[dpdk-dev] [PATCH v5 7/9] raw/ioat: add configure, start and stop functions

[Aaron Conole]

Bruce Richardson <bruce.richardson at intel.com> writes:

> On Wed, Jul 03, 2019 at 12:21:39PM -0400, Aaron Conole wrote:
>> Bruce Richardson <bruce.richardson at intel.com> writes:
>> 
>> > Allow initializing a driver instance. Include selftest to validate
>> > these functions.
>> >
>> > Signed-off-by: Bruce Richardson <bruce.richardson at intel.com> Acked-by:
>> > Anatoly Burakov <anatoly.burakov at intel.com> Tested-by: Harry van Haaren
>> > <harry.van.haaren at intel.com> ---
>> >
>> > V4: Guarantee correct SUCCESS/FAILURE return values from test function
>> > Use memzone rather than malloc for ring allocation so we can guarantee
>> > contiguous memory.  V3: don't add a new descriptor format struct, reuse
>> > from rte_ioat_spec.h V2: test cases placed in self-test routine ---
>> > app/test/test_rawdev.c              |  3 +-
>> > doc/guides/rawdevs/ioat_rawdev.rst  | 32 +++++++++++
>> > drivers/raw/ioat/Makefile           |  1 +
>> > drivers/raw/ioat/ioat_rawdev.c      | 82 +++++++++++++++++++++++++++++
>> > drivers/raw/ioat/ioat_rawdev_test.c | 41 +++++++++++++++
>> > drivers/raw/ioat/meson.build        |  3 +-
>> > drivers/raw/ioat/rte_ioat_rawdev.h  |  2 + 7 files changed, 162
>> > insertions(+), 2 deletions(-) create mode 100644
>> > drivers/raw/ioat/ioat_rawdev_test.c
>> >
>> > diff --git a/app/test/test_rawdev.c b/app/test/test_rawdev.c index
>> > 623117af9..524a9d5f3 100644 --- a/app/test/test_rawdev.c +++
>> > b/app/test/test_rawdev.c @@ -36,7 +36,8 @@
>> > test_rawdev_selftest_ioat(void) struct rte_rawdev_info info = {
>> > .dev_private = NULL }; if (rte_rawdev_info_get(i, &info) == 0 &&
>> > strstr(info.driver_name, "ioat") != NULL) -			return
>> > TEST_SUCCESS; +			return rte_rawdev_selftest(i) == 0
>> > ?  +					TEST_SUCCESS : TEST_FAILED;
>> > }
>> >  
>> >  	printf("No IOAT rawdev found, skipping tests\n"); diff --git
>> >  	a/doc/guides/rawdevs/ioat_rawdev.rst
>> >  	b/doc/guides/rawdevs/ioat_rawdev.rst index efed9c64c..a0594d2cb
>> >  	100644 --- a/doc/guides/rawdevs/ioat_rawdev.rst +++
>> >  	b/doc/guides/rawdevs/ioat_rawdev.rst @@ -117,3 +117,35 @@ the
>> >  	``dev_private`` field in the ``rte_rawdev_info`` struct should
>> >  	either be NULL, or else be set to point to a structure of type
>> >  	``rte_ioat_rawdev_config``, in which case the size of the
>> >  	configured device input ring will be returned in that structure.  +
>> >  	+Device Configuration +~~~~~~~~~~~~~~~~~~~~~ + +Configuring an IOAT
>> >  	rawdev device is done using the +``rte_rawdev_configure()`` API,
>> >  	which takes the same structure parameters +as the, previously
>> >  	referenced, ``rte_rawdev_info_get()`` API. The main +difference is
>> >  	that, because the parameter is used as input rather than +output,
>> >  	the ``dev_private`` structure element cannot be NULL, and must
>> >  	+point to a valid ``rte_ioat_rawdev_config`` structure, containing
>> >  	the ring +size to be used by the device. The ring size must be a
>> >  	power of two, +between 64 and 4096.  + +The following code shows
>> >  	how the device is configured in +``test_ioat_rawdev.c``: + +..
>> >  	code-block:: C + +   #define IOAT_TEST_RINGSIZE 512 +        struct
>> >  	rte_ioat_rawdev_config p = { .ring_size = -1 }; +        struct
>> >  	rte_rawdev_info info = { .dev_private = &p }; + +        /* ... */
>> >  	+ +        p.ring_size = IOAT_TEST_RINGSIZE; +        if
>> >  	(rte_rawdev_configure(dev_id, &info) != 0) { +
>> >  	printf("Error with rte_rawdev_configure()\n"); +
>> >  	return -1; +        } + +Once configured, the device can then be
>> >  	made ready for use by calling the +``rte_rawdev_start()`` API.
>> >  	diff --git a/drivers/raw/ioat/Makefile b/drivers/raw/ioat/Makefile
>> >  	index 1e10938f3..b1af9c666 100644 --- a/drivers/raw/ioat/Makefile
>> >  	+++ b/drivers/raw/ioat/Makefile @@ -21,6 +21,7 @@ EXPORT_MAP :=
>> >  	rte_pmd_ioat_version.map
>> >  
>> >  # library source files SRCS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) +=
>> >  ioat_rawdev.c +SRCS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) +=
>> >  ioat_rawdev_test.c
>> >  
>> >  # export include files SYMLINK-y-include += rte_ioat_rawdev.h diff
>> >  --git a/drivers/raw/ioat/ioat_rawdev.c
>> >  b/drivers/raw/ioat/ioat_rawdev.c index 2bfe2544d..0c91b3579 100644 ---
>> >  a/drivers/raw/ioat/ioat_rawdev.c +++ b/drivers/raw/ioat/ioat_rawdev.c
>> >  @@ -34,6 +34,81 @@ static struct rte_pci_driver ioat_pmd_drv; #define
>> >  IOAT_PMD_ERR(fmt, args...)    IOAT_PMD_LOG(ERR, fmt, ## args) #define
>> >  IOAT_PMD_WARN(fmt, args...)   IOAT_PMD_LOG(WARNING, fmt, ## args)
>> >  
>> > +#define DESC_SZ sizeof(struct rte_ioat_generic_hw_desc) +#define
>> > COMPLETION_SZ sizeof(__m128i) + +static int +ioat_dev_configure(const
>> > struct rte_rawdev *dev, rte_rawdev_obj_t config) +{ +	struct
>> > rte_ioat_rawdev_config *params = config; +	struct rte_ioat_rawdev
>> > *ioat = dev->dev_private; +	char mz_name[RTE_MEMZONE_NAMESIZE]; +
>> > unsigned short i; + +	if (dev->started) +		return
>> > -EBUSY; + +	if (params == NULL) +		return -EINVAL; + +	if
>> > (params->ring_size > 4096 || params->ring_size < 64 || +
>> > !rte_is_power_of_2(params->ring_size)) +		return -EINVAL; + +
>> > ioat->ring_size = params->ring_size; +	if (ioat->desc_ring !=
>> > NULL) { +		rte_memzone_free(ioat->desc_mz); +
>> > ioat->desc_ring = NULL; +		ioat->desc_mz = NULL; +	} + +	/*
>> > allocate one block of memory for both descriptors +	 * and completion
>> > handles.  +	 */ +	snprintf(mz_name, sizeof(mz_name),
>> > "rawdev%u_desc_ring", dev->dev_id); +	ioat->desc_mz =
>> > rte_memzone_reserve(mz_name, +			(DESC_SZ +
>> > COMPLETION_SZ) * ioat->ring_size, +
>> > dev->device->numa_node, RTE_MEMZONE_IOVA_CONTIG); +	if (ioat->desc_mz
>> > == NULL) +		return -ENOMEM; +	ioat->desc_ring =
>> > ioat->desc_mz->addr; +	ioat->hdls = (void
>> > *)&ioat->desc_ring[ioat->ring_size]; + +	ioat->ring_addr =
>> > ioat->desc_mz->iova; + +	/* configure descriptor ring - each one
>> > points to next */ +	for (i = 0; i < ioat->ring_size; i++) { +
>> > ioat->desc_ring[i].next = ioat->ring_addr + +
>> > (((i + 1) % ioat->ring_size) * DESC_SZ); +	} + +	return 0; +} +
>> > +static int +ioat_dev_start(struct rte_rawdev *dev) +{ +	struct
>> > rte_ioat_rawdev *ioat = dev->dev_private; + +	if (ioat->ring_size
>> > == 0 || ioat->desc_ring == NULL) +		return -EBUSY; + +	/*
>> > inform hardware of where the descriptor ring is */ +
>> > ioat->regs->chainaddr = ioat->ring_addr; +	/* inform hardware of where
>> > to write the status/completions */ +	ioat->regs->chancmp =
>> > ioat->status_addr; + +	/* prime the status register to be set to
>> > the last element */ +	ioat->status =  ioat->ring_addr +
>> > ((ioat->ring_size - 1) * DESC_SZ); +	return 0; +} + +static void
>> > +ioat_dev_stop(struct rte_rawdev *dev) +{ +	RTE_SET_USED(dev); +} +
>> > static void ioat_dev_info_get(struct rte_rawdev *dev, rte_rawdev_obj_t
>> > dev_info) { @@ -44,11 +119,17 @@ ioat_dev_info_get(struct rte_rawdev
>> > *dev, rte_rawdev_obj_t dev_info) cfg->ring_size = ioat->ring_size; }
>> >  
>> > +extern int ioat_rawdev_test(uint16_t dev_id); +
>> 
>> This signature doesn't match with the rte_rawdev_ops definition (which
>> should be int(*func)(void)).
>> 
>> It will generate an error as such:
>> 
>> ../drivers/raw/ioat/ioat_rawdev.c:176:20: error: initialization from
>> incompatible pointer type [-Werror=incompatible-pointer-types]
>> .dev_selftest = ioat_rawdev_test, ^
>> ../drivers/raw/ioat/ioat_rawdev.c:176:20: note: (near initialization for
>> ‘ioat_rawdev_ops.dev_selftest’)
>> 
> That was changed by commit 863fd2930bbe ("rawdev: pass the device id as
> parameter to selftest") which was part of the patchset on which this set
> depended.

Strange - the robot didn't pick that commit up.  Was this submitted
before that commit was live?

> /Bruce