[dpdk-dev] [PATCH v5 3/3] app/testpmd: use API to set max LRO packet size
Ananyev, Konstantin
konstantin.ananyev at intel.com
Mon Nov 11 00:11:25 CET 2019
>
> This patch implements use of the API for LRO aggregated packet
> max size.
> It adds command-line and runtime commands to configure this value,
> and adds option to show the supported value.
> Documentation is updated accordingly.
>
> Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> Acked-by: Bernard Iremonger <bernard.iremonger at intel.com>
> Acked-by: Matan Azrad <matan at mellanox.com>
> ---
> app/test-pmd/cmdline.c | 76 +++++++++++++++++++++++++++++
> app/test-pmd/config.c | 2 +
> app/test-pmd/parameters.c | 7 +++
> app/test-pmd/testpmd.c | 1 +
> doc/guides/testpmd_app_ug/run_app.rst | 5 ++
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 ++++
> 6 files changed, 100 insertions(+)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index 78c6899..2206a70 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -777,6 +777,9 @@ static void cmd_help_long_parsed(void *parsed_result,
> "port config all max-pkt-len (value)\n"
> " Set the max packet length.\n\n"
>
> + "port config all max-lro-pkt-size (value)\n"
> + " Set the max LRO aggregated packet size.\n\n"
> +
> "port config all drop-en (on|off)\n"
> " Enable or disable packet drop on all RX queues of all ports when no "
> "receive buffers available.\n\n"
> @@ -2040,6 +2043,78 @@ struct cmd_config_max_pkt_len_result {
> },
> };
>
> +/* *** config max LRO aggregated packet size *** */
> +struct cmd_config_max_lro_pkt_size_result {
> + cmdline_fixed_string_t port;
> + cmdline_fixed_string_t keyword;
> + cmdline_fixed_string_t all;
> + cmdline_fixed_string_t name;
> + uint32_t value;
> +};
> +
> +static void
> +cmd_config_max_lro_pkt_size_parsed(void *parsed_result,
> + __attribute__((unused)) struct cmdline *cl,
> + __attribute__((unused)) void *data)
> +{
> + struct cmd_config_max_lro_pkt_size_result *res = parsed_result;
> + portid_t pid;
> +
> + if (!all_ports_stopped()) {
> + printf("Please stop all ports first\n");
> + return;
> + }
> +
> + RTE_ETH_FOREACH_DEV(pid) {
> + struct rte_port *port = &ports[pid];
> +
> + if (!strcmp(res->name, "max-lro-pkt-size")) {
> + if (res->value ==
> + port->dev_conf.rxmode.max_lro_pkt_size)
> + return;
> +
> + port->dev_conf.rxmode.max_lro_pkt_size = res->value;
> + } else {
> + printf("Unknown parameter\n");
> + return;
> + }
> + }
> +
> + init_port_config();
> +
> + cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1);
> +}
> +
> +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_port =
> + TOKEN_STRING_INITIALIZER(struct cmd_config_max_lro_pkt_size_result,
> + port, "port");
> +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_keyword =
> + TOKEN_STRING_INITIALIZER(struct cmd_config_max_lro_pkt_size_result,
> + keyword, "config");
> +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_all =
> + TOKEN_STRING_INITIALIZER(struct cmd_config_max_lro_pkt_size_result,
> + all, "all");
> +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_name =
> + TOKEN_STRING_INITIALIZER(struct cmd_config_max_lro_pkt_size_result,
> + name, "max-lro-pkt-size");
> +cmdline_parse_token_num_t cmd_config_max_lro_pkt_size_value =
> + TOKEN_NUM_INITIALIZER(struct cmd_config_max_lro_pkt_size_result,
> + value, UINT32);
> +
> +cmdline_parse_inst_t cmd_config_max_lro_pkt_size = {
> + .f = cmd_config_max_lro_pkt_size_parsed,
> + .data = NULL,
> + .help_str = "port config all max-lro-pkt-size <value>",
> + .tokens = {
> + (void *)&cmd_config_max_lro_pkt_size_port,
> + (void *)&cmd_config_max_lro_pkt_size_keyword,
> + (void *)&cmd_config_max_lro_pkt_size_all,
> + (void *)&cmd_config_max_lro_pkt_size_name,
> + (void *)&cmd_config_max_lro_pkt_size_value,
> + NULL,
> + },
> +};
> +
> /* *** configure port MTU *** */
> struct cmd_config_mtu_result {
> cmdline_fixed_string_t port;
> @@ -19124,6 +19199,7 @@ struct cmd_show_rx_tx_desc_status_result {
> (cmdline_parse_inst_t *)&cmd_config_rx_tx,
> (cmdline_parse_inst_t *)&cmd_config_mtu,
> (cmdline_parse_inst_t *)&cmd_config_max_pkt_len,
> + (cmdline_parse_inst_t *)&cmd_config_max_lro_pkt_size,
> (cmdline_parse_inst_t *)&cmd_config_rx_mode_flag,
> (cmdline_parse_inst_t *)&cmd_config_rss,
> (cmdline_parse_inst_t *)&cmd_config_rxtx_ring_size,
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index b603974..e1e5cf7 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -616,6 +616,8 @@ static int bus_match_all(const struct rte_bus *bus, const void *data)
> printf("Minimum size of RX buffer: %u\n", dev_info.min_rx_bufsize);
> printf("Maximum configurable length of RX packet: %u\n",
> dev_info.max_rx_pktlen);
> + printf("Maximum configurable size of LRO aggregated packet: %u\n",
> + dev_info.max_lro_pkt_size);
> if (dev_info.max_vfs)
> printf("Maximum number of VFs: %u\n", dev_info.max_vfs);
> if (dev_info.max_vmdq_pools)
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> index 9ea87c1..eda395b 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -107,6 +107,8 @@
> printf(" --total-num-mbufs=N: set the number of mbufs to be allocated "
> "in mbuf pools.\n");
> printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
> + printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
> + "size to N bytes.\n");
> #ifdef RTE_LIBRTE_CMDLINE
> printf(" --eth-peers-configfile=name: config file with ethernet addresses "
> "of peer ports.\n");
> @@ -592,6 +594,7 @@
> { "mbuf-size", 1, 0, 0 },
> { "total-num-mbufs", 1, 0, 0 },
> { "max-pkt-len", 1, 0, 0 },
> + { "max-lro-pkt-size", 1, 0, 0 },
> { "pkt-filter-mode", 1, 0, 0 },
> { "pkt-filter-report-hash", 1, 0, 0 },
> { "pkt-filter-size", 1, 0, 0 },
> @@ -888,6 +891,10 @@
> "Invalid max-pkt-len=%d - should be > %d\n",
> n, RTE_ETHER_MIN_LEN);
> }
> + if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-size")) {
> + n = atoi(optarg);
> + rx_mode.max_lro_pkt_size = (uint32_t) n;
> + }
> if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
> if (!strcmp(optarg, "signature"))
> fdir_conf.mode =
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index 5ba9741..3fe694f 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -419,6 +419,7 @@ struct fwd_engine * fwd_engines[] = {
> struct rte_eth_rxmode rx_mode = {
> .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
> /**< Default maximum frame length. */
> + .max_lro_pkt_size = RTE_ETHER_MAX_LEN,
That looks like a change in current testpmd behavior, correct?
If so, is there real need for that?
Can't we have either some value for max_lro_pktlen, that would
indicate PMD to use the default value it prefers?
Or probably better to let have a separate function to set max lro size.
Then by default PMD will always use its preferred value,
and when needed user can change it via special function call.
> };
>
> struct rte_eth_txmode tx_mode = {
> diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
> index 00e0c2a..721f740 100644
> --- a/doc/guides/testpmd_app_ug/run_app.rst
> +++ b/doc/guides/testpmd_app_ug/run_app.rst
> @@ -112,6 +112,11 @@ The command line options are:
>
> Set the maximum packet size to N bytes, where N >= 64. The default value is 1518.
>
> +* ``--max-lro-pkt-size=N``
> +
> + Set the maximum LRO aggregated packet size to N bytes, where N >= 64.
> + The default value is 1518.
> +
> * ``--eth-peers-configfile=name``
>
> Use a configuration file containing the Ethernet addresses of the peer ports.
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 9a5e5cb..9cfc82a 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -2147,6 +2147,15 @@ Set the maximum packet length::
>
> This is equivalent to the ``--max-pkt-len`` command-line option.
>
> +port config - max-lro-pkt-size
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Set the maximum LRO aggregated packet size::
> +
> + testpmd> port config all max-lro-pkt-size (value)
> +
> +This is equivalent to the ``--max-lro-pkt-size`` command-line option.
> +
> port config - Drop Packets
> ~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> --
> 1.8.3.1
More information about the dev
mailing list