[dpdk-dev] [PATCH v5 7/9] raw/ioat: add configure, start and stop functions

Bruce Richardson bruce.richardson at intel.com
Wed Jul 3 18:44:00 CEST 2019


On Wed, Jul 03, 2019 at 12:21:39PM -0400, Aaron Conole wrote:
> Bruce Richardson <bruce.richardson at intel.com> writes:
> 
> > Allow initializing a driver instance. Include selftest to validate
> > these functions.
> >
> > Signed-off-by: Bruce Richardson <bruce.richardson at intel.com> Acked-by:
> > Anatoly Burakov <anatoly.burakov at intel.com> Tested-by: Harry van Haaren
> > <harry.van.haaren at intel.com> ---
> >
> > V4: Guarantee correct SUCCESS/FAILURE return values from test function
> > Use memzone rather than malloc for ring allocation so we can guarantee
> > contiguous memory.  V3: don't add a new descriptor format struct, reuse
> > from rte_ioat_spec.h V2: test cases placed in self-test routine ---
> > app/test/test_rawdev.c              |  3 +-
> > doc/guides/rawdevs/ioat_rawdev.rst  | 32 +++++++++++
> > drivers/raw/ioat/Makefile           |  1 +
> > drivers/raw/ioat/ioat_rawdev.c      | 82 +++++++++++++++++++++++++++++
> > drivers/raw/ioat/ioat_rawdev_test.c | 41 +++++++++++++++
> > drivers/raw/ioat/meson.build        |  3 +-
> > drivers/raw/ioat/rte_ioat_rawdev.h  |  2 + 7 files changed, 162
> > insertions(+), 2 deletions(-) create mode 100644
> > drivers/raw/ioat/ioat_rawdev_test.c
> >
> > diff --git a/app/test/test_rawdev.c b/app/test/test_rawdev.c index
> > 623117af9..524a9d5f3 100644 --- a/app/test/test_rawdev.c +++
> > b/app/test/test_rawdev.c @@ -36,7 +36,8 @@
> > test_rawdev_selftest_ioat(void) struct rte_rawdev_info info = {
> > .dev_private = NULL }; if (rte_rawdev_info_get(i, &info) == 0 &&
> > strstr(info.driver_name, "ioat") != NULL) -			return
> > TEST_SUCCESS; +			return rte_rawdev_selftest(i) == 0
> > ?  +					TEST_SUCCESS : TEST_FAILED;
> > }
> >  
> >  	printf("No IOAT rawdev found, skipping tests\n"); diff --git
> >  	a/doc/guides/rawdevs/ioat_rawdev.rst
> >  	b/doc/guides/rawdevs/ioat_rawdev.rst index efed9c64c..a0594d2cb
> >  	100644 --- a/doc/guides/rawdevs/ioat_rawdev.rst +++
> >  	b/doc/guides/rawdevs/ioat_rawdev.rst @@ -117,3 +117,35 @@ the
> >  	``dev_private`` field in the ``rte_rawdev_info`` struct should
> >  	either be NULL, or else be set to point to a structure of type
> >  	``rte_ioat_rawdev_config``, in which case the size of the
> >  	configured device input ring will be returned in that structure.  +
> >  	+Device Configuration +~~~~~~~~~~~~~~~~~~~~~ + +Configuring an IOAT
> >  	rawdev device is done using the +``rte_rawdev_configure()`` API,
> >  	which takes the same structure parameters +as the, previously
> >  	referenced, ``rte_rawdev_info_get()`` API. The main +difference is
> >  	that, because the parameter is used as input rather than +output,
> >  	the ``dev_private`` structure element cannot be NULL, and must
> >  	+point to a valid ``rte_ioat_rawdev_config`` structure, containing
> >  	the ring +size to be used by the device. The ring size must be a
> >  	power of two, +between 64 and 4096.  + +The following code shows
> >  	how the device is configured in +``test_ioat_rawdev.c``: + +..
> >  	code-block:: C + +   #define IOAT_TEST_RINGSIZE 512 +        struct
> >  	rte_ioat_rawdev_config p = { .ring_size = -1 }; +        struct
> >  	rte_rawdev_info info = { .dev_private = &p }; + +        /* ... */
> >  	+ +        p.ring_size = IOAT_TEST_RINGSIZE; +        if
> >  	(rte_rawdev_configure(dev_id, &info) != 0) { +
> >  	printf("Error with rte_rawdev_configure()\n"); +
> >  	return -1; +        } + +Once configured, the device can then be
> >  	made ready for use by calling the +``rte_rawdev_start()`` API.
> >  	diff --git a/drivers/raw/ioat/Makefile b/drivers/raw/ioat/Makefile
> >  	index 1e10938f3..b1af9c666 100644 --- a/drivers/raw/ioat/Makefile
> >  	+++ b/drivers/raw/ioat/Makefile @@ -21,6 +21,7 @@ EXPORT_MAP :=
> >  	rte_pmd_ioat_version.map
> >  
> >  # library source files SRCS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) +=
> >  ioat_rawdev.c +SRCS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) +=
> >  ioat_rawdev_test.c
> >  
> >  # export include files SYMLINK-y-include += rte_ioat_rawdev.h diff
> >  --git a/drivers/raw/ioat/ioat_rawdev.c
> >  b/drivers/raw/ioat/ioat_rawdev.c index 2bfe2544d..0c91b3579 100644 ---
> >  a/drivers/raw/ioat/ioat_rawdev.c +++ b/drivers/raw/ioat/ioat_rawdev.c
> >  @@ -34,6 +34,81 @@ static struct rte_pci_driver ioat_pmd_drv; #define
> >  IOAT_PMD_ERR(fmt, args...)    IOAT_PMD_LOG(ERR, fmt, ## args) #define
> >  IOAT_PMD_WARN(fmt, args...)   IOAT_PMD_LOG(WARNING, fmt, ## args)
> >  
> > +#define DESC_SZ sizeof(struct rte_ioat_generic_hw_desc) +#define
> > COMPLETION_SZ sizeof(__m128i) + +static int +ioat_dev_configure(const
> > struct rte_rawdev *dev, rte_rawdev_obj_t config) +{ +	struct
> > rte_ioat_rawdev_config *params = config; +	struct rte_ioat_rawdev
> > *ioat = dev->dev_private; +	char mz_name[RTE_MEMZONE_NAMESIZE]; +
> > unsigned short i; + +	if (dev->started) +		return
> > -EBUSY; + +	if (params == NULL) +		return -EINVAL; + +	if
> > (params->ring_size > 4096 || params->ring_size < 64 || +
> > !rte_is_power_of_2(params->ring_size)) +		return -EINVAL; + +
> > ioat->ring_size = params->ring_size; +	if (ioat->desc_ring !=
> > NULL) { +		rte_memzone_free(ioat->desc_mz); +
> > ioat->desc_ring = NULL; +		ioat->desc_mz = NULL; +	} + +	/*
> > allocate one block of memory for both descriptors +	 * and completion
> > handles.  +	 */ +	snprintf(mz_name, sizeof(mz_name),
> > "rawdev%u_desc_ring", dev->dev_id); +	ioat->desc_mz =
> > rte_memzone_reserve(mz_name, +			(DESC_SZ +
> > COMPLETION_SZ) * ioat->ring_size, +
> > dev->device->numa_node, RTE_MEMZONE_IOVA_CONTIG); +	if (ioat->desc_mz
> > == NULL) +		return -ENOMEM; +	ioat->desc_ring =
> > ioat->desc_mz->addr; +	ioat->hdls = (void
> > *)&ioat->desc_ring[ioat->ring_size]; + +	ioat->ring_addr =
> > ioat->desc_mz->iova; + +	/* configure descriptor ring - each one
> > points to next */ +	for (i = 0; i < ioat->ring_size; i++) { +
> > ioat->desc_ring[i].next = ioat->ring_addr + +
> > (((i + 1) % ioat->ring_size) * DESC_SZ); +	} + +	return 0; +} +
> > +static int +ioat_dev_start(struct rte_rawdev *dev) +{ +	struct
> > rte_ioat_rawdev *ioat = dev->dev_private; + +	if (ioat->ring_size
> > == 0 || ioat->desc_ring == NULL) +		return -EBUSY; + +	/*
> > inform hardware of where the descriptor ring is */ +
> > ioat->regs->chainaddr = ioat->ring_addr; +	/* inform hardware of where
> > to write the status/completions */ +	ioat->regs->chancmp =
> > ioat->status_addr; + +	/* prime the status register to be set to
> > the last element */ +	ioat->status =  ioat->ring_addr +
> > ((ioat->ring_size - 1) * DESC_SZ); +	return 0; +} + +static void
> > +ioat_dev_stop(struct rte_rawdev *dev) +{ +	RTE_SET_USED(dev); +} +
> > static void ioat_dev_info_get(struct rte_rawdev *dev, rte_rawdev_obj_t
> > dev_info) { @@ -44,11 +119,17 @@ ioat_dev_info_get(struct rte_rawdev
> > *dev, rte_rawdev_obj_t dev_info) cfg->ring_size = ioat->ring_size; }
> >  
> > +extern int ioat_rawdev_test(uint16_t dev_id); +
> 
> This signature doesn't match with the rte_rawdev_ops definition (which
> should be int(*func)(void)).
> 
> It will generate an error as such:
> 
> ../drivers/raw/ioat/ioat_rawdev.c:176:20: error: initialization from
> incompatible pointer type [-Werror=incompatible-pointer-types]
> .dev_selftest = ioat_rawdev_test, ^
> ../drivers/raw/ioat/ioat_rawdev.c:176:20: note: (near initialization for
> ‘ioat_rawdev_ops.dev_selftest’)
> 
That was changed by commit 863fd2930bbe ("rawdev: pass the device id as
parameter to selftest") which was part of the patchset on which this set
depended.

/Bruce


More information about the dev mailing list