevel for the message being processed */
int rte_log_cur_msg_loglevel(void)
{
return RTE_PER_LCORE(log_cur_msg).loglevel;
}
-/* get the current logtype for the message beeing processed */
+/* get the current logtype for the message being processed */
int rte_log_cur_msg_logtype(void)
{
return RTE_PER_LCORE(log_cur_msg).logtype;
diff --git a/lib/librte_eal/common/include/rte_alarm.h b/lib/librte_eal/common/include/rte_alarm.h
index 4012cd67e..c275be18b 100644
--- a/lib/librte_eal/common/include/rte_alarm.h
+++ b/lib/librte_eal/common/include/rte_alarm.h
@@ -91,7 +91,7 @@ int rte_eal_alarm_set(uint64_t us, rte_eal_alarm_callback cb, void *cb_arg);
* the number of canceled alarm callback functions
* - value greater or equal 0 and rte_errno set to EINPROGRESS, at least one
* alarm could not be canceled because cancellation was requested from alarm
- * callback context. Returned value is the number of succesfuly canceled
+ * callback context. Returned value is the number of successfully canceled
* alarm callbacks
* - 0 and rte_errno set to ENOENT - no alarm found
* - -1 and rte_errno set to EINVAL - invalid parameter (NULL callback)
diff --git a/lib/librte_eal/common/include/rte_bus.h b/lib/librte_eal/common/include/rte_bus.h
index 7c3696926..5f47b829b 100644
--- a/lib/librte_eal/common/include/rte_bus.h
+++ b/lib/librte_eal/common/include/rte_bus.h
@@ -58,7 +58,7 @@ TAILQ_HEAD(rte_bus_list, rte_bus);
/**
* Bus specific scan for devices attached on the bus.
- * For each bus object, the scan would be reponsible for finding devices and
+ * For each bus object, the scan would be responsible for finding devices and
* adding them to its private device list.
*
* A bus should mandatorily implement this method.
diff --git a/lib/librte_eal/common/include/rte_malloc.h b/lib/librte_eal/common/include/rte_malloc.h
index 008ce134a..61aac322b 100644
--- a/lib/librte_eal/common/include/rte_malloc.h
+++ b/lib/librte_eal/common/include/rte_malloc.h
@@ -327,7 +327,7 @@ rte_malloc_set_limit(const char *type, size_t max);
* rte_malloc
*
* @param addr
- * Adress obtained from a previous rte_malloc call
+ * Address obtained from a previous rte_malloc call
* @return
* NULL on error
* otherwise return physical address of the buffer
diff --git a/lib/librte_eal/common/include/rte_time.h b/lib/librte_eal/common/include/rte_time.h
index 28c6274c4..373c41acc 100644
--- a/lib/librte_eal/common/include/rte_time.h
+++ b/lib/librte_eal/common/include/rte_time.h
@@ -52,7 +52,7 @@ struct rte_timecounter {
uint64_t nsec_mask;
/** Sub-nanoseconds count. */
uint64_t nsec_frac;
- /** Bitmask for two's complement substraction of non-64 bit counters. */
+ /** Bitmask for two's complement subtraction of non-64 bit counters. */
uint64_t cc_mask;
/** Cycle to nanosecond divisor (power of two). */
uint32_t cc_shift;
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
index 2be131959..aa9d96eda 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
@@ -214,7 +214,7 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
intr_idx = VFIO_PCI_NUM_IRQS;
/* get interrupt type from internal config (MSI-X by default, can be
- * overriden from the command line
+ * overridden from the command line
*/
switch (internal_config.vfio_intr_mode) {
case RTE_INTR_MODE_MSIX:
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_82575.c b/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_82575.c
index d558af204..1c30d12b0 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_82575.c
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_82575.c
@@ -1357,7 +1357,7 @@ static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw,
* @hw: pointer to the HW structure
*
* In the case of serdes shut down sfp and PCS on driver unload
- * when management pass thru is not enabled.
+ * when management pass through is not enabled.
**/
void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw)
{
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
index 5f1f3a6b5..99338c5c8 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
@@ -1133,7 +1133,7 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
/* initialize pointer to rings */
ring = q_vector->ring;
- /* intialize ITR */
+ /* initialize ITR */
if (rxr_count) {
/* rx or rx/tx vector */
if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3)
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h b/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
index 4c52da3c1..e0a035423 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
@@ -1165,7 +1165,7 @@ static inline u32 _kc_netif_msg_init(int debug_value, int default_msg_enable_bit
#define pci_register_driver pci_module_init
/*
- * Most of the dma compat code is copied/modifed from the 2.4.37
+ * Most of the dma compat code is copied/modified from the 2.4.37
* /include/linux/libata-compat.h header file
*/
/* These definitions mirror those in pci.h, so they can be used
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_api.c b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_api.c
index f00fe7969..4808d06ec 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_api.c
+++ b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_api.c
@@ -718,7 +718,7 @@ s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
* @vmdq: VMDq pool to assign
*
* Puts an ethernet address into a receive address register, or
- * finds the rar that it is aleady in; adds to the pool list
+ * finds the rar that it is already in; adds to the pool list
**/
s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
{
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_common.c b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_common.c
index 88b33fa0d..2c861de5d 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_common.c
+++ b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_common.c
@@ -3007,7 +3007,7 @@ u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
* @vmdq: VMDq pool to assign
*
* Puts an ethernet address into a receive address register, or
- * finds the rar that it is aleady in; adds to the pool list
+ * finds the rar that it is already in; adds to the pool list
**/
s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
{
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/kcompat.h b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/kcompat.h
index 4c7a64086..f62a7b56e 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/kcompat.h
+++ b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/kcompat.h
@@ -1108,7 +1108,7 @@ static inline u32 _kc_netif_msg_init(int debug_value, int default_msg_enable_bit
#define pci_register_driver pci_module_init
/*
- * Most of the dma compat code is copied/modifed from the 2.4.37
+ * Most of the dma compat code is copied/modified from the 2.4.37
* /include/linux/libata-compat.h header file
*/
/* These definitions mirror those in pci.h, so they can be used
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 0f38b45f8..1bc74ce94 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -2358,7 +2358,7 @@ rte_eth_xstats_get_names_by_id(uint8_t port_id,
* @param port_id
* The port identifier of the Ethernet device.
* @param ids
- * A pointer to an ids array passed by application. This tells wich
+ * A pointer to an ids array passed by application. This tells which
* statistics values function should retrieve. This parameter
* can be set to NULL if n is 0. In this case function will retrieve
* all avalible statistics.
diff --git a/lib/librte_hash/rte_cuckoo_hash.c b/lib/librte_hash/rte_cuckoo_hash.c
index 645c0cfab..1b7a0da9f 100644
--- a/lib/librte_hash/rte_cuckoo_hash.c
+++ b/lib/librte_hash/rte_cuckoo_hash.c
@@ -569,7 +569,7 @@ __rte_hash_add_key_with_hash(const struct rte_hash *h, const void *key,
k->pdata = data;
/*
* Return index where key is stored,
- * substracting the first dummy index
+ * subtracting the first dummy index
*/
return prim_bkt->key_idx[i] - 1;
}
@@ -589,7 +589,7 @@ __rte_hash_add_key_with_hash(const struct rte_hash *h, const void *key,
k->pdata = data;
/*
* Return index where key is stored,
- * substracting the first dummy index
+ * subtracting the first dummy index
*/
return sec_bkt->key_idx[i] - 1;
}
@@ -730,7 +730,7 @@ __rte_hash_lookup_with_hash(const struct rte_hash *h, const void *key,
*data = k->pdata;
/*
* Return index where key is stored,
- * substracting the first dummy index
+ * subtracting the first dummy index
*/
return bkt->key_idx[i] - 1;
}
@@ -753,7 +753,7 @@ __rte_hash_lookup_with_hash(const struct rte_hash *h, const void *key,
*data = k->pdata;
/*
* Return index where key is stored,
- * substracting the first dummy index
+ * subtracting the first dummy index
*/
return bkt->key_idx[i] - 1;
}
@@ -847,7 +847,7 @@ __rte_hash_del_key_with_hash(const struct rte_hash *h, const void *key,
/*
* Return index where key is stored,
- * substracting the first dummy index
+ * subtracting the first dummy index
*/
ret = bkt->key_idx[i] - 1;
bkt->key_idx[i] = EMPTY_SLOT;
@@ -872,7 +872,7 @@ __rte_hash_del_key_with_hash(const struct rte_hash *h, const void *key,
/*
* Return index where key is stored,
- * substracting the first dummy index
+ * subtracting the first dummy index
*/
ret = bkt->key_idx[i] - 1;
bkt->key_idx[i] = EMPTY_SLOT;
diff --git a/lib/librte_ip_frag/rte_ip_frag.h b/lib/librte_ip_frag/rte_ip_frag.h
index 6708906d3..4794587ef 100644
--- a/lib/librte_ip_frag/rte_ip_frag.h
+++ b/lib/librte_ip_frag/rte_ip_frag.h
@@ -233,7 +233,7 @@ rte_ipv6_fragment_packet(struct rte_mbuf *pkt_in,
* Pointer to the IPv6 fragment extension header.
* @return
* Pointer to mbuf for reassembled packet, or NULL if:
- * - an error occured.
+ * - an error occurred.
* - not all fragments of the packet are collected yet.
*/
struct rte_mbuf *rte_ipv6_frag_reassemble_packet(struct rte_ip_frag_tbl *tbl,
@@ -307,7 +307,7 @@ int32_t rte_ipv4_fragment_packet(struct rte_mbuf *pkt_in,
* Pointer to the IPV4 header inside the fragment.
* @return
* Pointer to mbuf for reassebled packet, or NULL if:
- * - an error occured.
+ * - an error occurred.
* - not all fragments of the packet are collected yet.
*/
struct rte_mbuf * rte_ipv4_frag_reassemble_packet(struct rte_ip_frag_tbl *tbl,
diff --git a/lib/librte_ip_frag/rte_ipv4_reassembly.c b/lib/librte_ip_frag/rte_ipv4_reassembly.c
index e084ca59a..b13308966 100644
--- a/lib/librte_ip_frag/rte_ipv4_reassembly.c
+++ b/lib/librte_ip_frag/rte_ipv4_reassembly.c
@@ -118,7 +118,7 @@ ipv4_frag_reassemble(struct ip_frag_pkt *fp)
* Pointer to the IPV4 header inside the fragment.
* @return
* Pointer to mbuf for reassebled packet, or NULL if:
- * - an error occured.
+ * - an error occurred.
* - not all fragments of the packet are collected yet.
*/
struct rte_mbuf *
diff --git a/lib/librte_ip_frag/rte_ipv6_reassembly.c b/lib/librte_ip_frag/rte_ipv6_reassembly.c
index 21a5ef5d3..dde58cb78 100644
--- a/lib/librte_ip_frag/rte_ipv6_reassembly.c
+++ b/lib/librte_ip_frag/rte_ipv6_reassembly.c
@@ -155,7 +155,7 @@ ipv6_frag_reassemble(struct ip_frag_pkt *fp)
* Pointer to the IPV6 fragment extension header.
* @return
* Pointer to mbuf for reassembled packet, or NULL if:
- * - an error occured.
+ * - an error occurred.
* - not all fragments of the packet are collected yet.
*/
#define MORE_FRAGS(x) (((x) & 0x100) >> 8)
diff --git a/lib/librte_kni/rte_kni.c b/lib/librte_kni/rte_kni.c
index c3f9208c1..40288a179 100644
--- a/lib/librte_kni/rte_kni.c
+++ b/lib/librte_kni/rte_kni.c
@@ -119,7 +119,7 @@ struct rte_kni_memzone_pool {
uint32_t max_ifaces; /**< Max. num of KNI ifaces */
struct rte_kni_memzone_slot *slots; /**< Pool slots */
- rte_spinlock_t mutex; /**< alloc/relase mutex */
+ rte_spinlock_t mutex; /**< alloc/release mutex */
/* Free memzone slots linked-list */
struct rte_kni_memzone_slot *free; /**< First empty slot */
diff --git a/lib/librte_reorder/rte_reorder.h b/lib/librte_reorder/rte_reorder.h
index 737e0554c..4cd8de765 100644
--- a/lib/librte_reorder/rte_reorder.h
+++ b/lib/librte_reorder/rte_reorder.h
@@ -147,7 +147,7 @@ rte_reorder_free(struct rte_reorder_buffer *b);
* -1 on error
* On error case, rte_errno will be set appropriately:
* - ENOSPC - Cannot move existing mbufs from reorder buffer to accommodate
- * ealry mbuf, but it can be accomodated by performing drain and then insert.
+ * ealry mbuf, but it can be accommodated by performing drain and then insert.
* - ERANGE - Too early or late mbuf which is vastly out of range of expected
* window should be ingnored without any handling.
*/
diff --git a/lib/librte_timer/rte_timer.c b/lib/librte_timer/rte_timer.c
index 18782fab0..43e61782d 100644
--- a/lib/librte_timer/rte_timer.c
+++ b/lib/librte_timer/rte_timer.c
@@ -183,7 +183,7 @@ timer_set_running_state(struct rte_timer *tim)
return -1;
/* here, we know that timer is stopped or pending,
- * mark it atomically as beeing configured */
+ * mark it atomically as being configured */
status.state = RTE_TIMER_RUNNING;
status.owner = (int16_t)lcore_id;
success = rte_atomic32_cmpset(&tim->status.u32,
diff --git a/lib/librte_vhost/rte_vhost.h b/lib/librte_vhost/rte_vhost.h
index 605e47cbf..80e911a8d 100644
--- a/lib/librte_vhost/rte_vhost.h
+++ b/lib/librte_vhost/rte_vhost.h
@@ -365,7 +365,7 @@ struct rte_mempool;
/**
* This function adds buffers to the virtio devices RX virtqueue. Buffers can
* be received from the physical port or from another virtual device. A packet
- * count is returned to indicate the number of packets that were succesfully
+ * count is returned to indicate the number of packets that were successfully
* added to the RX queue.
* @param vid
* vhost device ID
diff --git a/lib/librte_vhost/virtio_net.c b/lib/librte_vhost/virtio_net.c
index 48219e050..6c6dde915 100644
--- a/lib/librte_vhost/virtio_net.c
+++ b/lib/librte_vhost/virtio_net.c
@@ -233,7 +233,7 @@ copy_mbuf_to_desc(struct virtio_net *dev, struct vring_desc *descs,
/**
* This function adds buffers to the virtio devices RX virtqueue. Buffers can
* be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that are succesfully
+ * count is returned to indicate the number of packets that are successfully
* added to the RX queue. This function works when the mbuf is scattered, but
* it doesn't support the mergeable feature.
*/
diff --git a/mk/arch/i686/rte.vars.mk b/mk/arch/i686/rte.vars.mk
index 6a25312cc..ec7b7a6bb 100644
--- a/mk/arch/i686/rte.vars.mk
+++ b/mk/arch/i686/rte.vars.mk
@@ -32,15 +32,15 @@
#
# arch:
#
-# - define ARCH variable (overriden by cmdline or by previous
+# - define ARCH variable (overridden by cmdline or by previous
# optional define in machine .mk)
-# - define CROSS variable (overriden by cmdline or previous define
+# - define CROSS variable (overridden by cmdline or previous define
# in machine .mk)
-# - define CPU_CFLAGS variable (overriden by cmdline or previous
+# - define CPU_CFLAGS variable (overridden by cmdline or previous
# define in machine .mk)
-# - define CPU_LDFLAGS variable (overriden by cmdline or previous
+# - define CPU_LDFLAGS variable (overridden by cmdline or previous
# define in machine .mk)
-# - define CPU_ASFLAGS variable (overriden by cmdline or previous
+# - define CPU_ASFLAGS variable (overridden by cmdline or previous
# define in machine .mk)
# - may override any previously defined variable
#
diff --git a/mk/arch/x86_64/rte.vars.mk b/mk/arch/x86_64/rte.vars.mk
index 83723c8e0..617fa655b 100644
--- a/mk/arch/x86_64/rte.vars.mk
+++ b/mk/arch/x86_64/rte.vars.mk
@@ -32,15 +32,15 @@
#
# arch:
#
-# - define ARCH variable (overriden by cmdline or by previous
+# - define ARCH variable (overridden by cmdline or by previous
# optional define in machine .mk)
-# - define CROSS variable (overriden by cmdline or previous define
+# - define CROSS variable (overridden by cmdline or previous define
# in machine .mk)
-# - define CPU_CFLAGS variable (overriden by cmdline or previous
+# - define CPU_CFLAGS variable (overridden by cmdline or previous
# define in machine .mk)
-# - define CPU_LDFLAGS variable (overriden by cmdline or previous
+# - define CPU_LDFLAGS variable (overridden by cmdline or previous
# define in machine .mk)
-# - define CPU_ASFLAGS variable (overriden by cmdline or previous
+# - define CPU_ASFLAGS variable (overridden by cmdline or previous
# define in machine .mk)
# - may override any previously defined variable
#
diff --git a/mk/exec-env/bsdapp/rte.vars.mk b/mk/exec-env/bsdapp/rte.vars.mk
index 47a673e7d..ebae68ccc 100644
--- a/mk/exec-env/bsdapp/rte.vars.mk
+++ b/mk/exec-env/bsdapp/rte.vars.mk
@@ -32,9 +32,9 @@
#
# exec-env:
#
-# - define EXECENV_CFLAGS variable (overriden by cmdline)
-# - define EXECENV_LDFLAGS variable (overriden by cmdline)
-# - define EXECENV_ASFLAGS variable (overriden by cmdline)
+# - define EXECENV_CFLAGS variable (overridden by cmdline)
+# - define EXECENV_LDFLAGS variable (overridden by cmdline)
+# - define EXECENV_ASFLAGS variable (overridden by cmdline)
# - may override any previously defined variable
#
# examples for RTE_EXEC_ENV: linuxapp, bsdapp
diff --git a/mk/exec-env/linuxapp/rte.vars.mk b/mk/exec-env/linuxapp/rte.vars.mk
index a8a1ee4cb..9a7169996 100644
--- a/mk/exec-env/linuxapp/rte.vars.mk
+++ b/mk/exec-env/linuxapp/rte.vars.mk
@@ -32,9 +32,9 @@
#
# exec-env:
#
-# - define EXECENV_CFLAGS variable (overriden by cmdline)
-# - define EXECENV_LDFLAGS variable (overriden by cmdline)
-# - define EXECENV_ASFLAGS variable (overriden by cmdline)
+# - define EXECENV_CFLAGS variable (overridden by cmdline)
+# - define EXECENV_LDFLAGS variable (overridden by cmdline)
+# - define EXECENV_ASFLAGS variable (overridden by cmdline)
# - may override any previously defined variable
#
# examples for RTE_EXEC_ENV: linuxapp, bsdapp
diff --git a/mk/machine/atm/rte.vars.mk b/mk/machine/atm/rte.vars.mk
index d6fbba0f9..cfed1108b 100644
--- a/mk/machine/atm/rte.vars.mk
+++ b/mk/machine/atm/rte.vars.mk
@@ -32,16 +32,16 @@
#
# machine:
#
-# - can define ARCH variable (overriden by cmdline value)
-# - can define CROSS variable (overriden by cmdline value)
-# - define MACHINE_CFLAGS variable (overriden by cmdline value)
-# - define MACHINE_LDFLAGS variable (overriden by cmdline value)
-# - define MACHINE_ASFLAGS variable (overriden by cmdline value)
-# - can define CPU_CFLAGS variable (overriden by cmdline value) that
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_LDFLAGS variable (overriden by cmdline value) that
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_ASFLAGS variable (overriden by cmdline value) that
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
# - may override any previously defined variable
#
diff --git a/mk/machine/default/rte.vars.mk b/mk/machine/default/rte.vars.mk
index 53c6af6e4..a6fb84244 100644
--- a/mk/machine/default/rte.vars.mk
+++ b/mk/machine/default/rte.vars.mk
@@ -32,16 +32,16 @@
#
# machine:
#
-# - can define ARCH variable (overriden by cmdline value)
-# - can define CROSS variable (overriden by cmdline value)
-# - define MACHINE_CFLAGS variable (overriden by cmdline value)
-# - define MACHINE_LDFLAGS variable (overriden by cmdline value)
-# - define MACHINE_ASFLAGS variable (overriden by cmdline value)
-# - can define CPU_CFLAGS variable (overriden by cmdline value) that
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_LDFLAGS variable (overriden by cmdline value) that
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_ASFLAGS variable (overriden by cmdline value) that
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
# - may override any previously defined variable
#
diff --git a/mk/machine/hsw/rte.vars.mk b/mk/machine/hsw/rte.vars.mk
index eedc5d026..66a562e75 100644
--- a/mk/machine/hsw/rte.vars.mk
+++ b/mk/machine/hsw/rte.vars.mk
@@ -32,16 +32,16 @@
#
# machine:
#
-# - can define ARCH variable (overriden by cmdline value)
-# - can define CROSS variable (overriden by cmdline value)
-# - define MACHINE_CFLAGS variable (overriden by cmdline value)
-# - define MACHINE_LDFLAGS variable (overriden by cmdline value)
-# - define MACHINE_ASFLAGS variable (overriden by cmdline value)
-# - can define CPU_CFLAGS variable (overriden by cmdline value) that
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_LDFLAGS variable (overriden by cmdline value) that
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_ASFLAGS variable (overriden by cmdline value) that
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
# - may override any previously defined variable
#
diff --git a/mk/machine/ivb/rte.vars.mk b/mk/machine/ivb/rte.vars.mk
index 932241afa..768a25d23 100644
--- a/mk/machine/ivb/rte.vars.mk
+++ b/mk/machine/ivb/rte.vars.mk
@@ -32,16 +32,16 @@
#
# machine:
#
-# - can define ARCH variable (overriden by cmdline value)
-# - can define CROSS variable (overriden by cmdline value)
-# - define MACHINE_CFLAGS variable (overriden by cmdline value)
-# - define MACHINE_LDFLAGS variable (overriden by cmdline value)
-# - define MACHINE_ASFLAGS variable (overriden by cmdline value)
-# - can define CPU_CFLAGS variable (overriden by cmdline value) that
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_LDFLAGS variable (overriden by cmdline value) that
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_ASFLAGS variable (overriden by cmdline value) that
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
# - may override any previously defined variable
#
diff --git a/mk/machine/native/rte.vars.mk b/mk/machine/native/rte.vars.mk
index 6ce0c723b..7f55b54a8 100644
--- a/mk/machine/native/rte.vars.mk
+++ b/mk/machine/native/rte.vars.mk
@@ -32,16 +32,16 @@
#
# machine:
#
-# - can define ARCH variable (overriden by cmdline value)
-# - can define CROSS variable (overriden by cmdline value)
-# - define MACHINE_CFLAGS variable (overriden by cmdline value)
-# - define MACHINE_LDFLAGS variable (overriden by cmdline value)
-# - define MACHINE_ASFLAGS variable (overriden by cmdline value)
-# - can define CPU_CFLAGS variable (overriden by cmdline value) that
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_LDFLAGS variable (overriden by cmdline value) that
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_ASFLAGS variable (overriden by cmdline value) that
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
# - may override any previously defined variable
#
diff --git a/mk/machine/nhm/rte.vars.mk b/mk/machine/nhm/rte.vars.mk
index 9566efd7c..8921c328f 100644
--- a/mk/machine/nhm/rte.vars.mk
+++ b/mk/machine/nhm/rte.vars.mk
@@ -32,16 +32,16 @@
#
# machine:
#
-# - can define ARCH variable (overriden by cmdline value)
-# - can define CROSS variable (overriden by cmdline value)
-# - define MACHINE_CFLAGS variable (overriden by cmdline value)
-# - define MACHINE_LDFLAGS variable (overriden by cmdline value)
-# - define MACHINE_ASFLAGS variable (overriden by cmdline value)
-# - can define CPU_CFLAGS variable (overriden by cmdline value) that
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_LDFLAGS variable (overriden by cmdline value) that
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_ASFLAGS variable (overriden by cmdline value) that
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
# - may override any previously defined variable
#
diff --git a/mk/machine/snb/rte.vars.mk b/mk/machine/snb/rte.vars.mk
index a9c1b7caf..0709f3d28 100644
--- a/mk/machine/snb/rte.vars.mk
+++ b/mk/machine/snb/rte.vars.mk
@@ -32,16 +32,16 @@
#
# machine:
#
-# - can define ARCH variable (overriden by cmdline value)
-# - can define CROSS variable (overriden by cmdline value)
-# - define MACHINE_CFLAGS variable (overriden by cmdline value)
-# - define MACHINE_LDFLAGS variable (overriden by cmdline value)
-# - define MACHINE_ASFLAGS variable (overriden by cmdline value)
-# - can define CPU_CFLAGS variable (overriden by cmdline value) that
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_LDFLAGS variable (overriden by cmdline value) that
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_ASFLAGS variable (overriden by cmdline value) that
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
# - may override any previously defined variable
#
diff --git a/mk/machine/wsm/rte.vars.mk b/mk/machine/wsm/rte.vars.mk
index c8a266cab..3a2fa2b06 100644
--- a/mk/machine/wsm/rte.vars.mk
+++ b/mk/machine/wsm/rte.vars.mk
@@ -32,16 +32,16 @@
#
# machine:
#
-# - can define ARCH variable (overriden by cmdline value)
-# - can define CROSS variable (overriden by cmdline value)
-# - define MACHINE_CFLAGS variable (overriden by cmdline value)
-# - define MACHINE_LDFLAGS variable (overriden by cmdline value)
-# - define MACHINE_ASFLAGS variable (overriden by cmdline value)
-# - can define CPU_CFLAGS variable (overriden by cmdline value) that
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_LDFLAGS variable (overriden by cmdline value) that
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_ASFLAGS variable (overriden by cmdline value) that
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
# - may override any previously defined variable
#
diff --git a/mk/rte.vars.mk b/mk/rte.vars.mk
index 418e49a2e..b51006b81 100644
--- a/mk/rte.vars.mk
+++ b/mk/rte.vars.mk
@@ -96,7 +96,7 @@ ifeq ($(RTE_TOOLCHAIN),)
$(error RTE_TOOLCHAIN is not defined)
endif
-# can be overriden by make command line or exported environment variable
+# can be overridden by make command line or exported environment variable
RTE_KERNELDIR ?= /lib/modules/$(shell uname -r)/build
export RTE_TARGET
diff --git a/mk/target/generic/rte.vars.mk b/mk/target/generic/rte.vars.mk
index 5d22a6a67..84649b9b1 100644
--- a/mk/target/generic/rte.vars.mk
+++ b/mk/target/generic/rte.vars.mk
@@ -38,16 +38,16 @@
#
# machine:
#
-# - can define ARCH variable (overriden by cmdline value)
-# - can define CROSS variable (overriden by cmdline value)
-# - define MACHINE_CFLAGS variable (overriden by cmdline value)
-# - define MACHINE_LDFLAGS variable (overriden by cmdline value)
-# - define MACHINE_ASFLAGS variable (overriden by cmdline value)
-# - can define CPU_CFLAGS variable (overriden by cmdline value) that
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_LDFLAGS variable (overriden by cmdline value) that
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
-# - can define CPU_ASFLAGS variable (overriden by cmdline value) that
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
# overrides the one defined in arch.
#
ifneq ($(wildcard $(RTE_SDK)/mk/machine/$(RTE_MACHINE)/rte.vars.mk),)
@@ -59,15 +59,15 @@ endif
#
# arch:
#
-# - define ARCH variable (overriden by cmdline or by previous
+# - define ARCH variable (overridden by cmdline or by previous
# optional define in machine .mk)
-# - define CROSS variable (overriden by cmdline or previous define
+# - define CROSS variable (overridden by cmdline or previous define
# in machine .mk)
-# - define CPU_CFLAGS variable (overriden by cmdline or previous
+# - define CPU_CFLAGS variable (overridden by cmdline or previous
# define in machine .mk)
-# - define CPU_LDFLAGS variable (overriden by cmdline or previous
+# - define CPU_LDFLAGS variable (overridden by cmdline or previous
# define in machine .mk)
-# - define CPU_ASFLAGS variable (overriden by cmdline or previous
+# - define CPU_ASFLAGS variable (overridden by cmdline or previous
# define in machine .mk)
# - may override any previously defined variable
#
@@ -77,9 +77,9 @@ include $(RTE_SDK)/mk/arch/$(RTE_ARCH)/rte.vars.mk
# toolchain:
#
# - define CC, LD, AR, AS, ...
-# - define TOOLCHAIN_CFLAGS variable (overriden by cmdline value)
-# - define TOOLCHAIN_LDFLAGS variable (overriden by cmdline value)
-# - define TOOLCHAIN_ASFLAGS variable (overriden by cmdline value)
+# - define TOOLCHAIN_CFLAGS variable (overridden by cmdline value)
+# - define TOOLCHAIN_LDFLAGS variable (overridden by cmdline value)
+# - define TOOLCHAIN_ASFLAGS variable (overridden by cmdline value)
# - may override any previously defined variable
#
include $(RTE_SDK)/mk/toolchain/$(RTE_TOOLCHAIN)/rte.vars.mk
@@ -87,9 +87,9 @@ include $(RTE_SDK)/mk/toolchain/$(RTE_TOOLCHAIN)/rte.vars.mk
#
# exec-env:
#
-# - define EXECENV_CFLAGS variable (overriden by cmdline)
-# - define EXECENV_LDFLAGS variable (overriden by cmdline)
-# - define EXECENV_ASFLAGS variable (overriden by cmdline)
+# - define EXECENV_CFLAGS variable (overridden by cmdline)
+# - define EXECENV_LDFLAGS variable (overridden by cmdline)
+# - define EXECENV_ASFLAGS variable (overridden by cmdline)
# - may override any previously defined variable
#
include $(RTE_SDK)/mk/exec-env/$(RTE_EXEC_ENV)/rte.vars.mk
diff --git a/mk/toolchain/clang/rte.vars.mk b/mk/toolchain/clang/rte.vars.mk
index af34c10aa..dde922d22 100644
--- a/mk/toolchain/clang/rte.vars.mk
+++ b/mk/toolchain/clang/rte.vars.mk
@@ -32,10 +32,10 @@
#
# toolchain:
#
-# - define CC, LD, AR, AS, ... (overriden by cmdline value)
-# - define TOOLCHAIN_CFLAGS variable (overriden by cmdline value)
-# - define TOOLCHAIN_LDFLAGS variable (overriden by cmdline value)
-# - define TOOLCHAIN_ASFLAGS variable (overriden by cmdline value)
+# - define CC, LD, AR, AS, ... (overridden by cmdline value)
+# - define TOOLCHAIN_CFLAGS variable (overridden by cmdline value)
+# - define TOOLCHAIN_LDFLAGS variable (overridden by cmdline value)
+# - define TOOLCHAIN_ASFLAGS variable (overridden by cmdline value)
#
CC = $(CROSS)clang
diff --git a/mk/toolchain/gcc/rte.vars.mk b/mk/toolchain/gcc/rte.vars.mk
index 3834e00cf..3b907e201 100644
--- a/mk/toolchain/gcc/rte.vars.mk
+++ b/mk/toolchain/gcc/rte.vars.mk
@@ -32,10 +32,10 @@
#
# toolchain:
#
-# - define CC, LD, AR, AS, ... (overriden by cmdline value)
-# - define TOOLCHAIN_CFLAGS variable (overriden by cmdline value)
-# - define TOOLCHAIN_LDFLAGS variable (overriden by cmdline value)
-# - define TOOLCHAIN_ASFLAGS variable (overriden by cmdline value)
+# - define CC, LD, AR, AS, ... (overridden by cmdline value)
+# - define TOOLCHAIN_CFLAGS variable (overridden by cmdline value)
+# - define TOOLCHAIN_LDFLAGS variable (overridden by cmdline value)
+# - define TOOLCHAIN_ASFLAGS variable (overridden by cmdline value)
#
CC = $(CROSS)gcc
diff --git a/mk/toolchain/icc/rte.vars.mk b/mk/toolchain/icc/rte.vars.mk
index dd3364519..33a8ba79e 100644
--- a/mk/toolchain/icc/rte.vars.mk
+++ b/mk/toolchain/icc/rte.vars.mk
@@ -32,10 +32,10 @@
#
# toolchain:
#
-# - define CC, LD, AR, AS, ... (overriden by cmdline value)
-# - define TOOLCHAIN_CFLAGS variable (overriden by cmdline value)
-# - define TOOLCHAIN_LDFLAGS variable (overriden by cmdline value)
-# - define TOOLCHAIN_ASFLAGS variable (overriden by cmdline value)
+# - define CC, LD, AR, AS, ... (overridden by cmdline value)
+# - define TOOLCHAIN_CFLAGS variable (overridden by cmdline value)
+# - define TOOLCHAIN_LDFLAGS variable (overridden by cmdline value)
+# - define TOOLCHAIN_ASFLAGS variable (overridden by cmdline value)
#
# Warning: we do not use CROSS environment variable as icc is mainly a
diff --git a/test/test/test_cmdline_cirbuf.c b/test/test/test_cmdline_cirbuf.c
index 87f83cc6d..2c321457d 100644
--- a/test/test/test_cmdline_cirbuf.c
+++ b/test/test/test_cmdline_cirbuf.c
@@ -45,7 +45,7 @@
#define CIRBUF_STR_HEAD " HEAD"
#define CIRBUF_STR_TAIL "TAIL"
-/* miscelaneous tests - they make bullseye happy */
+/* miscellaneous tests - they make bullseye happy */
static int
test_cirbuf_string_misc(void)
{
diff --git a/test/test/test_distributor.c b/test/test/test_distributor.c
index 890a8526b..9fae688b8 100644
--- a/test/test/test_distributor.c
+++ b/test/test/test_distributor.c
@@ -112,7 +112,7 @@ handle_work(void *arg)
/* do basic sanity testing of the distributor. This test tests the following:
* - send 32 packets through distributor with the same tag and ensure they
* all go to the one worker
- * - send 32 packets throught the distributor with two different tags and
+ * - send 32 packets through the distributor with two different tags and
* verify that they go equally to two different workers.
* - send 32 packets with different tags through the distributors and
* just verify we get all packets back.
diff --git a/test/test/test_eal_flags.c b/test/test/test_eal_flags.c
index 91b40664b..4afb36432 100644
--- a/test/test/test_eal_flags.c
+++ b/test/test/test_eal_flags.c
@@ -824,7 +824,7 @@ test_dom0_misc_flags(void)
/* check that some general flags don't prevent things from working.
* All cases, apart from the first, app should run.
- * No futher testing of output done.
+ * No further testing of output done.
*/
/* sanity check - failure with invalid option */
const char *argv0[] = {prgname, prefix, mp_flag, "-c", "1", "--invalid-opt"};
@@ -932,7 +932,7 @@ test_misc_flags(void)
/* check that some general flags don't prevent things from working.
* All cases, apart from the first, app should run.
- * No futher testing of output done.
+ * No further testing of output done.
*/
/* sanity check - failure with invalid option */
const char *argv0[] = {prgname, prefix, mp_flag, "-c", "1", "--invalid-opt"};
diff --git a/test/test/test_func_reentrancy.c b/test/test/test_func_reentrancy.c
index baa01ffc2..95440dd10 100644
--- a/test/test/test_func_reentrancy.c
+++ b/test/test/test_func_reentrancy.c
@@ -138,7 +138,7 @@ ring_create_lookup(__attribute__((unused)) void *arg)
return -1;
}
- /* verify all ring created sucessful */
+ /* verify all ring created successful */
for (i = 0; i < MAX_ITER_TIMES; i++) {
snprintf(ring_name, sizeof(ring_name), "fr_test_%d_%d", lcore_self, i);
if (rte_ring_lookup(ring_name) == NULL)
@@ -192,7 +192,7 @@ mempool_create_lookup(__attribute__((unused)) void *arg)
return -1;
}
- /* verify all ring created sucessful */
+ /* verify all ring created successful */
for (i = 0; i < MAX_ITER_TIMES; i++) {
snprintf(mempool_name, sizeof(mempool_name), "fr_test_%d_%d", lcore_self, i);
if (rte_mempool_lookup(mempool_name) == NULL)
diff --git a/test/test/test_hash.c b/test/test/test_hash.c
index 2c87efe69..2fafc44b0 100644
--- a/test/test/test_hash.c
+++ b/test/test/test_hash.c
@@ -1030,7 +1030,7 @@ static int test_hash_creation_with_bad_parameters(void)
handle = rte_hash_create(NULL);
if (handle != NULL) {
rte_hash_free(handle);
- printf("Impossible creating hash sucessfully without any parameter\n");
+ printf("Impossible creating hash successfully without any parameter\n");
return -1;
}
@@ -1040,7 +1040,7 @@ static int test_hash_creation_with_bad_parameters(void)
handle = rte_hash_create(¶ms);
if (handle != NULL) {
rte_hash_free(handle);
- printf("Impossible creating hash sucessfully with entries in parameter exceeded\n");
+ printf("Impossible creating hash successfully with entries in parameter exceeded\n");
return -1;
}
@@ -1050,7 +1050,7 @@ static int test_hash_creation_with_bad_parameters(void)
handle = rte_hash_create(¶ms);
if (handle != NULL) {
rte_hash_free(handle);
- printf("Impossible creating hash sucessfully if entries less than bucket_entries in parameter\n");
+ printf("Impossible creating hash successfully if entries less than bucket_entries in parameter\n");
return -1;
}
@@ -1060,7 +1060,7 @@ static int test_hash_creation_with_bad_parameters(void)
handle = rte_hash_create(¶ms);
if (handle != NULL) {
rte_hash_free(handle);
- printf("Impossible creating hash sucessfully if key_len in parameter is zero\n");
+ printf("Impossible creating hash successfully if key_len in parameter is zero\n");
return -1;
}
@@ -1070,7 +1070,7 @@ static int test_hash_creation_with_bad_parameters(void)
handle = rte_hash_create(¶ms);
if (handle != NULL) {
rte_hash_free(handle);
- printf("Impossible creating hash sucessfully with invalid socket\n");
+ printf("Impossible creating hash successfully with invalid socket\n");
return -1;
}
diff --git a/test/test/test_interrupts.c b/test/test/test_interrupts.c
index e0229e5ee..e0cd8a82f 100644
--- a/test/test/test_interrupts.c
+++ b/test/test/test_interrupts.c
@@ -409,7 +409,7 @@ test_interrupt(void)
printf("Check unknown valid interrupt full path\n");
if (test_interrupt_full_path_check(TEST_INTERRUPT_HANDLE_VALID) < 0) {
- printf("failure occured during checking unknown valid "
+ printf("failure occurred during checking unknown valid "
"interrupt full path\n");
goto out;
}
@@ -417,7 +417,7 @@ test_interrupt(void)
printf("Check valid UIO interrupt full path\n");
if (test_interrupt_full_path_check(TEST_INTERRUPT_HANDLE_VALID_UIO)
< 0) {
- printf("failure occured during checking valid UIO interrupt "
+ printf("failure occurred during checking valid UIO interrupt "
"full path\n");
goto out;
}
@@ -425,7 +425,7 @@ test_interrupt(void)
printf("Check valid alarm interrupt full path\n");
if (test_interrupt_full_path_check(TEST_INTERRUPT_HANDLE_VALID_ALARM)
< 0) {
- printf("failure occured during checking valid alarm "
+ printf("failure occurred during checking valid alarm "
"interrupt full path\n");
goto out;
}
diff --git a/test/test/test_link_bonding.c b/test/test/test_link_bonding.c
index 52d2d052f..57830391a 100644
--- a/test/test/test_link_bonding.c
+++ b/test/test/test_link_bonding.c
@@ -1375,7 +1375,7 @@ test_roundrobin_tx_burst(void)
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_ROUND_ROBIN, 0, 2, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
burst_size = 20 * test_params->bonded_slave_count;
@@ -1464,7 +1464,7 @@ test_roundrobin_tx_burst_slave_tx_fail(void)
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_ROUND_ROBIN, 0,
TEST_RR_SLAVE_TX_FAIL_SLAVE_COUNT, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Generate test bursts of packets to transmit */
TEST_ASSERT_EQUAL(generate_test_burst(pkt_burst,
@@ -2951,7 +2951,7 @@ test_balance_tx_burst_slave_tx_fail(void)
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0,
TEST_BAL_SLAVE_TX_FAIL_SLAVE_COUNT, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER2),
@@ -3082,7 +3082,7 @@ test_balance_rx_burst(void)
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0, 3, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Generate test bursts of packets to transmit */
for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
@@ -3161,7 +3161,7 @@ test_balance_verify_promiscuous_enable_disable(void)
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0, 4, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
rte_eth_promiscuous_enable(test_params->bonded_port_id);
@@ -3204,7 +3204,7 @@ test_balance_verify_mac_assignment(void)
/* Initialize bonded device with 2 slaves in active backup mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0, 2, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Verify that bonded MACs is that of first slave and that the other slave
* MAC hasn't been changed */
@@ -3321,7 +3321,7 @@ test_balance_verify_slave_link_status_change_behaviour(void)
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BALANCE, 0, TEST_BALANCE_LINK_STATUS_SLAVE_COUNT, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER2),
@@ -3476,7 +3476,7 @@ test_broadcast_tx_burst(void)
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, 2, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
initialize_eth_header(test_params->pkt_eth_hdr,
(struct ether_addr *)src_mac, (struct ether_addr *)dst_mac_0,
@@ -3557,7 +3557,7 @@ test_broadcast_tx_burst_slave_tx_fail(void)
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0,
TEST_BCAST_SLAVE_TX_FAIL_SLAVE_COUNT, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Generate test bursts for transmission */
TEST_ASSERT_EQUAL(generate_test_burst(pkts_burst,
@@ -3675,7 +3675,7 @@ test_broadcast_rx_burst(void)
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, 3, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Generate test bursts of packets to transmit */
for (i = 0; i < BROADCAST_RX_BURST_NUM_OF_SLAVES; i++) {
@@ -3754,7 +3754,7 @@ test_broadcast_verify_promiscuous_enable_disable(void)
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, 4, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
rte_eth_promiscuous_enable(test_params->bonded_port_id);
@@ -3800,7 +3800,7 @@ test_broadcast_verify_mac_assignment(void)
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, 4, 1),
- "Failed to intialise bonded device");
+ "Failed to initialise bonded device");
/* Verify that all MACs are the same as first slave added to bonded
* device */
@@ -3890,7 +3890,7 @@ test_broadcast_verify_slave_link_status_change_behaviour(void)
/* Initialize bonded device with 4 slaves in round robin mode */
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
BONDING_MODE_BROADCAST, 0, BROADCAST_LINK_STATUS_NUM_OF_SLAVES,
- 1), "Failed to intialise bonded device");
+ 1), "Failed to initialise bonded device");
/* Verify Current Slaves Count /Active Slave Count is */
slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id, slaves,
@@ -4372,7 +4372,7 @@ test_tlb_verify_mac_assignment(void)
/* Set explicit MAC address */
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
test_params->bonded_port_id, (struct ether_addr *)bonded_mac),
- "failed to set MAC addres");
+ "failed to set MAC address");
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
diff --git a/test/test/test_link_bonding_mode4.c b/test/test/test_link_bonding_mode4.c
index 106ec624f..c6745e891 100644
--- a/test/test/test_link_bonding_mode4.c
+++ b/test/test/test_link_bonding_mode4.c
@@ -821,7 +821,7 @@ test_mode4_rx(void)
TEST_ASSERT(cnt[0] == expected_pkts_cnt / 2 &&
cnt[1] == expected_pkts_cnt / 2,
"Expected %u packets with the same MAC and %u with different but "
- "got %u with the same and %u with diffrent MAC",
+ "got %u with the same and %u with different MAC",
expected_pkts_cnt / 2, expected_pkts_cnt / 2, cnt[1], cnt[0]);
} else if (retval > 0)
free_pkts(pkts, retval);
@@ -925,7 +925,7 @@ test_mode4_rx(void)
break;
}
- TEST_ASSERT(j < 5, "Failed to agregate slave after link up");
+ TEST_ASSERT(j < 5, "Failed to aggregate slave after link up");
}
remove_slaves_and_stop_bonded_device();
@@ -1263,7 +1263,7 @@ test_mode4_expired(void)
retval = bond_handshake_reply(slave);
TEST_ASSERT(retval >= 0, "Handshake failed");
- /* Remove replay for slave that supose to be expired. */
+ /* Remove replay for slave that suppose to be expired. */
if (slave == exp_slave) {
while (rte_ring_count(slave->rx_queue) > 0) {
void *pkt = NULL;
diff --git a/test/test/test_malloc.c b/test/test/test_malloc.c
index 0673d85b7..fcd8b8639 100644
--- a/test/test/test_malloc.c
+++ b/test/test/test_malloc.c
@@ -738,7 +738,7 @@ test_malloc_bad_params(void)
return -1;
}
-/* Check if memory is avilable on a specific socket */
+/* Check if memory is available on a specific socket */
static int
is_mem_on_socket(int32_t socket)
{
diff --git a/test/test/test_mbuf.c b/test/test/test_mbuf.c
index d3ea812e5..758402d6b 100644
--- a/test/test/test_mbuf.c
+++ b/test/test/test_mbuf.c
@@ -674,7 +674,7 @@ test_pktmbuf_free_segment(void)
/*
* Stress test for rte_mbuf atomic refcnt.
* Implies that RTE_MBUF_REFCNT_ATOMIC is defined.
- * For more efficency, recomended to run with RTE_LIBRTE_MBUF_DEBUG defined.
+ * For more efficiency, recommended to run with RTE_LIBRTE_MBUF_DEBUG defined.
*/
#ifdef RTE_MBUF_REFCNT_ATOMIC
diff --git a/test/test/test_spinlock.c b/test/test/test_spinlock.c
index 2d94eecc2..b86cd887c 100644
--- a/test/test/test_spinlock.c
+++ b/test/test/test_spinlock.c
@@ -202,7 +202,7 @@ test_spinlock_perf(void)
/*
* Use rte_spinlock_trylock() to trylock a spinlock object,
- * If it could not lock the object sucessfully, it would
+ * If it could not lock the object successfully, it would
* return immediately and the variable of "count" would be
* increased by one per times. the value of "count" could be
* checked as the result later.
--
2.13.0
More information about the dev
mailing list