[dpdk-dev] [PATCH v1 58/58] doc: add Marvell OCTEON TX2 ethdev documentation
jerinj at marvell.com
jerinj at marvell.com
Sun Jun 2 17:24:34 CEST 2019
From: Jerin Jacob <jerinj at marvell.com>
Add Marvell OCTEON TX2 ethdev documentation.
This patch also updates the MAINTAINERS file and
shared library versions in release_19_08.rst.
Cc: John McNamara <john.mcnamara at intel.com>
Cc: Thomas Monjalon <thomas at monjalon.net>
Signed-off-by: Jerin Jacob <jerinj at marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru at marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark at marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram at marvell.com>
---
MAINTAINERS | 8 +
doc/guides/nics/features/octeontx2.ini | 1 +
doc/guides/nics/features/octeontx2_vec.ini | 1 +
doc/guides/nics/features/octeontx2_vf.ini | 1 +
doc/guides/nics/index.rst | 1 +
doc/guides/nics/octeontx2.rst | 289 +++++++++++++++++++++
doc/guides/platform/octeontx2.rst | 3 +
doc/guides/rel_notes/release_19_05.rst | 1 +
8 files changed, 305 insertions(+)
create mode 100644 doc/guides/nics/octeontx2.rst
diff --git a/MAINTAINERS b/MAINTAINERS
index 74ac6d41f..fe509c1f9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -668,6 +668,14 @@ F: drivers/net/mvneta/
F: doc/guides/nics/mvneta.rst
F: doc/guides/nics/features/mvneta.ini
+Marvell OCTEON TX2
+M: Jerin Jacob <jerinj at marvell.com>
+M: Nithin Dabilpuram <ndabilpuram at marvell.com>
+M: Kiran Kumar K <kirankumark at marvell.com>
+F: drivers/net/octeontx2/
+F: doc/guides/nics/features/octeontx2*.rst
+F: doc/guides/nics/octeontx2.rst
+
Mellanox mlx4
M: Matan Azrad <matan at mellanox.com>
M: Shahaf Shuler <shahafs at mellanox.com>
diff --git a/doc/guides/nics/features/octeontx2.ini b/doc/guides/nics/features/octeontx2.ini
index e96c588fa..ef1a638e9 100644
--- a/doc/guides/nics/features/octeontx2.ini
+++ b/doc/guides/nics/features/octeontx2.ini
@@ -44,3 +44,4 @@ Extended stats = Y
FW version = Y
Module EEPROM dump = Y
Registers dump = Y
+Usage doc = Y
diff --git a/doc/guides/nics/features/octeontx2_vec.ini b/doc/guides/nics/features/octeontx2_vec.ini
index 7ad097df4..8f95727f7 100644
--- a/doc/guides/nics/features/octeontx2_vec.ini
+++ b/doc/guides/nics/features/octeontx2_vec.ini
@@ -41,3 +41,4 @@ Stats per queue = Y
FW version = Y
Module EEPROM dump = Y
Registers dump = Y
+Usage doc = Y
diff --git a/doc/guides/nics/features/octeontx2_vf.ini b/doc/guides/nics/features/octeontx2_vf.ini
index 0d5137316..e78385bb2 100644
--- a/doc/guides/nics/features/octeontx2_vf.ini
+++ b/doc/guides/nics/features/octeontx2_vf.ini
@@ -36,3 +36,4 @@ Stats per queue = Y
FW version = Y
Module EEPROM dump = Y
Registers dump = Y
+Usage doc = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 2221c35f2..6fa075594 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -44,6 +44,7 @@ Network Interface Controller Drivers
nfb
nfp
octeontx
+ octeontx2
qede
sfc_efx
softnic
diff --git a/doc/guides/nics/octeontx2.rst b/doc/guides/nics/octeontx2.rst
new file mode 100644
index 000000000..2f14a4a1c
--- /dev/null
+++ b/doc/guides/nics/octeontx2.rst
@@ -0,0 +1,289 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(C) 2019 Marvell International Ltd.
+
+OCTEON TX2 Poll Mode driver
+===========================
+
+The OCTEON TX2 ETHDEV PMD (**librte_pmd_octeontx2**) provides poll mode ethdev
+driver support for the inbuilt network device found in **Marvell OCTEON TX2**
+SoC family as well as for their virtual functions (VF) in SR-IOV context.
+
+More information can be found at `Marvell Official Website
+<https://www.marvell.com/embedded-processors/infrastructure-processors>`_.
+
+Features
+--------
+
+Features of the OCTEON TX2 Ethdev PMD are:
+
+- Packet type information
+- Promiscuous mode
+- Port hardware statistics
+- Jumbo frames
+- SR-IOV VF
+- Lock-free Tx queue
+- Multiple queues for TX and RX
+- Receiver Side Scaling (RSS)
+- MAC/VLAN filtering
+- Generic flow API
+- Inner and Outer Checksum offload
+- VLAN/QinQ stripping and insertion
+- Port hardware statistics
+- Link state information
+- Link flow control
+- MTU update
+- Scatter-Gather IO support
+- Vector Poll mode driver
+- Debug utilities - Context dump and error interrupt support
+- IEEE1588 timestamping
+- HW offloaded `ethdev Rx queue` to `eventdev event queue` packet injection
+
+Prerequisites
+-------------
+
+See :doc:`../platform/octeontx2` for setup information.
+
+Compile time Config Options
+---------------------------
+
+The following options may be modified in the ``config`` file.
+
+- ``CONFIG_RTE_LIBRTE_OCTEONTX2_PMD`` (default ``y``)
+
+ Toggle compilation of the ``librte_pmd_octeontx2`` driver.
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+To compile the OCTEON TX2 PMD for Linux arm64 gcc,
+use arm64-octeontx2-linux-gcc as target.
+
+#. Running testpmd:
+
+ Follow instructions available in the document
+ :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+ to run testpmd.
+
+ Example output:
+
+ .. code-block:: console
+
+ ./build/app/testpmd -c 0x300 -w 0002:02:00.0 -- --portmask=0x1 --nb-cores=1 --port-topology=loop --rxq=1 --txq=1
+ EAL: Detected 24 lcore(s)
+ EAL: Detected 1 NUMA nodes
+ EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
+ EAL: No available hugepages reported in hugepages-2048kB
+ EAL: Probing VFIO support...
+ EAL: VFIO support initialized
+ EAL: PCI device 0002:02:00.0 on NUMA socket 0
+ EAL: probe driver: 177d:a063 net_octeontx2
+ EAL: using IOMMU type 1 (Type 1)
+ testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=267456, size=2176, socket=0
+ testpmd: preferred mempool ops selected: octeontx2_npa
+ Configuring Port 0 (socket 0)
+ PMD: Port 0: Link Up - speed 40000 Mbps - full-duplex
+
+ Port 0: link state change event
+ Port 0: 36:10:66:88:7A:57
+ Checking link statuses...
+ Done
+ No commandline core given, start packet forwarding
+ io packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP allocation mode: native
+ Logical Core 9 (socket 0) forwards packets on 1 streams:
+ RX P=0/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
+
+ io packet forwarding packets/burst=32
+ nb forwarding cores=1 - nb forwarding ports=1
+ port 0: RX queue number: 1 Tx queue number: 1
+ Rx offloads=0x0 Tx offloads=0x10000
+ RX queue: 0
+ RX desc=512 - RX free threshold=0
+ RX threshold registers: pthresh=0 hthresh=0 wthresh=0
+ RX Offloads=0x0
+ TX queue: 0
+ TX desc=512 - TX free threshold=0
+ TX threshold registers: pthresh=0 hthresh=0 wthresh=0
+ TX offloads=0x10000 - TX RS bit threshold=0
+ Press enter to exit
+
+Runtime Config Options
+----------------------
+
+- ``HW offload ptype parsing disable`` (default ``0``)
+
+ Packet type parsing is HW offloaded by default and this feature may be toggled
+ using ``ptype_disable`` ``devargs`` parameter.
+
+- ``Rx scalar mode enable`` (default ``0``)
+
+ Ethdev rx supports both scalar and vector mode, it may be selected at runtime
+ using ``scalar_enable`` ``devargs`` parameter.
+
+- ``RSS reta size`` (default ``64``)
+
+ RSS redirection table size may be configured during runtime using ``reta_size``
+ ``devargs`` parameter.
+
+ For example::
+
+ -w 0002:02:00.0,reta_size=256
+
+ With the above configuration, reta table of size 256 is populated.
+
+- ``Flow priority levels`` (default ``3``)
+
+ RTE Flow priority levels can be configured during runtime using
+ ``flow_max_priority`` ``devargs`` parameter.
+
+ For example::
+
+ -w 0002:02:00.0,flow_max_priority=10
+
+ With the above configuration, priority level was set to 10 (0-9). Max
+ priority level supported is 32.
+
+- ``Reserve Flow entries`` (default ``8``)
+
+ RTE flow entries can be pre allocated and the size of pre allocation can be
+ selected runtime using ``flow_prealloc_size`` ``devargs`` parameter.
+
+ For example::
+
+ -w 0002:02:00.0,flow_prealloc_size=4
+
+ With the above configuration, pre alloc size was set to 4. Max pre alloc
+ size supported is 32.
+
+.. note::
+
+ Above devarg parameters are configurable per device, user needs to pass the
+ parameters to all the PCIe devices if application requires to configure on
+ all the ethdev ports.
+
+Limitations
+-----------
+
+``mempool_octeontx2`` external mempool handler dependency
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The OCTEON TX2 SoC family NIC has inbuilt HW assisted external mempool manager.
+``net_octeontx2`` pmd only works with ``mempool_octeontx2`` mempool handler
+as it is performance wise most effective way for packet allocation and Tx buffer
+recycling on OCTEON TX2 SoC platform.
+
+CRC striping
+~~~~~~~~~~~~
+
+The OCTEON TX2 SoC family NICs strip the CRC for every packet being received by
+the host interface irrespective of the offload configuration.
+
+
+Debugging Options
+-----------------
+
+.. _table_octeontx2_ethdev_debug_options:
+
+.. table:: OCTEON TX2 ethdev debug options
+
+ +---+------------+-------------------------------------------------------+
+ | # | Component | EAL log command |
+ +===+============+=======================================================+
+ | 1 | NIX | --log-level='pmd\.net.octeontx2,8' |
+ +---+------------+-------------------------------------------------------+
+ | 2 | NPC | --log-level='pmd\.net.octeontx2\.flow,8' |
+ +---+------------+-------------------------------------------------------+
+
+RTE Flow Support
+----------------
+
+The OCTEON TX2 SoC family NIC has support for the following patterns and
+actions.
+
+Patterns:
+
+.. _table_octeontx2_supported_flow_item_types:
+
+.. table:: Item types
+
+ +----+--------------------------------+
+ | # | Pattern Type |
+ +====+================================+
+ | 1 | RTE_FLOW_ITEM_TYPE_ETH |
+ +----+--------------------------------+
+ | 2 | RTE_FLOW_ITEM_TYPE_VLAN |
+ +----+--------------------------------+
+ | 3 | RTE_FLOW_ITEM_TYPE_E_TAG |
+ +----+--------------------------------+
+ | 4 | RTE_FLOW_ITEM_TYPE_IPV4 |
+ +----+--------------------------------+
+ | 5 | RTE_FLOW_ITEM_TYPE_IPV6 |
+ +----+--------------------------------+
+ | 6 | RTE_FLOW_ITEM_TYPE_ARP_ETH_IPV4|
+ +----+--------------------------------+
+ | 7 | RTE_FLOW_ITEM_TYPE_MPLS |
+ +----+--------------------------------+
+ | 8 | RTE_FLOW_ITEM_TYPE_ICMP |
+ +----+--------------------------------+
+ | 9 | RTE_FLOW_ITEM_TYPE_UDP |
+ +----+--------------------------------+
+ | 10 | RTE_FLOW_ITEM_TYPE_TCP |
+ +----+--------------------------------+
+ | 11 | RTE_FLOW_ITEM_TYPE_SCTP |
+ +----+--------------------------------+
+ | 12 | RTE_FLOW_ITEM_TYPE_ESP |
+ +----+--------------------------------+
+ | 13 | RTE_FLOW_ITEM_TYPE_GRE |
+ +----+--------------------------------+
+ | 14 | RTE_FLOW_ITEM_TYPE_NVGRE |
+ +----+--------------------------------+
+ | 15 | RTE_FLOW_ITEM_TYPE_VXLAN |
+ +----+--------------------------------+
+ | 16 | RTE_FLOW_ITEM_TYPE_GTPC |
+ +----+--------------------------------+
+ | 17 | RTE_FLOW_ITEM_TYPE_GTPU |
+ +----+--------------------------------+
+ | 18 | RTE_FLOW_ITEM_TYPE_VOID |
+ +----+--------------------------------+
+ | 19 | RTE_FLOW_ITEM_TYPE_ANY |
+ +----+--------------------------------+
+
+Actions:
+
+.. _table_octeontx2_supported_ingress_action_types:
+
+.. table:: Ingress action types
+
+ +----+--------------------------------+
+ | # | Action Type |
+ +====+================================+
+ | 1 | RTE_FLOW_ACTION_TYPE_VOID |
+ +----+--------------------------------+
+ | 2 | RTE_FLOW_ACTION_TYPE_MARK |
+ +----+--------------------------------+
+ | 3 | RTE_FLOW_ACTION_TYPE_FLAG |
+ +----+--------------------------------+
+ | 4 | RTE_FLOW_ACTION_TYPE_COUNT |
+ +----+--------------------------------+
+ | 5 | RTE_FLOW_ACTION_TYPE_DROP |
+ +----+--------------------------------+
+ | 6 | RTE_FLOW_ACTION_TYPE_QUEUE |
+ +----+--------------------------------+
+ | 7 | RTE_FLOW_ACTION_TYPE_RSS |
+ +----+--------------------------------+
+ | 8 | RTE_FLOW_ACTION_TYPE_SECURITY |
+ +----+--------------------------------+
+
+.. _table_octeontx2_supported_egress_action_types:
+
+.. table:: Egress action types
+
+ +----+--------------------------------+
+ | # | Action Type |
+ +====+================================+
+ | 1 | RTE_FLOW_ACTION_TYPE_COUNT |
+ +----+--------------------------------+
+ | 2 | RTE_FLOW_ACTION_TYPE_DROP |
+ +----+--------------------------------+
diff --git a/doc/guides/platform/octeontx2.rst b/doc/guides/platform/octeontx2.rst
index c9ea45647..d2592f119 100644
--- a/doc/guides/platform/octeontx2.rst
+++ b/doc/guides/platform/octeontx2.rst
@@ -98,6 +98,9 @@ HW Offload Drivers
This section lists dataplane H/W block(s) available in OCTEON TX2 SoC.
+#. **Ethdev Driver**
+ See :doc:`../nics/octeontx2` for NIX Ethdev driver information.
+
#. **Mempool Driver**
See :doc:`../mempool/octeontx2` for NPA mempool driver information.
diff --git a/doc/guides/rel_notes/release_19_05.rst b/doc/guides/rel_notes/release_19_05.rst
index b4c6972e3..e925ccf0e 100644
--- a/doc/guides/rel_notes/release_19_05.rst
+++ b/doc/guides/rel_notes/release_19_05.rst
@@ -386,6 +386,7 @@ The libraries prepended with a plus sign were incremented in this version.
librte_pmd_i40e.so.2
librte_pmd_ixgbe.so.2
librte_pmd_dpaa2_qdma.so.1
+ + librte_pmd_octeontx2.so.1
librte_pmd_ring.so.2
librte_pmd_softnic.so.1
librte_pmd_vhost.so.2
--
2.21.0
More information about the dev
mailing list