[dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter

Xing, Beilei beilei.xing at intel.com
Mon Jun 17 07:27:18 CEST 2019



> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Qiming Yang
> Sent: Wednesday, June 12, 2019 3:50 PM
> To: dev at dpdk.org
> Cc: Zhao1, Wei <wei.zhao1 at intel.com>
> Subject: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
> 
> From: wei zhao <wei.zhao1 at intel.com>
> 
> The patch enables the backend of rte_flow. It transfers rte_flow_xxx to
> device specific data structure and configures packet process engine's binary
> classifier
> (switch) properly.
> 
> Signed-off-by: Wei Zhao <wei.zhao1 at intel.com>
> ---
>  drivers/net/ice/Makefile            |   1 +
>  drivers/net/ice/ice_ethdev.h        |   6 +
>  drivers/net/ice/ice_switch_filter.c | 502
> ++++++++++++++++++++++++++++++++++++
>  drivers/net/ice/ice_switch_filter.h |  28 ++
>  drivers/net/ice/meson.build         |   3 +-
>  5 files changed, 539 insertions(+), 1 deletion(-)  create mode 100644
> drivers/net/ice/ice_switch_filter.c
>  create mode 100644 drivers/net/ice/ice_switch_filter.h
> 
> diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile index
> 0e5c55e..b10d826 100644
> --- a/drivers/net/ice/Makefile
> +++ b/drivers/net/ice/Makefile
> @@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
>  SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c  endif
> 
> +SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
>  ifeq ($(findstring
> RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
>  	CC_AVX2_SUPPORT=1
>  else
> diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h index
> 1385afa..67a358a 100644
> --- a/drivers/net/ice/ice_ethdev.h
> +++ b/drivers/net/ice/ice_ethdev.h
> @@ -234,6 +234,12 @@ struct ice_vsi {
>  	bool offset_loaded;
>  };
> 
> +/* Struct to store flow created. */
> +struct rte_flow {
> +	TAILQ_ENTRY(rte_flow) node;
> +void *rule;
> +};
> +
>  struct ice_pf {
>  	struct ice_adapter *adapter; /* The adapter this PF associate to */
>  	struct ice_vsi *main_vsi; /* pointer to main VSI structure */ diff --git
> a/drivers/net/ice/ice_switch_filter.c b/drivers/net/ice/ice_switch_filter.c
> new file mode 100644
> index 0000000..e679675
> --- /dev/null
> +++ b/drivers/net/ice/ice_switch_filter.c
> @@ -0,0 +1,502 @@
> +#include <sys/queue.h>
> +#include <stdio.h>
> +#include <errno.h>
> +#include <stdint.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <stdarg.h>
> +
> +#include <rte_debug.h>
> +#include <rte_ether.h>
> +#include <rte_ethdev_driver.h>
> +#include <rte_log.h>
> +#include <rte_malloc.h>
> +#include <rte_eth_ctrl.h>
> +#include <rte_tailq.h>
> +#include <rte_flow_driver.h>
> +
> +#include "ice_logs.h"
> +#include "base/ice_type.h"
> +#include "ice_switch_filter.h"
> +
> +static int
> +ice_parse_switch_filter(
> +			const struct rte_flow_item pattern[],
> +			const struct rte_flow_action actions[],
> +			struct rte_flow_error *error,
> +			struct ice_adv_rule_info *rule_info,
> +			struct ice_adv_lkup_elem **lkup_list,
> +			uint16_t *lkups_num)
> +{
> +	const struct rte_flow_item *item = pattern;
> +	enum rte_flow_item_type item_type;
> +	const struct rte_flow_item_eth *eth_spec, *eth_mask;
> +	const struct rte_flow_item_ipv4 *ipv4_spec, *ipv4_mask;
> +	const struct rte_flow_item_ipv6 *ipv6_spec, *ipv6_mask;
> +	const struct rte_flow_item_tcp *tcp_spec, *tcp_mask;
> +	const struct rte_flow_item_udp *udp_spec, *udp_mask;
> +	const struct rte_flow_item_sctp *sctp_spec, *sctp_mask;
> +	const struct rte_flow_item_nvgre  *nvgre_spec, *nvgre_mask;
> +	const struct rte_flow_item_vxlan  *vxlan_spec, *vxlan_mask;
> +	struct ice_adv_lkup_elem *list;
> +	uint16_t i, j, t = 0;
> +	uint16_t item_num = 0;
> +	enum ice_sw_tunnel_type tun_type = ICE_NON_TUN;
> +
> +	for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> +		if (item->type == RTE_FLOW_ITEM_TYPE_ETH ||
> +			item->type == RTE_FLOW_ITEM_TYPE_IPV4 ||
> +			item->type == RTE_FLOW_ITEM_TYPE_IPV6 ||
> +			item->type == RTE_FLOW_ITEM_TYPE_UDP ||
> +			item->type == RTE_FLOW_ITEM_TYPE_TCP ||
> +			item->type == RTE_FLOW_ITEM_TYPE_SCTP ||
> +			item->type == RTE_FLOW_ITEM_TYPE_VXLAN ||
> +			item->type == RTE_FLOW_ITEM_TYPE_NVGRE)
> +			item_num++;
> +	}

I think the pattern is verified in generic flow framework, so how about  removing the condition here?

...

> +
> +/* By now ice switch filter action code implement only
> +* supports QUEUE or DROP.
> +*/
> +static int
> +ice_parse_switch_action(struct ice_pf *pf,
> +				 const struct rte_flow_action *actions,
> +				 struct rte_flow_error *error,
> +				 struct ice_adv_rule_info *rule_info) {
> +	struct ice_hw *hw = ICE_PF_TO_HW(pf);
> +	struct ice_vsi *vsi = pf->main_vsi;
> +	const struct rte_flow_action *act;
> +	const struct rte_flow_action_queue *act_q;
> +	uint16_t base_queue, index = 0;
> +	uint32_t reg;
> +
> +	/* Check if the first non-void action is QUEUE or DROP. */
> +	NEXT_ITEM_OF_ACTION(act, actions, index);
> +	if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE &&
> +	    act->type != RTE_FLOW_ACTION_TYPE_DROP) {
> +		rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> +				   act, "Not supported action.");
> +		return -rte_errno;
> +	}
> +	reg = ICE_READ_REG(hw, PFLAN_RX_QALLOC);
> +	if (reg & PFLAN_RX_QALLOC_VALID_M) {
> +		base_queue = reg & PFLAN_RX_QALLOC_FIRSTQ_M;
> +	} else {
> +		rte_flow_error_set(error, EINVAL,
> +			RTE_FLOW_ERROR_TYPE_ACTION,
> +			act, "Invalid queue register");
> +		return -rte_errno;
> +	}
> +	if (act->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> +		act_q = act->conf;
> +		rule_info->sw_act.fltr_act = ICE_FWD_TO_Q;
> +		rule_info->sw_act.fwd_id.q_id = base_queue + act_q->index;
> +		if (act_q->index >= pf->dev_data->nb_rx_queues) {
> +			rte_flow_error_set(error, EINVAL,
> +				RTE_FLOW_ERROR_TYPE_ACTION,
> +				act, "Invalid queue ID for"
> +				" switch filter.");
> +			return -rte_errno;
> +		}
> +	} else {
> +		rule_info->sw_act.fltr_act = ICE_DROP_PACKET;
> +	}
> +
> +	rule_info->sw_act.vsi_handle = vsi->idx;
> +	rule_info->rx = 1;
> +	rule_info->sw_act.src = vsi->idx;
> +
> +	/* Check if the next non-void item is END */
> +	index++;
> +	NEXT_ITEM_OF_ACTION(act, actions, index);
> +	if (act->type != RTE_FLOW_ACTION_TYPE_END) {
> +		rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> +				   act, "Not supported action.");
> +		return -rte_errno;
> +	}
> +
> +	return 0;
> +}


How about use supported array to replace NEXT_ITEM_OF_ACTION? Just like pattern.


> +
> +static int
> +ice_switch_rule_set(struct ice_pf *pf,
> +			struct ice_adv_lkup_elem *list,
> +			uint16_t lkups_cnt,
> +			struct ice_adv_rule_info *rule_info,
> +			struct rte_flow *flow)
> +{
> +	struct ice_hw *hw = ICE_PF_TO_HW(pf);
> +	int ret;
> +	struct ice_rule_query_data rule_added = {0};
> +	struct ice_rule_query_data *filter_ptr;
> +
> +	if (lkups_cnt > ICE_MAX_CHAIN_WORDS) {
> +		PMD_DRV_LOG(ERR, "item number too large for rule");
> +		return -ENOTSUP;
> +	}
> +	if (!list) {
> +		PMD_DRV_LOG(ERR, "lookup list should not be NULL");
> +		return -ENOTSUP;
> +	}
> +
> +	ret = ice_add_adv_rule(hw, list, lkups_cnt, rule_info, &rule_added);
> +
> +	if (!ret) {
> +		filter_ptr = rte_zmalloc("ice_switch_filter",
> +			sizeof(struct ice_rule_query_data), 0);
> +		if (!filter_ptr) {
> +			PMD_DRV_LOG(ERR, "failed to allocate memory");
> +			return -EINVAL;
> +		}
> +		flow->rule = filter_ptr;
> +		rte_memcpy(filter_ptr,
> +			&rule_added,
> +			sizeof(struct ice_rule_query_data));
> +	}
> +
> +	return ret;
> +}
> +
> +int
> +ice_create_switch_filter(struct ice_pf *pf,
> +			const struct rte_flow_item pattern[],
> +			const struct rte_flow_action actions[],
> +			struct rte_flow *flow,
> +			struct rte_flow_error *error)
> +{
> +	int ret = 0;
> +	struct ice_adv_rule_info rule_info = {0};
> +	struct ice_adv_lkup_elem *list = NULL;
> +	uint16_t lkups_num = 0;
> +
> +	ret = ice_parse_switch_filter(pattern, actions, error,
> +			&rule_info, &list, &lkups_num);
> +	if (ret)
> +		goto out;
> +
> +	ret = ice_parse_switch_action(pf, actions, error, &rule_info);
> +	if (ret)
> +		goto out;
> +
> +	ret = ice_switch_rule_set(pf, list, lkups_num, &rule_info, flow);
> +	if (ret)
> +		goto out;
> +
> +	rte_free(list);

Why allocate list is not in the function?

> +	return 0;
> +
> +out:
> +	rte_free(list);
> +
> +	return -rte_errno;
> +}
> +
> +int
> +ice_destroy_switch_filter(struct ice_pf *pf,
> +			struct rte_flow *flow)
> +{
> +	struct ice_hw *hw = ICE_PF_TO_HW(pf);
> +	int ret;
> +	struct ice_rule_query_data *filter_ptr;
> +	struct ice_rule_query_data rule_added;
> +
> +	filter_ptr = (struct ice_rule_query_data *)
> +			flow->rule;
> +	rte_memcpy(&rule_added, filter_ptr,
> +		sizeof(struct ice_rule_query_data));
> +
> +	if (!filter_ptr) {
> +		PMD_DRV_LOG(ERR, "no such flow"
> +			    " create by switch filter");
> +		return -EINVAL;
> +	}

How about add struct rte_flow_error *error as the parameter, and use rte_flow_error_set here?

> +
> +	ret = ice_rem_adv_rule_by_id(hw, &rule_added);
> +
> +	rte_free(filter_ptr);
> +
> +	return ret;
> +}
> +
> +void
> +ice_free_switch_filter_rule(void *rule) {
> +	struct ice_rule_query_data *filter_ptr;
> +
> +	filter_ptr = (struct ice_rule_query_data *)rule;
> +
> +	rte_free(filter_ptr);
> +}
> diff --git a/drivers/net/ice/ice_switch_filter.h
> b/drivers/net/ice/ice_switch_filter.h
> new file mode 100644
> index 0000000..957d0d1
> --- /dev/null
> +++ b/drivers/net/ice/ice_switch_filter.h
> @@ -0,0 +1,28 @@
> +#ifndef _ICE_SWITCH_FILTER_H_
> +#define _ICE_SWITCH_FILTER_H_
> +
> +#include "base/ice_switch.h"
> +#include "base/ice_type.h"
> +#include "ice_ethdev.h"
> +
> +#define NEXT_ITEM_OF_ACTION(act, actions, index)                        \
> +	do {                                                            \
> +		act = actions + index;                                  \
> +		while (act->type == RTE_FLOW_ACTION_TYPE_VOID) {        \
> +			index++;                                        \
> +			act = actions + index;                          \
> +		}                                                       \
> +	} while (0)
> +
> +int
> +ice_create_switch_filter(struct ice_pf *pf,
> +			const struct rte_flow_item pattern[],
> +			const struct rte_flow_action actions[],
> +			struct rte_flow *flow,
> +			struct rte_flow_error *error);
> +int
> +ice_destroy_switch_filter(struct ice_pf *pf,
> +			struct rte_flow *flow);
> +void
> +ice_free_switch_filter_rule(void *rule); #endif /*
> +_ICE_SWITCH_FILTER_H_ */
> diff --git a/drivers/net/ice/meson.build b/drivers/net/ice/meson.build index
> 2bec688..8697676 100644
> --- a/drivers/net/ice/meson.build
> +++ b/drivers/net/ice/meson.build
> @@ -6,7 +6,8 @@ objs = [base_objs]
> 
>  sources = files(
>  	'ice_ethdev.c',
> -	'ice_rxtx.c'
> +	'ice_rxtx.c',
> +	'ice_switch_filter.c'
>  	)
> 
>  deps += ['hash']
> --
> 2.9.5



More information about the dev mailing list