[dpdk-dev] Duplicating traffic with RTE Flow
Jan Viktorin
viktorin at cesnet.cz
Mon Mar 1 15:43:26 CET 2021
On Mon, 1 Mar 2021 14:34:07 +0000
Slava Ovsiienko <viacheslavo at nvidia.com> wrote:
> Hi, Jan
>
> To use port action (I see it is in your sample action list) the flow should be applied to the FDB domain,
> ie "transfer" attribute should be specified:
>
> flow validate 0 ingress transfer...
As you can see (however, it's a bit messy in the response below, in
[1], it is better), I tried both. First without transfer and second
with. The first gives hint "action is valid in transfer mode only" but
the second try with transfer gives "Operation not supported".
Jan
[1] http://mails.dpdk.org/archives/dev/2021-March/200475.html
>
> With best regards, Slava
>
> > -----Original Message-----
> > From: Jan Viktorin <viktorin at cesnet.cz>
> > Sent: Monday, March 1, 2021 14:21
> > To: Asaf Penso <asafp at nvidia.com>
> > Cc: dev at dpdk.org; Ori Kam <orika at nvidia.com>; Jiawei(Jonny) Wang
> > <jiaweiw at nvidia.com>; Slava Ovsiienko <viacheslavo at nvidia.com>
> > Subject: Re: [dpdk-dev] Duplicating traffic with RTE Flow
> >
> > Hello Asaf,
> >
> > it is a while we were in touch regarding this topic. Finally, I am again trying to
> > get work this feature. I've seen that sampling is already upstreamed which is
> > great. However, I am not very successful with that. There is nearly no
> > documentation, just [1], I found no examples, just commit logs...
> >
> > I tried:
> >
> > > set sample_actions 0 port_id id 1 / end > flow validate 0 ingress pattern
> > end actions sample ratio 1 index 0 / drop / end
> > port_flow_complain(): Caught PMD error type 1 (cause unspecified): port id
> > action is valid in transfer mode only: Operation not supported > flow validate
> > 0 ingress transfer pattern end actions sample ratio 1 index 0 / drop / end
> > port_flow_complain(): Caught PMD error type 1 (cause unspecified): (no
> > stated reason): Operation not supported
> >
> > Using CentOS 7, DPDK 20.11.0, OFED-5.2-1.0.4.
> > NICs: MT2892 Family [ConnectX-6 Dx] 101d (fw 22.28.1002), MT27800 Family
> > [ConnectX-5] 1017 (fw 16.27.2008).
> >
> > My primary goal is to be able to deliver exactly the same packets both to
> > DPDK and to the Linux kernel. Doing this at RTE Flow level would be great due
> > to performance and transparency.
> >
> > Jan
> >
> > [1] https://doc.dpdk.org/guides/prog_guide/rte_flow.html#action-sample
> >
> > On Fri, 18 Sep 2020 14:23:42 +0000
> > Asaf Penso <asafp at nvidia.com> wrote:
> >
> > > Hello Jan,
> > >
> > > You can have a look in series [1] where we propose to add APIs to
> > DPDK20.11 for both mirroring and sampling for packets, with additional
> > actions of the different traffic.
> > >
> > > [1]
> > > http://patches.dpdk.org/project/dpdk/list/?series=12045
> > >
> > > Regards,
> > > Asaf Penso
> > >
> > > >-----Original Message-----
> > > >From: dev <dev-bounces at dpdk.org> On Behalf Of Jan Viktorin
> > > >Sent: Friday, September 18, 2020 3:56 PM
> > > >To: dev at dpdk.org
> > > >Subject: [dpdk-dev] Duplicating traffic with RTE Flow
> > > >
> > > >Hello all,
> > > >
> > > >we are looking for a way to duplicate ingress traffic in hardware.
> > > >
> > > >There is an example in [1] suggesting to insert two fate actions into
> > > >the RTE Flow actions array like:
> > > >
> > > > flow create 0 ingress pattern end \
> > > > actions queue index 0 / void / queue index 1 / end
> > > >
> > > >But our experience is that PMDs reject two fate actions (tried with
> > > >mlx5). Another similar approach would be to deliver every single
> > > >packet into two virtual
> > > >functions:
> > > >
> > > > flow create 0 ingress pattern end \
> > > > actions vf index 0 / vf index 1 / end
> > > >
> > > >Third possibility was to use passthru:
> > > >
> > > > flow create 0 ingress pattern end \
> > > > actions passthru / vf index 0 / end flow create 0 ingress
> > > > pattern end \
> > > > actions vf index 1 / end
> > > >
> > > >Again, tried on mlx5 and it does not support the passthru.
> > > >
> > > >Last idea was to use isolate with passthru (to deliver both to DPDK
> > > >application and to the kernel) but again there was no support on mlx5 for
> > passthru...
> > > >
> > > > flow isolate 0 true
> > > > flow create 0 ingress pattern end actions passthru / rss end / end
> > > >
> > > >Is there any other possibility or PMD+NIC that is known to solve such
> > issue?
> > > >
> > > >Thanks
> > > >Jan Viktorin
> > > >
> > > >[1]
> > > >https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdoc
> > > >.dpdk
> > > >.org%2Fguides%2Fprog_guide%2Frte_flow.html%23table-rte-flow-redirect-
> > > >queue-5-
> > >
> > >3&data=02%7C01%7Casafp%40nvidia.com%7C1a46005bec5245e729e70
> > 8d
> > >
> > >85bd24caf%7C43083d15727340c1b7db39efd9ccc17a%7C0%7C0%7C63736030
> > 60
> > >
> > >73519816&sdata=EOF%2Fz62crvBZK8rwzwKIWxj5cVlfPVnU3FLmcL9X2w0
> > %3
> > > >D&reserved=0
>
More information about the dev
mailing list