[dpdk-dev] [PATCH v5 3/3] app/testpmd: use API to set max LRO packet size

Dekel Peled dekelp at mellanox.com
Mon Nov 11 08:40:41 CET 2019


Thanks, PSB.

> -----Original Message-----
> From: Ananyev, Konstantin <konstantin.ananyev at intel.com>
> Sent: Monday, November 11, 2019 1:11 AM
> To: Dekel Peled <dekelp at mellanox.com>; Mcnamara, John
> <john.mcnamara at intel.com>; Kovacevic, Marko
> <marko.kovacevic at intel.com>; nhorman at tuxdriver.com;
> ajit.khaparde at broadcom.com; somnath.kotur at broadcom.com; Burakov,
> Anatoly <anatoly.burakov at intel.com>; xuanziyang2 at huawei.com;
> cloud.wangxiaoyun at huawei.com; zhouguoyang at huawei.com; Lu, Wenzhuo
> <wenzhuo.lu at intel.com>; Matan Azrad <matan at mellanox.com>; Shahaf
> Shuler <shahafs at mellanox.com>; Slava Ovsiienko
> <viacheslavo at mellanox.com>; rmody at marvell.com;
> shshaikh at marvell.com; maxime.coquelin at redhat.com; Bie, Tiwei
> <tiwei.bie at intel.com>; Wang, Zhihong <zhihong.wang at intel.com>;
> yongwang at vmware.com; Thomas Monjalon <thomas at monjalon.net>; Yigit,
> Ferruh <ferruh.yigit at intel.com>; arybchenko at solarflare.com; Wu, Jingjing
> <jingjing.wu at intel.com>; Iremonger, Bernard
> <bernard.iremonger at intel.com>
> Cc: dev at dpdk.org
> Subject: RE: [PATCH v5 3/3] app/testpmd: use API to set max LRO packet size
> 
> 
> >
> > This patch implements use of the API for LRO aggregated packet max
> > size.
> > It adds command-line and runtime commands to configure this value, and
> > adds option to show the supported value.
> > Documentation is updated accordingly.
> >
> > Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> > Acked-by: Bernard Iremonger <bernard.iremonger at intel.com>
> > Acked-by: Matan Azrad <matan at mellanox.com>
> > ---
> >  app/test-pmd/cmdline.c                      | 76
> +++++++++++++++++++++++++++++
> >  app/test-pmd/config.c                       |  2 +
> >  app/test-pmd/parameters.c                   |  7 +++
> >  app/test-pmd/testpmd.c                      |  1 +
> >  doc/guides/testpmd_app_ug/run_app.rst       |  5 ++
> >  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  9 ++++
> >  6 files changed, 100 insertions(+)
> >
> > diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> > 78c6899..2206a70 100644
> > --- a/app/test-pmd/cmdline.c
> > +++ b/app/test-pmd/cmdline.c
> > @@ -777,6 +777,9 @@ static void cmd_help_long_parsed(void
> *parsed_result,
> >  			"port config all max-pkt-len (value)\n"
> >  			"    Set the max packet length.\n\n"
> >
> > +			"port config all max-lro-pkt-size (value)\n"
> > +			"    Set the max LRO aggregated packet size.\n\n"
> > +
> >  			"port config all drop-en (on|off)\n"
> >  			"    Enable or disable packet drop on all RX queues of
> all ports when no "
> >  			"receive buffers available.\n\n"
> > @@ -2040,6 +2043,78 @@ struct cmd_config_max_pkt_len_result {
> >  	},
> >  };
> >
> > +/* *** config max LRO aggregated packet size *** */ struct
> > +cmd_config_max_lro_pkt_size_result {
> > +	cmdline_fixed_string_t port;
> > +	cmdline_fixed_string_t keyword;
> > +	cmdline_fixed_string_t all;
> > +	cmdline_fixed_string_t name;
> > +	uint32_t value;
> > +};
> > +
> > +static void
> > +cmd_config_max_lro_pkt_size_parsed(void *parsed_result,
> > +				__attribute__((unused)) struct cmdline *cl,
> > +				__attribute__((unused)) void *data) {
> > +	struct cmd_config_max_lro_pkt_size_result *res = parsed_result;
> > +	portid_t pid;
> > +
> > +	if (!all_ports_stopped()) {
> > +		printf("Please stop all ports first\n");
> > +		return;
> > +	}
> > +
> > +	RTE_ETH_FOREACH_DEV(pid) {
> > +		struct rte_port *port = &ports[pid];
> > +
> > +		if (!strcmp(res->name, "max-lro-pkt-size")) {
> > +			if (res->value ==
> > +					port-
> >dev_conf.rxmode.max_lro_pkt_size)
> > +				return;
> > +
> > +			port->dev_conf.rxmode.max_lro_pkt_size = res-
> >value;
> > +		} else {
> > +			printf("Unknown parameter\n");
> > +			return;
> > +		}
> > +	}
> > +
> > +	init_port_config();
> > +
> > +	cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1); }
> > +
> > +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_port =
> > +	TOKEN_STRING_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> > +				 port, "port");
> > +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_keyword
> =
> > +	TOKEN_STRING_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> > +				 keyword, "config");
> > +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_all =
> > +	TOKEN_STRING_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> > +				 all, "all");
> > +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_name =
> > +	TOKEN_STRING_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> > +				 name, "max-lro-pkt-size");
> > +cmdline_parse_token_num_t cmd_config_max_lro_pkt_size_value =
> > +	TOKEN_NUM_INITIALIZER(struct
> cmd_config_max_lro_pkt_size_result,
> > +			      value, UINT32);
> > +
> > +cmdline_parse_inst_t cmd_config_max_lro_pkt_size = {
> > +	.f = cmd_config_max_lro_pkt_size_parsed,
> > +	.data = NULL,
> > +	.help_str = "port config all max-lro-pkt-size <value>",
> > +	.tokens = {
> > +		(void *)&cmd_config_max_lro_pkt_size_port,
> > +		(void *)&cmd_config_max_lro_pkt_size_keyword,
> > +		(void *)&cmd_config_max_lro_pkt_size_all,
> > +		(void *)&cmd_config_max_lro_pkt_size_name,
> > +		(void *)&cmd_config_max_lro_pkt_size_value,
> > +		NULL,
> > +	},
> > +};
> > +
> >  /* *** configure port MTU *** */
> >  struct cmd_config_mtu_result {
> >  	cmdline_fixed_string_t port;
> > @@ -19124,6 +19199,7 @@ struct cmd_show_rx_tx_desc_status_result {
> >  	(cmdline_parse_inst_t *)&cmd_config_rx_tx,
> >  	(cmdline_parse_inst_t *)&cmd_config_mtu,
> >  	(cmdline_parse_inst_t *)&cmd_config_max_pkt_len,
> > +	(cmdline_parse_inst_t *)&cmd_config_max_lro_pkt_size,
> >  	(cmdline_parse_inst_t *)&cmd_config_rx_mode_flag,
> >  	(cmdline_parse_inst_t *)&cmd_config_rss,
> >  	(cmdline_parse_inst_t *)&cmd_config_rxtx_ring_size, diff --git
> > a/app/test-pmd/config.c b/app/test-pmd/config.c index b603974..e1e5cf7
> > 100644
> > --- a/app/test-pmd/config.c
> > +++ b/app/test-pmd/config.c
> > @@ -616,6 +616,8 @@ static int bus_match_all(const struct rte_bus *bus,
> const void *data)
> >  	printf("Minimum size of RX buffer: %u\n",
> dev_info.min_rx_bufsize);
> >  	printf("Maximum configurable length of RX packet: %u\n",
> >  		dev_info.max_rx_pktlen);
> > +	printf("Maximum configurable size of LRO aggregated packet: %u\n",
> > +		dev_info.max_lro_pkt_size);
> >  	if (dev_info.max_vfs)
> >  		printf("Maximum number of VFs: %u\n", dev_info.max_vfs);
> >  	if (dev_info.max_vmdq_pools)
> > diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> > index 9ea87c1..eda395b 100644
> > --- a/app/test-pmd/parameters.c
> > +++ b/app/test-pmd/parameters.c
> > @@ -107,6 +107,8 @@
> >  	printf("  --total-num-mbufs=N: set the number of mbufs to be
> allocated "
> >  	       "in mbuf pools.\n");
> >  	printf("  --max-pkt-len=N: set the maximum size of packet to N
> > bytes.\n");
> > +	printf("  --max-lro-pkt-size=N: set the maximum LRO aggregated
> packet "
> > +	       "size to N bytes.\n");
> >  #ifdef RTE_LIBRTE_CMDLINE
> >  	printf("  --eth-peers-configfile=name: config file with ethernet
> addresses "
> >  	       "of peer ports.\n");
> > @@ -592,6 +594,7 @@
> >  		{ "mbuf-size",			1, 0, 0 },
> >  		{ "total-num-mbufs",		1, 0, 0 },
> >  		{ "max-pkt-len",		1, 0, 0 },
> > +		{ "max-lro-pkt-size",		1, 0, 0 },
> >  		{ "pkt-filter-mode",            1, 0, 0 },
> >  		{ "pkt-filter-report-hash",     1, 0, 0 },
> >  		{ "pkt-filter-size",            1, 0, 0 },
> > @@ -888,6 +891,10 @@
> >  						 "Invalid max-pkt-len=%d -
> should be > %d\n",
> >  						 n, RTE_ETHER_MIN_LEN);
> >  			}
> > +			if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-
> size")) {
> > +				n = atoi(optarg);
> > +				rx_mode.max_lro_pkt_size = (uint32_t) n;
> > +			}
> >  			if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode"))
> {
> >  				if (!strcmp(optarg, "signature"))
> >  					fdir_conf.mode =
> > diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> > 5ba9741..3fe694f 100644
> > --- a/app/test-pmd/testpmd.c
> > +++ b/app/test-pmd/testpmd.c
> > @@ -419,6 +419,7 @@ struct fwd_engine * fwd_engines[] = {  struct
> > rte_eth_rxmode rx_mode = {
> >  	.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
> >  		/**< Default maximum frame length. */
> > +	.max_lro_pkt_size = RTE_ETHER_MAX_LEN,
> 
> That looks like a change in current testpmd behavior, correct?
> If so, is there real need for that?
> Can't we have either some value for max_lro_pktlen, that would indicate
> PMD to use the default value it prefers?
> Or probably better to let have a separate function to set max lro size.
> Then by default PMD will always use its preferred value, and when needed
> user can change it via special function call.
> 

This is to keep consistent with max_rx_pkt_len use.

> >  };
> >
> >  struct rte_eth_txmode tx_mode = {
> > diff --git a/doc/guides/testpmd_app_ug/run_app.rst
> > b/doc/guides/testpmd_app_ug/run_app.rst
> > index 00e0c2a..721f740 100644
> > --- a/doc/guides/testpmd_app_ug/run_app.rst
> > +++ b/doc/guides/testpmd_app_ug/run_app.rst
> > @@ -112,6 +112,11 @@ The command line options are:
> >
> >      Set the maximum packet size to N bytes, where N >= 64. The default
> value is 1518.
> >
> > +*   ``--max-lro-pkt-size=N``
> > +
> > +    Set the maximum LRO aggregated packet size to N bytes, where N >=
> 64.
> > +    The default value is 1518.
> > +
> >  *   ``--eth-peers-configfile=name``
> >
> >      Use a configuration file containing the Ethernet addresses of the peer
> ports.
> > diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > index 9a5e5cb..9cfc82a 100644
> > --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > @@ -2147,6 +2147,15 @@ Set the maximum packet length::
> >
> >  This is equivalent to the ``--max-pkt-len`` command-line option.
> >
> > +port config - max-lro-pkt-size
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > +
> > +Set the maximum LRO aggregated packet size::
> > +
> > +   testpmd> port config all max-lro-pkt-size (value)
> > +
> > +This is equivalent to the ``--max-lro-pkt-size`` command-line option.
> > +
> >  port config - Drop Packets
> >  ~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > --
> > 1.8.3.1



More information about the dev mailing list