[dpdk-users] DPDK-19.11 : IPSEC-SECGW tests not successful

[Joshi, Venkatesh]

Hi,

I'm not able to successfully run the IPSEC-SECGW tests with DPDK-19.11. I have followed the guide published at doc.dpdk.org but still not able to get things right.

Please help me figure out what could be wrong.

Here are the setup details:

Network Diagram:
------------------
                                      XL710                             XL 710
               |---------------------|Port 1        IPSEC Tunnel        Port 1|----------------------|
               |    Intel board 1    |<-------------------------------------->|   Intel board 2      |
               |---------------------|                                        |----------------------| 
                 Port 0  ^                                                               ^ Port 0 (XL710)
                 (XL710) |                                                               | 
                         |         |--------------------------------|                    |
                          -------->|7          IXIA                4|<-------------------
                                   |--------------------------------|

* Linux kernel: 4.14
* DPDK version: 19.11
* All ports are 40G ports (XL710 NICs)
* The intel board is: Intel(R) Xeon(R) Gold 5220 CPU
                      - has a single socket, 18 cores, 2 threads per core
* The QAT card: C62x


Issue:
--------
* Traffic is sent from IXIA Port 4 to IXIA port 7:
   - This is IP/UDP traffic of size 1024 bytes
   - The dst mac is set to the MAC of port 0 of the XL710 NIC of Intel board 2
   - The src ip: 40.1.1.10, dst ip: 30.1.1.10
   - No packets are received on IXIA Port 7
   - On further debugging: Packets are not getting forwarded out of the IPSEC tunnel from Intel board 2.

On Intel board 1:
-------------------
XL710 Port 0: b3:00.0 - bound to vfio-pci
XL710 Port 1: b3:00.1 - bound to vfio-pci
QAT VF: 0000:67:01.0 'Device 37c9' drv=vfio-pci

Endpoint 0 config file: attached
Command-line and output file: attached

On Intel board 2:
-------------------
XL710 Port 0: 17:00.0 - bound to vfio-pci
XL710 Port 1: 17:00.1 - bound to vfio-pci
QAT VF: 0000:68:01.0 'Device 37c9' drv=vfio-pci

Endpoint 1 config file: attached
Command-line and output file: attached


DPDK:
-------
- config has the following set:
  CONFIG_RTE_LIBRTE_PMD_QAT=y
  CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y

QAT driver version: qat1.7.l.4.9.0-00008
-------------------------------------------
Makefile has: ICP_SRIOV_AM=1
./configure --enable-icp-sriov=host


Please let me know if any additional information is required.


Regards,
Venkatesh


-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: intel-board1-cmdline-and-output.txt
URL: <http://mails.dpdk.org/archives/users/attachments/20200722/3050bab3/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: intel-board2-cmdline-and-output.txt
URL: <http://mails.dpdk.org/archives/users/attachments/20200722/3050bab3/attachment-0001.txt>