[dpdk-dev] [PATCH v1 57/58] net/octeontx2: add MTU set operation
jerinj at marvell.com
jerinj at marvell.com
Sun Jun 2 17:24:33 CEST 2019
From: Vamsi Attunuru <vattunuru at marvell.com>
Add MTU set operation and MTU update feature.
Signed-off-by: Vamsi Attunuru <vattunuru at marvell.com>
Signed-off-by: Sunil Kumar Kori <skori at marvell.com>
---
doc/guides/nics/features/octeontx2.ini | 1 +
doc/guides/nics/features/octeontx2_vec.ini | 1 +
drivers/net/octeontx2/otx2_ethdev.c | 7 ++
drivers/net/octeontx2/otx2_ethdev.h | 4 ++
drivers/net/octeontx2/otx2_ethdev_ops.c | 80 ++++++++++++++++++++++
5 files changed, 93 insertions(+)
diff --git a/doc/guides/nics/features/octeontx2.ini b/doc/guides/nics/features/octeontx2.ini
index 396979451..e96c588fa 100644
--- a/doc/guides/nics/features/octeontx2.ini
+++ b/doc/guides/nics/features/octeontx2.ini
@@ -15,6 +15,7 @@ Link status event = Y
Fast mbuf free = Y
Free Tx mbuf on demand = Y
Queue start/stop = Y
+MTU update = Y
Promiscuous mode = Y
Allmulticast mode = Y
Unicast MAC filter = Y
diff --git a/doc/guides/nics/features/octeontx2_vec.ini b/doc/guides/nics/features/octeontx2_vec.ini
index 1435fd91e..7ad097df4 100644
--- a/doc/guides/nics/features/octeontx2_vec.ini
+++ b/doc/guides/nics/features/octeontx2_vec.ini
@@ -15,6 +15,7 @@ Link status event = Y
Fast mbuf free = Y
Free Tx mbuf on demand = Y
Queue start/stop = Y
+MTU update = Y
Promiscuous mode = Y
Allmulticast mode = Y
Unicast MAC filter = Y
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index 6c67cecd5..ddd924ce8 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -1453,6 +1453,12 @@ otx2_nix_dev_start(struct rte_eth_dev *eth_dev)
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
int rc, i;
+ if (eth_dev->data->nb_rx_queues != 0) {
+ rc = otx2_nix_recalc_mtu(eth_dev);
+ if (rc)
+ return rc;
+ }
+
/* Start rx queues */
for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
rc = otx2_nix_rx_queue_start(eth_dev, i);
@@ -1525,6 +1531,7 @@ static const struct eth_dev_ops otx2_eth_dev_ops = {
.stats_get = otx2_nix_dev_stats_get,
.stats_reset = otx2_nix_dev_stats_reset,
.get_reg = otx2_nix_dev_get_reg,
+ .mtu_set = otx2_nix_mtu_set,
.mac_addr_add = otx2_nix_mac_addr_add,
.mac_addr_remove = otx2_nix_mac_addr_del,
.mac_addr_set = otx2_nix_mac_addr_set,
diff --git a/drivers/net/octeontx2/otx2_ethdev.h b/drivers/net/octeontx2/otx2_ethdev.h
index dff4de250..862a1ccbb 100644
--- a/drivers/net/octeontx2/otx2_ethdev.h
+++ b/drivers/net/octeontx2/otx2_ethdev.h
@@ -351,6 +351,10 @@ int otx2_nix_tx_queue_start(struct rte_eth_dev *eth_dev, uint16_t qidx);
int otx2_nix_tx_queue_stop(struct rte_eth_dev *eth_dev, uint16_t qidx);
uint64_t otx2_nix_rxq_mbuf_setup(struct otx2_eth_dev *dev, uint16_t port_id);
+/* MTU */
+int otx2_nix_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu);
+int otx2_nix_recalc_mtu(struct rte_eth_dev *eth_dev);
+
/* Link */
void otx2_nix_toggle_flag_link_cfg(struct otx2_eth_dev *dev, bool set);
int otx2_nix_link_update(struct rte_eth_dev *eth_dev, int wait_to_complete);
diff --git a/drivers/net/octeontx2/otx2_ethdev_ops.c b/drivers/net/octeontx2/otx2_ethdev_ops.c
index d2cb5ba1c..e8959e179 100644
--- a/drivers/net/octeontx2/otx2_ethdev_ops.c
+++ b/drivers/net/octeontx2/otx2_ethdev_ops.c
@@ -6,6 +6,86 @@
#include "otx2_ethdev.h"
+int
+otx2_nix_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
+{
+ uint32_t buffsz, frame_size = mtu + NIX_HW_L2_OVERHEAD;
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct rte_eth_dev_data *data = eth_dev->data;
+ struct otx2_mbox *mbox = dev->mbox;
+ struct nix_frs_cfg *req;
+ int rc;
+
+ /* Check if MTU is within the allowed range */
+ if (frame_size < NIX_MIN_HW_FRS || frame_size > NIX_MAX_HW_FRS)
+ return -EINVAL;
+
+ buffsz = data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM;
+
+ /* Refuse MTU that requires the support of scattered packets
+ * when this feature has not been enabled before.
+ */
+ if (data->dev_started && frame_size > buffsz &&
+ !(dev->rx_offloads & DEV_RX_OFFLOAD_SCATTER))
+ return -EINVAL;
+
+ /* Check <seg size> * <max_seg> >= max_frame */
+ if ((dev->rx_offloads & DEV_RX_OFFLOAD_SCATTER) &&
+ (frame_size > buffsz * NIX_RX_NB_SEG_MAX))
+ return -EINVAL;
+
+ req = otx2_mbox_alloc_msg_nix_set_hw_frs(mbox);
+ req->update_smq = true;
+ req->maxlen = frame_size;
+
+ rc = otx2_mbox_process(mbox);
+ if (rc)
+ return rc;
+
+ if (frame_size > RTE_ETHER_MAX_LEN)
+ dev->rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ else
+ dev->rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
+
+ /* Update max_rx_pkt_len */
+ data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+
+ return rc;
+}
+
+int
+otx2_nix_recalc_mtu(struct rte_eth_dev *eth_dev)
+{
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct rte_eth_dev_data *data = eth_dev->data;
+ struct rte_pktmbuf_pool_private *mbp_priv;
+ struct otx2_eth_rxq *rxq;
+ uint32_t buffsz;
+ uint16_t mtu;
+ int rc;
+
+ /* Get rx buffer size */
+ rxq = data->rx_queues[0];
+ mbp_priv = rte_mempool_get_priv(rxq->pool);
+ buffsz = mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM;
+
+ /* Setup scatter mode if needed by jumbo */
+ if (data->dev_conf.rxmode.max_rx_pkt_len > buffsz)
+ dev->rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
+
+ /* Setup MTU based on max_rx_pkt_len or default */
+ mtu = ((dev->rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) ||
+ (data->dev_conf.rxmode.max_rx_pkt_len < RTE_ETHER_MAX_LEN)) ?
+ data->dev_conf.rxmode.max_rx_pkt_len - NIX_HW_L2_OVERHEAD :
+ RTE_ETHER_MTU;
+
+ rc = otx2_nix_mtu_set(eth_dev, mtu);
+ if (rc)
+ otx2_err("Failed to set default MTU size %d", rc);
+
+ return rc;
+}
+
static void
nix_cgx_promisc_config(struct rte_eth_dev *eth_dev, int en)
{
--
2.21.0
More information about the dev
mailing list