[dpdk-dev] [PATCH v5 15/20] doc: remove references to make from rawdevs guides

Xu, Rosen rosen.xu at intel.com
Fri Oct 2 16:57:31 CEST 2020
Previous message: [dpdk-dev] [PATCH v5 15/20] doc: remove references to make from rawdevs guides
Next message: [dpdk-dev] [PATCH] hash: build on Windows
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Hi,

> -----Original Message-----
> From: Power, Ciara <ciara.power at intel.com>
> Sent: Monday, September 21, 2020 21:59
> To: dev at dpdk.org
> Cc: Power, Ciara <ciara.power at intel.com>; Nipun Gupta
> <nipun.gupta at nxp.com>; Mcnamara, John <john.mcnamara at intel.com>;
> Kovacevic, Marko <marko.kovacevic at intel.com>; Xu, Rosen
> <rosen.xu at intel.com>; Zhang, Tianfei <tianfei.zhang at intel.com>;
> Richardson, Bruce <bruce.richardson at intel.com>; Li, Xiaoyun
> <xiaoyun.li at intel.com>; Wu, Jingjing <jingjing.wu at intel.com>; Satha Rao
> <skoteshwar at marvell.com>; Mahipal Challa <mchalla at marvell.com>
> Subject: [PATCH v5 15/20] doc: remove references to make from rawdevs
> guides
> 
> Make is no longer supported for compiling DPDK, references are now
> removed in the documentation.
> 
> Signed-off-by: Ciara Power <ciara.power at intel.com>
> Reviewed-by: Kevin Laatz <kevin.laatz at intel.com>
> ---
>  doc/guides/rawdevs/dpaa2_cmdif.rst   | 21 ---------------------
>  doc/guides/rawdevs/dpaa2_qdma.rst    | 21 ---------------------
>  doc/guides/rawdevs/ifpga.rst         | 10 ----------
>  doc/guides/rawdevs/ioat.rst          |  8 +-------
>  doc/guides/rawdevs/ntb.rst           |  6 ------
>  doc/guides/rawdevs/octeontx2_dma.rst | 12 ------------
> doc/guides/rawdevs/octeontx2_ep.rst  |  8 --------
>  7 files changed, 1 insertion(+), 85 deletions(-)
> 
> diff --git a/doc/guides/rawdevs/dpaa2_cmdif.rst
> b/doc/guides/rawdevs/dpaa2_cmdif.rst
> index be9805874b..7ac3963938 100644
> --- a/doc/guides/rawdevs/dpaa2_cmdif.rst
> +++ b/doc/guides/rawdevs/dpaa2_cmdif.rst
> @@ -44,17 +44,6 @@ Currently supported by DPDK:
>     Some part of fslmc bus code (mc flib - object library) routines are
>     dual licensed (BSD & GPLv2).
> 
> -Pre-Installation Configuration
> -------------------------------
> -
> -Config File Options
> -~~~~~~~~~~~~~~~~~~~
> -
> -The following options can be modified in the ``config`` file.
> -
> -- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV`` (default ``y``)
> -
> -  Toggle compilation of the ``lrte_pmd_dpaa2_cmdif`` driver.
> 
>  Enabling logs
>  -------------
> @@ -68,16 +57,6 @@ For enabling logs, use the following EAL parameter:
>  Using ``pmd.raw.dpaa2.cmdif`` as log matching criteria, all Event PMD logs
> can be  enabled which are lower than logging ``level``.
> 
> -Driver Compilation
> -~~~~~~~~~~~~~~~~~~
> -
> -To compile the DPAA2 CMDIF PMD for Linux arm64 gcc target, run the -
> following ``make`` command:
> -
> -.. code-block:: console
> -
> -   cd <DPDK-source-directory>
> -   make config T=arm64-dpaa-linux-gcc install
> 
>  Initialization
>  --------------
> diff --git a/doc/guides/rawdevs/dpaa2_qdma.rst
> b/doc/guides/rawdevs/dpaa2_qdma.rst
> index 129e83d5ef..92921fafdd 100644
> --- a/doc/guides/rawdevs/dpaa2_qdma.rst
> +++ b/doc/guides/rawdevs/dpaa2_qdma.rst
> @@ -48,17 +48,6 @@ Currently supported by DPDK:
>     Some part of fslmc bus code (mc flib - object library) routines are
>     dual licensed (BSD & GPLv2).
> 
> -Pre-Installation Configuration
> -------------------------------
> -
> -Config File Options
> -~~~~~~~~~~~~~~~~~~~
> -
> -The following options can be modified in the ``config`` file.
> -
> -- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV`` (default ``y``)
> -
> -  Toggle compilation of the ``lrte_pmd_dpaa2_qdma`` driver.
> 
>  Enabling logs
>  -------------
> @@ -72,16 +61,6 @@ For enabling logs, use the following EAL parameter:
>  Using ``pmd.raw.dpaa2.qdma`` as log matching criteria, all Event PMD logs
> can be  enabled which are lower than logging ``level``.
> 
> -Driver Compilation
> -~~~~~~~~~~~~~~~~~~
> -
> -To compile the DPAA2 QDMA PMD for Linux arm64 gcc target, run the -
> following ``make`` command:
> -
> -.. code-block:: console
> -
> -   cd <DPDK-source-directory>
> -   make config T=arm64-dpaa-linux-gcc install
> 
>  Initialization
>  --------------
> diff --git a/doc/guides/rawdevs/ifpga.rst b/doc/guides/rawdevs/ifpga.rst
> index a3d92a62ea..dbd0d6e37d 100644
> --- a/doc/guides/rawdevs/ifpga.rst
> +++ b/doc/guides/rawdevs/ifpga.rst
> @@ -76,16 +76,6 @@ summarized by the following block diagram::
>       |        vdev_ifpga_cfg driver       |        |  Intel FpgaDev  |
>       +------------------------------------+        +-----------------+
> 
> -Build options
> --------------
> -
> -- ``CONFIG_RTE_LIBRTE_IFPGA_BUS`` (default ``y``)
> -
> -   Toggle compilation of IFPGA Bus library.
> -
> -- ``CONFIG_RTE_LIBRTE_IFPGA_RAWDEV`` (default ``y``)
> -
> -   Toggle compilation of the ``ifpga_rawdev`` driver.
> 
>  Run-time parameters
>  -------------------
> diff --git a/doc/guides/rawdevs/ioat.rst b/doc/guides/rawdevs/ioat.rst index
> c46460ff45..b1b10c7fad 100644
> --- a/doc/guides/rawdevs/ioat.rst
> +++ b/doc/guides/rawdevs/ioat.rst
> @@ -54,13 +54,7 @@ shows:
>  Compilation
>  ------------
> 
> -For builds done with ``make``, the driver compilation is enabled by the -
> ``CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV`` build configuration option.
> This is -enabled by default in builds for x86 platforms, and disabled in other -
> configurations.
> -
> -For builds using ``meson`` and ``ninja``, the driver will be built when the -
> target platform is x86-based.
> +The driver will be built when the target platform is x86-based.
> 
>  Device Setup
>  -------------
> diff --git a/doc/guides/rawdevs/ntb.rst b/doc/guides/rawdevs/ntb.rst index
> aa7d809649..0589b70087 100644
> --- a/doc/guides/rawdevs/ntb.rst
> +++ b/doc/guides/rawdevs/ntb.rst
> @@ -30,12 +30,6 @@ is
> https://www.intel.com/content/dam/support/us/en/documents/server-
> products/Int
>  - Disable PCIe PII SSC (Spread Spectrum Clocking) for both hosts. This
>    is a hardware requirement.
> 
> -Build Options
> --------------
> -
> -- ``CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV`` (default ``y``)
> -
> -   Toggle compilation of the ``ntb`` driver.
> 
>  Device Setup
>  ------------
> diff --git a/doc/guides/rawdevs/octeontx2_dma.rst
> b/doc/guides/rawdevs/octeontx2_dma.rst
> index 4a9794489e..6887da5278 100644
> --- a/doc/guides/rawdevs/octeontx2_dma.rst
> +++ b/doc/guides/rawdevs/octeontx2_dma.rst
> @@ -26,18 +26,6 @@ Prerequisites and Compilation procedure
>     See :doc:`../platform/octeontx2` for setup information.
> 
> 
> -Pre-Installation Configuration
> -------------------------------
> -
> -Config File Options
> -~~~~~~~~~~~~~~~~~~~
> -
> -The following options can be modified in the ``config`` file.
> -
> -- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV`` (default ``y``)
> -
> -  Toggle compilation of the ``lrte_pmd_octeontx2_dma`` driver.
> -
>  Enabling logs
>  -------------
> 
> diff --git a/doc/guides/rawdevs/octeontx2_ep.rst
> b/doc/guides/rawdevs/octeontx2_ep.rst
> index b03fcf789a..fb9d346ccf 100644
> --- a/doc/guides/rawdevs/octeontx2_ep.rst
> +++ b/doc/guides/rawdevs/octeontx2_ep.rst
> @@ -18,14 +18,6 @@ This OCTEON TX2 End Point mode PMD supports
> 
>  #. Packet Output - OCTEON TX2 to Host with info pointer mode.
> 
> -Config File Options
> -~~~~~~~~~~~~~~~~~~~
> -
> -The following options can be modified in the ``config`` file.
> -
> -- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV`` (default ``y``)
> -
> -  Toggle compilation of the ``lrte_pmd_octeontx2_ep`` driver.
> 
>  Initialization
>  --------------
> --
> 2.17.1

Acked-by: Rosen Xu <rosen.xu at intel.com>
Previous message: [dpdk-dev] [PATCH v5 15/20] doc: remove references to make from rawdevs guides
Next message: [dpdk-dev] [PATCH] hash: build on Windows
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the dev mailing list