[dpdk-dev] [PATCH] i40e: add VEB switching support for i40e

Zhe Tao zhe.tao at intel.com
Thu Jan 21 07:49:44 CET 2016


VEB switching feature for i40e is used to enable the switching between the
 VSIs connect to the virtual bridge. The old implementation is setting the
 virtual bridge mode as VEPA which is port aggregation. Enable the switching 
 ability by setting the loop back mode for the specific VSIs which connect to PF
 or VFs. 

Signed-off-by: Zhe Tao <zhe.tao at intel.com>
---
 drivers/net/i40e/i40e_ethdev.c | 48 +++++++++++++++++++++++++++++++++++-------
 1 file changed, 40 insertions(+), 8 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index bf6220d..ba2ba9e 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -3822,6 +3822,39 @@ i40e_vsi_get_bw_config(struct i40e_vsi *vsi)
 	return I40E_SUCCESS;
 }
 
+/* i40e_enable_pf_lb
+ * @pf: pointer to the pf structure
+ *
+ * allow loopback on pf
+ */
+static inline void
+i40e_enable_pf_lb(struct i40e_pf *pf)
+{
+	struct i40e_hw *hw = I40E_PF_TO_HW(pf);
+	struct i40e_vsi_context ctxt;
+	int ret;
+
+	memset(&ctxt, 0, sizeof(ctxt));
+	ctxt.seid = pf->main_vsi_seid;
+	ctxt.pf_num = hw->pf_id;
+	ret = i40e_aq_get_vsi_params(hw, &ctxt, NULL);
+	if (ret) {
+		PMD_DRV_LOG(ERR, "cannot get pf vsi config, err %d, aq_err %d",
+			    ret, hw->aq.asq_last_status);
+		return;
+	}
+	ctxt.flags = I40E_AQ_VSI_TYPE_PF;
+	ctxt.info.valid_sections =
+		rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+	ctxt.info.switch_id |=
+		rte_cpu_to_le_16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+
+	ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
+	if (ret)
+		PMD_DRV_LOG(ERR, "update vsi switch failed, aq_err=%d\n",
+			    hw->aq.asq_last_status);
+}
+
 /* Setup a VSI */
 struct i40e_vsi *
 i40e_vsi_setup(struct i40e_pf *pf,
@@ -3857,6 +3890,8 @@ i40e_vsi_setup(struct i40e_pf *pf,
 			PMD_DRV_LOG(ERR, "VEB setup failed");
 			return NULL;
 		}
+		/* set ALLOWLOOPBACk on pf, when veb is created */
+		i40e_enable_pf_lb(pf);
 	}
 
 	vsi = rte_zmalloc("i40e_vsi", sizeof(struct i40e_vsi), 0);
@@ -4029,14 +4064,11 @@ i40e_vsi_setup(struct i40e_pf *pf,
 		ctxt.connection_type = 0x1;
 		ctxt.flags = I40E_AQ_VSI_TYPE_VF;
 
-		/**
-		 * Do not configure switch ID to enable VEB switch by
-		 * I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB. Because in Fortville,
-		 * if the source mac address of packet sent from VF is not
-		 * listed in the VEB's mac table, the VEB will switch the
-		 * packet back to the VF. Need to enable it when HW issue
-		 * is fixed.
-		 */
+		/* Configure switch ID */
+		ctxt.info.valid_sections |=
+			rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+		ctxt.info.switch_id =
+			rte_cpu_to_le_16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
 
 		/* Configure port/vlan */
 		ctxt.info.valid_sections |=
-- 
2.1.4



More information about the dev mailing list